活性炭对丙烯酰胺单体水溶液的精制作用

活性炭对丙烯酰胺单体水溶液的精制作用李瑛＊孙文霞季鸿渐郭淑玲＊＊申花英＊＊（中国科学院长春应用化学研究所长春１３００２２）关键词丙烯酰胺，精制，活性炭１９９６－１２－１３收稿，１９９７－０６－１６修回国家“八五”攻关项目专题＊＊现在大庆油田管理局化...     

新显色剂对溴苯酚偶氮若丹宁光度法测定Au（Ⅲ）的研究

提出了以显色剂对溴苯酚偶氮若丹宁[5-(5-溴-2-羟基苯偶氮)若丹宁]作为光度法测定Au(Ⅲ)试剂的新方法。在1.2mol·L~(-1)盐酸介质及阴离子表面活性剂十二烷基苯磺酸钠(SDBS)存在下,Au(Ⅲ)与试剂形成桔红色配合物,545nm处有最大吸收,摩尔吸光系数ε为7.75×10~4,Au(Ⅲ)浓度在0～44μg/25ml范围内服从比耳定律。方法灵敏度高,选择性好,配合物的稳定时间长,操作简便,已成功地应用于含金废水中Au(Ⅲ)的测定。     

A comparison of polymerization characteristics and mechanisms of ε-caprolactone and trimethylene-carbonate with rare earth halides

Characteristics and mechanisms of the ring opening-polymerizations of ε-caprolactone (CL) and trimethylene carbonate (TMC) with rare earth halides have been compared for the first time. It has been found that rare earth halides show high catalytic activities for the polymerization of TMC, but very low activities for that of CL polymerization. The copolymerization of CL and TMC can proceed only in the presence of high contents of TMC in the comonomer feed. The copolymerization rate decreases rapidly with increasing molar fraction of CL in the feed. The mechanism study by IR, ¹H-, ¹³C-, and ³¹P-NMR spectra shows that the first step reaction of the polymerization of TMC or CL with rare earth halide is the complexation of monomer to the rare earth ion. The strong coordination of TMC to rare earth ion induces the ring-cleavage of TMC and generation of the cationic species, which initiate the polymerization of TMC via a cationic process. However, the polymerization of CL with rare earth halide is an “activated-hydrolysis” process, in which rare earth catalyst does not initiate the polymerization but serves as an activator of CL. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1339–1352, 1997     

Effects of poly(methyl methacrylate)-block-poly(vinyl acetate) copolymer on the spinodal decomposition of corresponding homopolymer blends

Effects of adding a small amount of poly(methyl methacrylate)-block-poly(vinyl acetate) (PMMA-b-PVAc) to poly(methyl methacrylate)/poly(vinyl acetate) (PMMA/PVAc) blends with a lower critical solution temperature (LCST) phase diagram on the kinetics of late-stage spinodal decomposition (SD) were investigated by time-resolved light scattering at 160°C. It is found that the coarsening process of the structure was slowed down or accelerated upon addition of PMMA-b-PVAc depending on the composition of the block copolymer and the blend. The effect of the block copolymer on the domain size were interpreted as compatibilizing and incompatibilizing effects of the block copolymer on PMMA/PVAc blends based on the evaluation of changes in the stability limits of PMMA/PVAc with the addition of block copolymer using random phase approximation (RPA).     

Influencing Factors on the Physicochemical Characteristics of Tea Polysaccharides

Tea polysaccharides (TPSs) are one of the main bioactive constituents of tea with various biological activities such as hypoglycemic effect, antioxidant, antitumor, and immunomodulatory. The bioactivities of TPSs are directly associated with their structures such as chemical composition, molecular weight, glycosidic linkages, and conformation among others. To study the relationship between the structures of TPSs and their bioactivities, it is essential to elucidate the structure of TPSs, particularly the fine structures. Due to the vast variation nature of monosaccharide units and their connections, the structure of TPSs is extremely complex, which is also affected by several major factors including tea species, processing technologies of tea and isolation methods of TPSs. As a result of the complexity, there are few studies on their fine structures and chain conformation. In the present review, we aim to provide a detailed summary of the multiple factors influencing the characteristics of TPS chemical structures such as variations of tea species, degree of fermentation, and preparation methods among others as well as their applications. The main aspects of understanding the structural difference of TPSs and influencing factors are to assist the study of the structure and bioactivity relationship and ultimately, to control the production of the targeted TPSs with the most desired biological activity.     

