Thermo-optical study of UV cured polyether urethane diacrylate films with dispersed octadecanol

Thermally reversible light scattering (TRLS) films are prepared from ultraviolet (UV) curing of polyether urethane diacrylate (PEUDA) with dispersed low molecular weight 1-octadecanol (OD). Depending on the temperature, the OD domains are crystalline or amorphous and this produce opaque or transparent films in a reversible way. Stable optically transparent and light scattering states are obtained after 100 successive heating–cooling cycles. Moreover, morphologies of the OD domains could be varied significantly with the cure temperature and this led to notable discrepancy in optical properties. By using an UV-mask and curing in two steps at different temperatures, complex patterns could be recorded in the film that were encoded at high temperatures (60 °C) and revealed at low temperatures (i.e., at room temperature), which makes the film a candidate for thermo-optical recording medium.     

Solubility and Solution Thermodynamic Properties of 4-(4-Hydroxyphenyl)-2-butanone (Raspberry Ketone) in Different Pure Solvents

The solubility of 4-(4-hydroxyphenyl)-2-butanone (raspberry ketone) in six pure solvents was experimentally determined at temperatures ranging from 283.15 to 313.15 K under the pressure 0.10 MPa by employing a gravimetrical method. The experimental results indicate that the solubility of raspberry ketone in all studied solvents is temperature dependent, a rise in temperature brings about an increase in solubility. The experimental solubility data of raspberry ketone in six pure solvents (acetone, ethanol, ethyl acetate, n-propyl alcohol, n-butyl alcohol, and distilled water) was correlated by using several commonly used thermodynamic models, including the Apelblat, van’t Hoff and λh equations. The results of the error analysis indicate that the van’t Hoff equation was able to give more accurate and reliable predictions of solubility with root-mean-square deviation less than 0.56%. Furthermore, the changes of dissolution enthalpies (Δ_diss H°), dissolution entropies (Δ_diss S°) and dissolution Gibbs energies (Δ_diss G°) of raspberry ketone in the solvents studied were estimated by the van’t Hoff equation. The positive value of Δ_diss H°, Δ_diss S°, and Δ_diss G° indicated that these dissolution processes of raspberry ketone in the solvents studied were all endothermic and enthalpy-driven.     

{[Eu(ox)(H2O)4]·[CuBr(2‐pzc)2]·4H2O}: Hydrogen Bonding Directed Assembly to Supramolecular Network

A new 3d–4f heterometallic coordination framework, {[Eu(ox)(H₂O)₄] · [CuBr(2‐pzc)₂] · 4H₂O} ( 1 ) [ox = oxalate; 2‐pzc = pyrazine‐2‐carboxylate] was synthesized and characterized by elemental analysis, IR spectroscopy and thermal analysis, as well as single‐crystal X‐ray diffraction. Complex 1 represents one 3D supramolecular heterometallic coordination framework that is assembled from rare lanthanide‐ox anionic chains and CuBr(2‐pzc)₂ cationic units through hydrogen bonds.     

Electrodeposition behavior of Mg with Zn from acidic sulfate solutions

Electrodeposition of Mg with Zn in acidic sulfate solutions with polyethylene glycol and octadecyl dimethyl benzyl ammonium chloride as additives was investigated by scanning electron microscopy, X-ray diffraction, and potentiodynamic polarization techniques. The results show that these two compounds act in a synergetic way to suppress Zn deposition markedly and facilitate Mg reduction. Zn–0.46%Mg coatings are produced under high cathodic current densities, which have lower corrosion potentials than Zn coatings and hydrogen evolution in neutral chloride solutions. Magnesium hydroxide may cause current oscillations at high cathodic polarizations in plating solutions without zinc salts due to its formation and peel-off. An “induced co-deposition” mechanism is proposed for Zn–Mg alloy electrodeposition.     

