纳米ZrO2的合成对负载Ni催化剂的CH4/CO2重整反应的影响

采用共沉淀法、醇热合成法和干法分别合成了纳米ZrO2（ZrO2 CP、ZrO2 ET和ZrO2 S），用XRD、 BET、SEM等对其结构和表面性质进行表征，以CH4/CO2重整为探针反应研究了不同方法合成的纳米ZrO2负载Ni催化剂的催化性能，并与载体的物化性质进行了关联。实验结果表明，以干法合成的纳米介孔ZrO2 S具有较大的比表面积（133m2/g）和较好的孔径分布(4.9nm)，Ni/ZrO2 S催化剂在CH4/CO2重整反应中表现出较好的催化性能。     

2-巯基苯并咪唑保护的铜纳米团簇的制备及银离子检测

以2-巯基苯并咪唑为保护剂,聚乙烯吡咯烷酮为稳定剂,水合肼为还原剂,“一锅法”合成2-巯基苯并咪唑保护的,高稳定性、强荧光、大斯托克斯位移的铜纳米团簇(Cu NCs),并用于检测水样中的银离子含量。采用透射电子显微镜(TEM)和X射线光电子能谱(XPS)对铜纳米团簇的结构进行表征,通过荧光光谱和紫外可见光谱对其光学性能进行研究。研究表明:该铜纳米团簇的最大激发和发射波长分别为340和558 nm,在日光灯和紫外灯下分别为无色和橙色。Cu NCs具有较高的分散性,尺寸大小为2~3 nm。在最佳反应条件下,铜纳米团簇可以选择性地被银离子猝灭,且灵敏度高,线性范围为1~40μmol/L,检测限为0.5μmol/L。该方法用于检测实际水样(自来水、湖水)中银离子的浓度,结果令人满意,表明在环境监测中有非常高的应用价值。     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.     

1,3-二羧甲基咪唑盐酸盐热分解过程研究

离子液体是继超临界流体之后的一类新的绿色溶剂,因其具有一系列独特的性质,作为溶剂和反应介质已广泛应用于有机合成、催化反应工程、电化学、分离分析等领域.随着研究和应用的逐渐深入,仅仅将离子液体作为溶剂和反应介质已不能满足要求,使离子液体带上某些官能团,从而赋予其特定的功能,是相关领域的一个研究热点.1,3-二取代咪唑盐是一类常用的离子液体,对其功能化具有重要意义.1,3-二羧甲基咪唑的制备简单,将它与不同的酸如盐酸、磷酸、硼酸等进行反应,可得到对称二羧甲基取代的咪唑盐.这类咪唑盐作为缩聚单体与二醇或二胺反应,可得到每个重复链节上都含有咪唑阳离子的新的功能性聚酯或聚酰胺;如果用其掺杂导电聚苯胺,因其挥发性低则有可能大大提高聚苯胺的导电寿命.     

球笼烯（C_（60）／C_（70）载体钕系催化丁二烯聚合的研究

球笼烯（Ｃ_（６０）／Ｃ_（７０）载体钕系催化丁二烯聚合的研究赵春英，陈滇宝，仲崇祺，董文寰，徐玲，唐学明（青岛化工学院高分子材料系青岛２６６０４２）杨海滨，李明辉，邹广田（吉林大学超硬材料国家重点实验室长春１３００２３）关键词球碳载体钕系催化剂，聚丁...     

Self-assembling of helical poly(phenylacetylene) carrying L-valine pendants in solution, on mica substrate, and on water surface

In the present work, we investigated self-assembling of a poly(phenylacetylene) carrying L-valine pendants (PPA-Val) in a water/methanol solution, upon evaporation of the solution on mica, and on the water surface. With intercalation of a fluorescence probe of Ru(phen)2(dppx)2+ (phen = 1,10-phenanthroline, dppx=7,8-dimethyldipyridophenazine) into the hydrophobic cavities associated by the PPA-Val chains, their helical structures were directly detected in solution with an in situ fluorescence microscope. Helical aggregates were observed with AFM upon evaporation of the solvents, suggesting that the helical structures in the solution are the building blocks of the helical aggregates. Self-assembling structures of PPA-Val on the water surface were, however, very different from that formed upon evaporation of its THF solution on the mica surface. The polymer chains associated into a monolayer of extended fibers on the water surface, whereas superhelical fibers formed on the mica surface. Water molecules play a critical role in inducing the polymer to form diverse morphological structures in its bulk solution and on its surface. In solution, the isotropic hydrophobic effect drove the polymer chains to form superhelical aggregates, while on the water surface, the hydrophobic effect concentrated mainly on the lateral part of the polymer, thus giving a monolayer of extended fibers.     

Synthesis of Novel Benzo-15-Crown-5-Tethered β-Cyclodextrins and Their Enhanced Molecular Binding Abilities by Alkali Metal Cation Coordination

Two novel benzo-15-crown-5 tethered β-cyclodextrins 1 and 2have been synthesized by coupling substituted benzo-15-crown-5 with correspondingβ-cyclodextrin derivatives. Their inclusion complexation behavior withrepresentative guests, such as cyclohexanol, cyclohexane carboxylic acid, cyclohexaneacetic acid, sodium cyclohexane carboxylate, and potassium cyclohexane carboxylate,was investigated in aqueous solution by means of fluorescence spectrometry. As compared with parent β-cyclodextrin, benzo-15-crown-5 tethered β-cyclodextrins 1–2 display significantly enhanced molecular binding abilities and selectivities towards model substrates, especially towards substrates containing alkali-metal cations. These results indicate that, bearing two recognition sites in a single molecule, these supramolecular architectures can strongly enhance the molecular binding ability of parent β-cyclodextrin by the cooperative binding of the β-cyclodextrin cavity and the crown ether moiety. Possessing a shorter linker, crown ether-β-cyclodextrin 2 shows much higher binding affinity with guest molecules than crown ether-β-cyclodextrin 1, which may be attributed to the binding size and molecular multiple recognition behavior between host and guest.     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.