The underlying mechanism for reduction stability of organic electrolytes in lithium secondary batteries

Many organic solvents have very desirable solution properties, such as wide temperature range, high solubility of Li salts and nonflammability, and should be able but fail in reality to serve as electrolyte solvents for Li-ion or -metal batteries due to their reduction instability. The origin of this interfacial instability remains unsolved and disputed so far. Here, we reveal for the first time the origin of the reduction stability of organic carbonate electrolytes by combining ab initio molecular dynamics (AIMD) simulations, density functional theory (DFT) calculations and electrochemical stability experiments. It is found that with the increase of the molar ratio (MR) of salt to solvent, the anion progressively enters into the solvation shell of Li⁺ to form an anion-induced ion–solvent-coordinated (AI-ISC) structure, leading to a “V-shaped” change of the LUMO energy level of coordinated solvent molecules, whose interfacial stability first decreases and then increases with the increased MRs of salt to solvent. This mechanism perfectly explains the long-standing puzzle about the interfacial compatibility of organic electrolytes with Li or similar low potential anodes and provides a basic understanding and new insights into the rational design of the advanced electrolytes for next generation lithium secondary batteries.

By theoretical and experimental evidence, the underlying mechanism for the enhanced reduction stability of the HMRE is revealed, suggesting that the interfacial stability of the electrolyte can be adjusted through the modulation of the anion-induced ISC structure.

