四磺酸基酞菁锌在水和非水溶剂中的电化学性质研究

在非水溶剂（二甲基亚砜（ＤＭＳＯ）及Ｎ,Ｎ＿二甲基甲酰胺（ＤＭＦ））中的伏安曲线．呈现三对电流峰,表明存在三个可逆或准可逆酞菁配体的单电子转移过程,而在水溶液中则不呈现准可逆行为,且波形改变很大．此外,还比较了四磺酸基酞菁锌的水溶液在自然光和红光（６００～７００ｎｍ）照射下的循环伏安曲线,其氧化还原峰的数目和峰电位基本不变,但在红光照射下比自然光照射下的峰电流明显增大．     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

2,2′-对苯二甲硫基二乙酸配合物的合成及表征

本文报道了配体 2 ,2′-对苯二甲硫基二乙酸和过渡金属铜 ( )、钴 ( )、镍 ( )配合物的合成。经元素分析、X射线衍射分析、红外光谱、差热 -热重分析等推算了它们的组成并指认了谱带的归属。对铜 ( )配合物进行了电子顺磁共振谱研究。     

Frictional properties of dilute block-copolymer solutions and homopolymer solutions. Application to molecular weight determination.

An equation for the translational diffusion coefficient of block copolymers in dilute solution has been obtained by modifying Zimm's equation for homopolymers to take into account the existence of dissimilar segments in block copolymers. Illustrative calculations for homopolymers and block copolymers have been made and the results for homopolymers have been compared with experiments and with the calculations of Yamakawa and Fujii. A procedure has been proposed to determine the molecular weight of a block copolymer from measurements of its limiting viscosity number and its sedimentation coefficient or translational diffusion coefficient.     

Gamma-Ray Induced Polymerization of Vinyl Monomers in Bagasse

Vinyl monomers such as vinyl acetate, vinyl chloride, methyl methacrylate and styrene etc., can be polymerized without catalyst into the composites of bagasse material by gamma-radiation induced in situ liquid polymerization process. The fundamental factors, such as polymerization-rate, effect of swelling agent, molecular weight of vinyl polymers and graft reaction between bagasse cellulose and vinyl polymers, have been investigated and discussed. The use of suitable low G-value polar swelling agents and the application of suitable gamma dose-rate are two key factors found to control the smooth in situ liquid polymerization system of vinyl monomers in bagasse.     

Core/shell nanocomposite based on the local polarization and its electrorheological behavior

Aimed at the increase of electrorheological effect, a novel core/shell material was prepared by the combination of mechanochemical activity and sol-gel technique. The structure analyses X-ray diffraction, Fourier transform infrared spectrometry, scanning electron microscopy, and energy-dispersive spectrometry showed that a modified kaolinite/titanium oxide nanocomposite consisted of the mechanochemically activated kaolinite/NaCl complex coated by titanium oxide. A distinct enhancement of the electrorheological activity was found by using such particles dispersed in silicone oil than those of kaolinite or titanium oxide alone under a direct current electric field. Modified kaolinite/titanium oxide electrorheological fluid has a larger dielectric constant enhancement deltaepsilon', and a strong interfacial polarization occurs with a clear dielectric loss peak around 2 kHz. Doping NaCl into the core (kaolinite) by the mechanochemical activation and limiting the transferring of the ions by the shell (titanium oxide) may increase the interfacial polarizability of particles and induce a high electrorheological effect.     

Structural and bonding characteristics in transition metal-silane complexes

Transition metal-silane complexes containing metal-eta 2-H-Si coordination display different structural and bonding characteristics in comparison to other sigma-complexes, such as dihydrogen and alkane (agostic) complexes. The different characteristics can be related to the strong sigma*-accepting properties of the eta 2-silane ligand(s) because of the weaker H-Si sigma bond. Various examples of metal-silane complexes have been reviewed and their structural stabilities have been systematically discussed. Silyl-hydride complexes having substantial silyl-hydrido interactions have also been emphasized.     

Electronic-to-vibrational energy transfer reactions.X* + CO (X = O,I and Br)

The vibrational distribution of CO produced from the following two electronic-to-vibrational energy transfer reactions:

have been determined by means of infrared resonance absorption measurements employing a cw CO laser. The CO molecules formed in both reactions were found to be vibrationally excited up to the limits of available electronic energies carried by the excited atoms. A similar result was also observed in the Br(4²P_{$\text{1}\text{2}$}) + CO reaction, in which absorption occurred only in the 1 → 2 band. For the O^* + CO reaction the efficiency of E → V energy transfer was determined to be 16%. Our present results were found to be inconsistent with the impulsive (half-collision) model.     

A light-driven rotaxane molecular shuttle with dual fluorescence addresses

[reaction: see text] A molecular shuttle containing an alpha-CD macrocycle, an azobenzene unit, and two different fluorescent naphthalimide units was synthesized. The cis-trans photoisomerization of the azobenzene unit resulted in the motion of the CD macrocycle on the track. Because of the easy regulation and full reversibility of the fluorescence change of the two stopper units, the molecular shuttle could be used as a molecular storage medium or switch with all-optical inputs and outputs.