Mesoscale Surface Patterning of a Laterally‐Grafted Rod Amphiphile: Rings And Fibers

An aromatic amphiphilic molecule based on branched oligo(ethylene oxide) was synthesized. Evaporation‐driven ring formation and Langmuir–Blodgett films are investigated by utilizing this rigid–flexible block molecule. The size of the rings is strongly dependent on the solvent evaporation rate and the concentration of the molecule. In case of fast evaporation, volcano‐like rings are formed by evaporating solution of high concentration. Perfectly symmetrical rings with diameters in the range of 2–6 μm are obtained by evaporating solution of low concentration. The formation mechanism of the ring is briefly discussed. The molecule at the air–water interface exhibits excellent amphiphilic properties. Upon transferring the monolayer onto solid substrates, AFM revealed the formation of fine and long, straight fibers. By combining the data obtained from the isotherms, AFM, water contact angle measurements, and UV/Vis and fluorescence spectra, the fibers are suggested to be formed by π–π stacking interaction of the aromatic rod segments as the oligo(ethylene oxide) branches are submerged in the water subphase upon compression. The fiber formation is associated with the transformation of the aromatic rod segments from the face‐on conformation to the edge‐on conformation.     

An ab initio simulation of the UV/Visible spectra of substituted chalcones

The electronic absorption spectra of 29 phenyl-ring substituted chalcones have been investigated with the time-dependent density functional theory (TD-DFT) and polarizable continuum TD-DFT (PCM-TD-DFT). It turns out that the hybrid PBE1PBE functional with the 6-31G basis set provide reliable λ_max when the solvent effects are included in the model. Comparisons with experimental values lead to a mean absolute error of 12 nm (0.136 eV). Moreover, the observed substituent effects are reproduced by calculation qualitatively. The λ_max of substituted chalcone in phenyl ring A is less sensitive to substitution than that in ring B. The linear correlation of Hammett’s substituent constants (σ_P) with LUMO energies is better with respect to HOMO energies. The calculation reveals that the maximum absorption band mainly results from the π→π* transition from HOMO to LUMO. The analysis of the electron density plots of frontier molecular orbitals show that most transitions should be of valence excitation nature.      

聚合物纳米微粒静电组装行为及其表征

使用2,2′-偶氮二异丁基脒二盐酸盐自由基引发剂,改变甲基丙烯酰氧乙基十六烷基二甲基溴化铵阳离子功能单体的量与苯乙烯进行乳液聚合获得不同粒径的阳离子乳胶粒,使用十二烷基硫酸钠为乳化剂和过硫酸钾为引发剂制备阴离子聚合物乳胶粒.采用基于静电相互作用的异凝聚法将以上2种带有相反电荷的乳胶粒组装,获得了表面粗糙程度不同的复合微粒.对异凝聚过程中复合液透光率和微粒大小及分布进行跟踪测试,并用透射电子显微镜表征了阳离子微粒、阴离子微粒以及复合微粒的形态和大小.结果表明,在一定范围内可以通过控制阴离子乳胶粒与阳离子乳胶粒的复合比例改变单个复合微粒表面阳离子小微粒的数目.     

All-fiber polarization locked vector soliton laser using carbon nanotubes

We report an all-fiber mode-locked erbium-doped fiber laser (EDFL) employing carbon nanotube (CNT) polymer composite film. By using only standard telecom grade components, without any complex polarization control elements in the laser cavity, we have demonstrated polarization locked vector solitons generation with duration of ~583 fs, average power of ~3 mW (pulse energy of 118 pJ) at the repetition rate of ~25.7 MHz.     

Crystal growth and morphology of hindered phenol AO-60

Crystal growth of a hindered phenol compound, tetrakis [methylene-3-(3-5-ditert-butyl-4-hydroxy phenyl) propionyloxy] methane (trade name AO-60), was successfully recorded by optical microscopy (OM) equipped with a hot stage. The morphology of AO-60 crystals, grown at 100 °C from amorphous state, appeared in the form of tetragonal-sloped step growth. Further study using scanning electron microscopy (SEM) and atomic force microscopy (AFM) experimentally demonstrated that AO-60 crystals had a hopper-like morphology, which had occurred rarely in the condition of organic compound crystals but predominantly rather to inorganic compound crystals in the reported literatures. The morphological features observed on the crystal surfaces suggested step growth and hopper growth mechanism. Besides, a raising around the edge of the AO-60 hopper crystal was also experimentally characterized for the first time.