The state-of-the-art electrolytes in Li-ion batteries (LIBs) are mostly based on 1.0 mol L⁻¹ LiPF₆/ethylene carbonate (EC)-based carbonate due to the surface passivation of the graphite anode by forming a stable solid electrolyte interphase (SEI). However, these electrolytes cannot operate well for new electrode materials and battery systems that are expected to have higher voltage, better safety and wider temperature range than current commercial LIBs.^1–3 For example, EC-based carbonate electrolytes are easily oxidized on a high voltage cathode at or above 4.3 V, resulting in depletion of electrolytes, gas evolution and low coulombic efficiency, which reduce the cycle life and create safety hazards for LIBs.⁴ These problems of the conventional electrolyte significantly hinder the development of new generation lithium batteries and limit these batteries for high voltage and/or high capacity applications and operation in a wide temperature range.To overcome these problems, great efforts have been devoted in recent years to the development of new electrolytes, such as solid state electrolytes,⁵ ionic liquids,^6–8 highly-concentrated electrolytes (HCEs),⁹ electrolyte stabilizing additive,^10–13 and so on. Among them, the HCEs or high-molar-ratio electrolytes (HMREs) of salt to solvent have received particular attention, owing to their unusual electrochemical stability, nonflammability, and good compatibility with a wide range of anode and cathode materials.^14–17 These desirable properties are apparently attributed to the solution structure of HCEs, where there exist almost no free solvent molecules, and the parasitic side reactions of solvents are thereby greatly reduced. Due to the lack of solvent molecules in HCEs, anions have to enter into the solvation shell of Li⁺, in order to meet the Li⁺ coordination number of 4–6, to form an ion–solvent-coordinated (ISC) structure.¹⁸ Several studies have shown that the unique ISC structure of HCEs leads to the shift of the lowest unoccupied molecular orbital (LUMO) from solvent to salt, which makes anions preferentially reduced or decomposed to produce a robust anion-derived SEI.^14,19 In recent years, the anion-derived SEI structure has been regarded as the “holy grail” of electrolyte chemistry for understanding the interfacial stability and compatibility of HCEs. However, recent studies have showed that some HCEs containing non-film-forming salts and solvents can still achieve excellent reversible Li⁺ insertion reactions.²⁰ Therefore, an intrinsic origin for the interfacial stability of HCEs still remains unrevealed. In our previous studies on HCEs or HMREs, their interfacial stability was found to depend predominately on the molar ratio (MR) of salt to solvent rather than the molar concentration.^2,21,22 Thus, the HMREs instead of the HCEs in the following study could more clearly describe the nature of electrolyte stability.In this work, we reveal the correlation between the solvation microstructures and the LUMO energy levels of typical ISC structures in the electrolytes at various MRs with non-film-forming lithium salt (LiClO₄) and organic carbonate solvents (PC, DMC, EMC and DEC) by ab initio molecular dynamics (AIMD) simulations and density functional theory (DFT) calculations. The choice of non-film-forming lithium salt and solvent in this study was aimed to exclude the contribution of the formation of the SEI film to the interfacial stability of the electrolytes. It is found from this study that the LUMO energy level of the ISC structure formed at a low MR is lower than that of pure solvent. With the increase of the MR, anions gradually enter into the first solvation shell of Li⁺ to form the anion-induced ISC (AI-ISC) structure, resulting in the increase of the LUMO energy level that enhances the reduction stability of the electrolyte. Also, it is revealed that the LUMO levels of ISC structures at different MRs are always situated at the coordinated solvent molecules, i.e., the strong reduction stability of HMREs is dominated by the modulation of solvent molecules rather than only the formation of the anion-derived SEI. Such a theoretical insight is further unequivocally evidenced by chemical compatibility experiments in this work. These findings reveal the origin of the greatly improved interfacial stability of HMREs and provide a mechanistic insight into the rational design of stable electrolytes for new generation alkali or alkaline metal based batteries.To investigate the specific ISC microstructures of the electrolytes with different MRs, AIMD simulations were first performed (see computational details in the ESI^†). Taking non-film-forming DEC solvent as an example, three types of electrolytes with MRs of LiClO₄ to DEC = 1 : 10, 1 : 5 and 1 : 2 are considered (Table S1^†). After long-time AIMD simulation, the representative images of the equilibrium structures are shown in Fig. 1a–c. To characterize the solution structures, the radial distribution function g(r) of the electrolyte with different MRs is analyzed (Fig. 1e–g), and the changes in the Li⁺ coordination number with the O atoms of solvents and anions are listed in Fig. 1d. In addition, it should be noted that the total coordination number of Li⁺ always remains around 4, which implies that the stable tetragonal solvation shell structure of Li⁺ does not change in the different MR electrolytes; meanwhile, both the coordination numbers of Li⁺ contributed by the solvent and anion change oppositely. This phenomenon can be corroborated experimentally through infrared spectroscopy (IR) because the C O bond of the carbonate group has a strong IR absorption in the carbonyl region (1650–1850 cm⁻¹) and its IR peak position shifts sensitively with its coordination environment. As shown in Fig. 1h, the IR band of carbonyl groups in pure DEC is located at ∼1741 cm⁻¹, which is shifted to ∼1710 cm⁻¹ in a LiClO₄/DEC (MR = 1 : 10) electrolyte due to the coordination of the O atom in C O with Li⁺. With the increase of the MR of Li⁺/DEC, its IR peak at ∼1741 cm⁻¹ gradually disappears, reflecting a gradual decrease in the number of free DEC molecules. In addition, the IR band of free ClO₄⁻ in a LiClO₄/DEC (MR = 1 : 10) electrolyte is located at ∼931 cm⁻¹, which is shifted to ∼942 cm⁻¹ in the 1 : 2 LiClO₄/DEC electrolyte due to the ionic association of Li⁺ and ClO₄⁻ (Fig. S1^†). Combining AIMD simulations and IR experiments, it can be concluded that with the increase of the MR of the electrolyte, the anions gradually enter into the solvation shell of Li⁺, which modulates the chemical stability of the electrolyte.Open in a separate windowFig. 1Snapshots of typical equilibrium trajectories from DFT-MD simulations: (a) 1 : 10 LiClO₄/DEC solution (2-LiClO₄/20-DEC), (b) 1 : 5 LiClO₄/DEC solution (3-LiClO₄/15-DEC) and (c) 1 : 2 LiClO₄/DEC solution (7-LiClO₄/14-DEC). (d) Typical ISC structure extracted from DFT-MD. (e–g) Radial distribution function of lithium–oxygen interaction (short dashed lines) and relationship between the coordination number and bond distances (full lines). (h) FTIR spectra of the carbonyl group in LiClO₄/DEC solution. Atom color: H, white; Li, purple; C, cyan; O, red; Cl, green.Coordination numbers (n(r)) of atom pairs of Li–O(DEC) and Li–O (ClO₄⁻) (cut-off length of r = 2.5 Å)

Decreased expression of ATF3, orchestrated by β-catenin/TCF3, miR-17-5p and HOXA11-AS,promoted gastric cancer progression via increased β-catenin and CEMIP

