A novel approach to carbon hollow spheres and vessels from CCl4 at low temperatures

Carbon hollow spheres (400-600 nm) and vessels (400 nm x 3000 nm) have been synthesized from sp3-CCl4 at 190 and 230 degrees C, respectively. The HRTEM images and Raman spectra reveal the sp2 nature of the as-obtained products, indicating that the transformation from carbon sp3 to sp2 occurs in the reactions. The possible mechanism has also been proposed.     

Investigation on relation between TL and OSL of Li2B4O7:Cu, In

Polycrystal Li₂B₄O₇ (LBO) doped with Cu and In was prepared and then sintered at different temperatures. X-ray diffraction (XRD) was applied to get the parameters of the LBO structure, thermoluminescence (TL) and optically stimulated luminescence (OSL) were measured, and a second-order exponential decay model was fitted to the OSL decay curves. The results indicate that the original number of OSL traps that have captured electroncs is linearly related with the sum of TL decay during the OSL process. Mean decay constant of OSL is related to the sintered temperature. The possible reason is that the sintered temperature affects the crystal sizes of the polycrystal, and consequently affects the stimulating lights’s intensity and the photoionization cross-section of the electrons, which have been captured by the traps. __________ Translated from Acta Scientiarum Naturalium Universitatis Sunyatseni, 2005, 44(4) (in Chinese)     

Novel preparation of organic polymer-based monolithic column by microwave irradation

Microwave irradiation was firstly attempted for the preparation of organic-based monoliths of poly（styrene-divinylbenzene- methacrylic acid）, which single step in situ polymerization was carried out during 15 min. The colunm permeability, electrophoretic and chromatographac behaviors were comparatively evaluated using pressure-assisted CEC, GEC and low pressure-driven separation modes. The largest theoretical plates for the preparing column could be close to 18,0000 plates/m for thiourea in the mode of p-CEC. It provided a viable alternative to traditional initiation means for the perparation of monolithic capillary columns.     

丹宁纤维素富集-氢化物发生ICP-AES同时测定水中痕量锗

研究了丹宁纤维素富集10~(-11)g/ml级锗的条件,并考察了地下水中36种共存离子对磷酸介质中氢化物发生ICP-AES测定锗的干扰和消除,应用于测定地下水中的超痕量锗,结果满意,检出限为15ng/L。     

A mesoporous template route to the low-temperature preparation of efficient green light emitting Zn2SiO4:Mn phosphors

Green light emitting Zn2SiO4:Mn phosphors have been prepared via a low-temperature solid-state reaction using mesoporous silica SBA-15 template. This mesoporous silica template method features low-temperature formation of phosphors and easy doping. The structure and morphology of the phosphors were characterized by XRD, SEM, TEM, and N2 adsorption/desorption techniques, which confirmed the single crystallinity, ordered mesostructure, closed pore channels, and elongated ropelike morphology. The luminescent properties were examined by photoluminescence spectroscopy at room temperature, and the results of fluorescence decay time measurements show non-single-exponential decay behavior and a decrease of the decay time with an increase of the Mn concentration.     

Modeling of the relationship between electroosmotic flow and separation parameters in capillary zone electrophoresis using artificial neural networks and experimental design

The prediction of migration time of electroosmotic flow (EOF) marker was achieved by applying artificial neural networks (ANN) model based on principal component analysis (PCA) and standard normal distribution simulation to the input variables. The voltage of performance, the temperature in the capillary, the pH and the ionic strength of background electrolytes (BGE) were applied as the input variables to ANN. The range of the performance voltage studied was from 15 to 27 kV, and that of the temperature in the capillary was from 20 to 30 °C. For the pH values studied, the range was from 5.15 to 8.04. The range of the ionic strength investigated in this paper was from 0.040 to 0.097. The prediction abilities of ANN with different pre-processing procedure to the input variables were compared. Under the same performance conditions, the average prediction error of the migration time of the EOF marker was 5.46% with RSD = 1.76% according to 10 parallel runs of the optimized ANN structure by the proposed approach, and that of the 10 parallel predictions of the optimal ANN structure for the different performance conditions was 12.95% with RSD = 2.29% according to the proposed approach. The study showed that the proposed method could give better predicted results than other approaches discussed.     

羧基丙烯酸酯涂料合成及其防雾性能研究

采用种子乳液聚合法合成了一种互穿网络型羧基丙烯酸酯类聚物乳液，研究了加料方式对羧基分布的影响，结果表明丙烯酸加入到核单体中有利于羧基分布在乳胶粒表面。在体系中引入离子键交联结构提高了乳液涂料的硬度和耐水性能，离子键交联ＰＩＬＮ型涂料具有优良的防雾性能。     

纳米微晶Y_2Sn_(2-x)FexO_(7-δ)的制备及其催化选择性能研究

采用共沉淀并加法制备了Ｂ位掺杂烧绿石型稀土复合氧化物纳米微晶Ｙ２Ｓｎ２－ｘＦｅｘＯ７－δ（ｘ＝００～１０）。制备的纳米微晶属于立方晶系，Ｆｄ３ｍ，晶胞参数与掺杂量呈线性关系。通过Ｍｓｂａｕｅｒ、ＴＧＤＴＡ，气相色谱和γ射线辐照等技术研究了纳米微晶对ＣＯ的催化选择性能。结果表明，纳米微晶对ＣＯ的催化选择性明显高于一般粉料对ＣＯ的选择性；纳米微晶对ＣＯ的选择性与掺杂量有关；未辐照的纳米微晶，当掺杂量ｘ＝０６时，其对ＣＯ的选择性为最高，辐照后的纳米微晶，当掺杂量ｘ＝０４时，其对ＣＯ的选择性为最高     

Enatiomeric analysis of simendan by CE with beta-CD as chiral selector compared with CMPA-HPLC

The chiral separation of simendan enantiomers using capillary electrophoresis was studied with beta-cyclodextrin (beta-CD) as chiral selector. The influences of the concentration and pH of borate buffer solution, beta-CD concentration and methanol content in the background electrolyte were investigated. These factors were compared with those in an HPLC with beta-CD as chiral mobile phase additive (CMPA-HPLC). The quantification properties of the developed CE method were examined. A baseline separation of simendan enantiomers was achieved in the background electrolyte of 20 mmol/L borate buffer (pH 11.0) containing 12 mmol/L beta-CD-methanol (50:50 in volume ratio). The CE method is comparable with CMPA-HPLC in chiral resolution, although the optimal pH in CE (11.0) is much higher than that (6.0) in CMPA-HPLC. This chiral CE method is applicable to the quantitative ananlysis and enantiomeric excess value determination of L-simendan.