Exposure dose assessment and discussion on radioisotope production and application

The exposure dose status on radioisotope production and application in China has been assessed in the paper. The average annual occupational exposure dose received by workers in the radioisotope production is about one tenth of the annual dose limit in normal situation. It is less than one twentieth for workers in the radioisotope applications. However, the annual collective dose for the latter is higher than the former by one oder of magnitude due to the larger number of workers in the application field. Although the output of radioisotopes increased doubly in 1980's as compared with 1970's, the increase on the annual collective dose was not obvious. For exposure to the public,¹³¹I for example, the collective dose in the radioisotope production decreased by one to two orders of magnitude and the releasing factor reduced by two orders of magnitude. Therefore, the exposure dose received by workers in radioisotope production and application is lower in normal situation. However, the facts worth paying attention to are that there were many events and accidents which happened in the radioisotope applications, especially at the irradiation facilities. The probability of fatal accident was as high as 10^–3 per irradiator year. In order to improve the radiation safety situation, it is imperative to conduct the safety assessment for irradiation facilities, to enhance management of the radioactive wastes and spent sources and to establish the experience feedback system.     

Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices

The double-T injector design employed in many microchip capillary electrophoresis devices allows for the formation of very small (50-500 pL) sample plugs for subsequent analysis on-chip. In this study, we show that sample plugs formed at the channel junction can be geometrically defined. The channel width and injector symmetry prove to be of great importance to good performance. A unique pushback of solvent into the side channels can be induced when the side channels have a very low resistance to flow, and this helps to better define the injected sample plug. Samples and running buffers of differing ionic strength (e.g., 10 mM KCl buffer and 20 mM KCl sample) can yield widely variable results in terms of plug shape and amount injected (variations of 1.5 to 10x). Applying bias voltages to all the intersecting channels aids in controlling the plug shape. However, when the ionic strengths of buffer and sample are not matched, the actual amount injected (up to 10x variations) can be inconsistent with the appearance of the plug formed in the injector (up to only 30 % variations). Operating at constant pH and ionic strength produced the most consistent results. This report examines the effects of altering the injector geometry and solution ionic strengths, and presents the results of using bias voltages to control plug formation. The observed results should provide a benchmark for modeling of the fluid dynamics in channel intersections.     

Synthesis of 4-acetylisocoumarin: first total syntheses of AGI-7 and sescandelin

A practical synthetic route to 4-acetylisocoumarins and the first total synthesis of AGI-7 (5) and sescandelin (4) are described. The readily available homophthalate 8 was transformed to the vinylogous amide ester 13 in high overall yield. Upon treatment of 13 with refluxing aqueous formic acid, the desired 4-acetylisocoumarin (5) and its regioisomer 3-methyl-4-formylisocoumarin (17) were produced in a 3:1 ratio. After separation of the desired product (5) from the unwanted minor isomer, the enantioselective reduction of AGI-7 by borane in the presence of Corey's (S)-oxazaborolidine reagent afforded (+)-sescandelin (4) with a 93% ee.     

Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

大孔树脂吸附法处理含苯肼工业废水的研究

以Hz-841大孔树脂为吸附剂,95%乙醇为脱附剂处理含苯肼4000~5000mg/L的工业废水,取得了理想的分离效果,苯肼吸附率>99.8%,树脂工作吸附量40~50g/L。     

Spectrophotometric determination of thorium in food using 2-(2,5-disulfonic-4-methoxyphenylazo)-7-(2-hydroxyl-5-carboxylphenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid

A new highly sensitive and selective chromogenic reagent, 2-(2,5-disulfonic-4-methoxyphenylazo)-7-(2-hydroxyl-5-carboxylphenylazo)-1,8-dihydroxynaphthalene-3,6-disulfonic acid (1), was synthesized and applied to the spectrophotometric determination of trace thorium. In 5 mL of a 6 M perchloric acid medium, which greatly increases the selectivity, thorium reacts with 1 to form a 1: 2 green complex, having a sensitive absorption peak at 670 nm. Under optimal conditions, Beer’s law is obeyed over the range from 0 to 0.8 μg/mL Th(IV) and the apparent molar absorptivity is 2.09 × 10⁵ L/mol cm. It is found that, uranium(VI), Ti(IV), heavy rare earths, and most of other common metal ions do not interfere. The method has been tested on the determination of thorium in food samples with satisfactory results. The text was submitted by the authors in English.     

Electronic effects steer the mechanism of asymmetric hydrogenations of unfunctionalized aryl-substituted alkenes

Density functional theory (PBE and B3LYP) was used to study asymmetric hydrogenations of alkenes catalyzed by an iridium imidazolylidine oxazoline complex. The calculation predicts that the alkene preferentially coordinates to the site trans to the carbene. The coordinated alkene then reacts first with the H2 ligand, then with the hydride to form alkane. Finally, the alkane is released by equilibrating with extrinsic H2 and alkene. Enantioface selectivities for hydrogenations of trisubstituted alkenes seem to be driven primarily by steric interactions with the adamantyl part of the ligand; only the smallest substituents can adopt a site close to it. Application of this theoretical model leads to correct predictions regarding the experimentally observed sense and magnitude of the enantioselectivities.     

Determination of dispersity of crushed granite

Summary Experimental crushed granite column breakthrough curves, using ⁹⁹Tc as spike tracer and ³H as invariant tracer, were analyzed by different linear regression techniques. Dispersity of crushed granite and the retardation factor of ⁹⁹TcO₄^- on the crushed granite were determined simultaneously by one linear regression. Dispersity of crushed granite was also obtained with ³H as invariant tracer by the other linear regression. The dispersities found by spike source and invariant source methods are compared. Experimental results show that the dispersity found by the spike source method is close to that found by the invariant source method. This indicates that dispersity is only a characteristic of the dispersion medium.     

Catalysis of ring-opening and vinyl polymerizations by dicobaltoctacarbonyl

In the presence of Si? H containing cocatalysts, dicobaltoctacarbonyl has been found to very efficiently catalyze the ring-opening polymerization of cyclic ethers, especially epoxides, as well as certain vinyl monomers. The reaction conditions employed are very similar to those used in Co₂(CO)₈ catalyzed hydrogenation and hydrosilylation reactions. Detailed investigations have been carried out to elucidate the nature of the active species for this catalytic system. A cationic mechanism is proposed based on the experimental results of those investigations.     

1,9-Bis(N,N-dimethylaminomethyl)dipyrromethanes in the synthesis of porphyrins bearing one or two meso substituents

A synthesis of 5,15-disubstituted zinc-porphyrins has been developed that employs condensation of a 1,9-bis(N,N-dimethylaminomethyl)dipyrromethane+a dipyrromethane in refluxing ethanol containing zinc acetate followed by oxidation with DDQ. The N,N-dimethylaminomethylation of the dipyrromethane was achieved via Eschenmoser's reagent (N,N-dimethylmethyleneammonium iodide) in CH₂Cl₂ at room temperature. The synthesis is compatible with diverse substituents (e.g., alkyl, aryl, ester, acetal) and enables rapid synthesis of trans-AB-, A₂-, and A-porphyrins. The synthesis of >40 zinc porphyrins has been surveyed; 13 zinc porphyrins were isolated in yields of 5-20% without detectable scrambling.