ATF3 has been reported to be dysregulated in various cancers and involved in various steps of tumorigenesis. However, the mechanisms underlying the abnormal expression of ATF3 and its biological function in gastric cancer (GC) have not been well investigated. Here, we report ATF3 as one of the key regulators of GC development and progression. Patients with low ATF3 expression had shorter survival and a poorer prognosis. In vitro and in vivo assays investigating ATF3 alterations revealed a complex integrated phenotype that affects cell growth and migration. Strikingly, high-throughput sequencing and microarray analysis of cells with ATF3 silencing or of ATF3-low GC tissues indicated alterations in the Wnt signaling pathway, focal adhesions and adherens junctions. Mechanistically, the expression of β-catenin and cell migration inducing hyaluronidase 1 (CEMIP) was significantly upregulated in GC cells with downregulated ATF3, which was synergistically repressed by the β-catenin/TCF3 signaling axis and noncoding RNA miR-17-5p and HOXA11-AS. In addition, we found that WDR5 expression was promoted by TCF3 and is involved in miR-17-5p and HOXA11-AS activation in GC cells. Taken together, our findings revealed the mechanism of ATF3 downregulation and its biological role in regulating the expression of Wnt signaling-related genes during GC progression, suggesting new informative biomarkers of malignancy and therapeutic directions for GC patients.Subject terms: Gastric cancer, Experimental models of disease     

Widely Targeted Metabolomics Analysis Reveals Great Changes in Nonvolatile Metabolites of Oolong Teas during Long-Term Storage

As a semifermented tea, oolong is exceedingly popular worldwide for its elegant, flowery aroma and mellow, rich taste. However, recent marketing trends for old oolong teas and their chemical quality largely remain unexplored. In this study, we applied widely targeted metabolomics using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) combined with multivariate analysis to investigate the chemical change of oolong teas in the aging process. With the increasing of store time, most nongalloylated catechins; tannins, including TFs and proanthocyanidins; flavonols and glycosylated flavonols; amino acids and their derivatives; nucleotides and their derivatives; and lots of alkaloids and phospholipids declined, while most fatty acids and organic acids increased, and galloylated catechins, GA, and caffeine were almost stable. The result also suggested that approximately seven years (but not an infinite extension) was a special period for oolong tea storage, which brings about excellent taste.     

Chemical Fingerprint Analysis and Quantitative Analysis of Saccharides in Morindae Officinalis Radix by HPLC-ELSD

A method based on high performance liquid chromatography with evaporative light scattering detection (HPLC-ELSD) was developed for the quantitative analysis of three active compounds and chemical fingerprint analyses of saccharides in Morindae officinalis radix. Ten batches of Morindae officinalis radix were collected from different plantations in the Guangdong region of China and used to establish the fingerprint. The samples were separated with a COSMOIL Sugar-D column (4.6 mm × 250 mm, 5 μm) by using gradient elution with water (A) and acetonitrile (B). In addition, Trapped-Ion-Mobility (tims) Time-Of-Flight (tims TOF) was used to identify saccharides of Morindae officinalis radix. Fingerprint chromatogram presented 26 common characteristic peaks in the roots of Morinda officinalis How, and the similarities were more than 0.926. In quantitative analysis, the three compounds showed good regression (r = 0.9995–0.9998) within the test ranges, and the recoveries of the method were in the range of 96.7–101.7%. The contents of sucrose, kestose and nystose in all samples were determined as 1.21–7.92%, 1.02–3.37%, and 2.38–6.55%, respectively. The developed HPLC fingerprint method is reliable and was validated for the quality control and identification of Morindae officinalis radix and can be successfully used to assess the quality of Morindae officinalis radix.     

Synthesis,Crystal Structure and Bioactivity of Phenazine-1-carboxylic Acylhydrazone Derivatives

A phenazine-1-carboxylic acid intermediate was synthesized from the reaction of aniline and 2-bromo-3-nitro-benzoic acid. It was then esterified and reacted with hydrazine hydrate to afford phenazine-1-carboxylic hydrazine. Finally, 10 new hydrazone compounds 3a–3j were obtained by the condensation reaction of phenazine-1-carboxylic acid hydrazide and the respective aldehyde-containing compound. The structures were characterized by ¹H and ¹³C NMR spectroscopy, MS and single crystal X-ray diffraction. The antitumor activity of the target compounds in vitro (HeLa and A549) was determined by thiazolyl blue tetrazolium bromide. The results showed that compound (E)-N′-(2-hydroxy-4-(2-(piperidine-1-yl) ethoxy) benzyl) phenazine-1-carbonyl hydrazide 3d exhibited good cytotoxic activity.