伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

Poly(methyl methacrylate)/silica/titania ternary nanocomposites with greatly improved thermal and ultraviolet-shielding properties

Poly(methyl methacrylate) (PMMA)/silica/titania ternary nanocomposites with covalent bonding interaction between polymer and inorganic phases have been prepared using a novel non-hydrolytic sol-gel method. Transmission electron microscope (TEM) image of silica/titania binary inorganic component indicates a core-shell-like structure. Scanning electron microscope (SEM) images suggest that the well dispersed silica/titania particles in the hybrid are on the nanometer-scale. The transparencies of nanocomposites are maintained in visible region while the absorption band in ultraviolet (UV) region is red shifted with increasing inorganic content. The thermogravimetric analysis (TGA) results show that the thermal stability of PMMA copolymer increases dramatically with the addition of silica/titania moieties both in nitrogen and in air.     

526例儿童指血微量元素检测结果分析

为了解吐哈油区婴幼儿体内钙、铁、锌、铜、镁的含量,使用多通道原子吸收光谱仪对门诊体查的526例0~7岁幼儿指血检测了钙、铁、锌、铜、镁。结果表明,各个年龄组中缺铁均居第一位,缺钙居第二位,缺锌居第三位,年龄越小,这3种元素含量越低。提示婴幼儿生长发育快,易缺钙,铁,锌元素,年龄越小,越易缺乏。     

新型蒈酸基双酰肼化合物的合成及其生物活性

先将3-蒈烯分子中的碳碳双键氧化开环制得蒈酮酸，再将羰基还原成亚甲基得到蒈酸，酰氯化后与系列酰肼发生N-酰化反应合成了14个新型蒈酸基双酰肼化合物(5a～5n)，其结构经UV-Vis、¹H NMR、¹³C NMR、 FT-IR和MS(ESI)表征，并测试了目标化合物的抑菌和除草活性。结果显示：在用药量为50 μg·mL^-1时，目标化合物对花生褐斑病菌、小麦赤霉病菌、黄瓜枯萎病菌、苹果轮纹病菌、番茄早疫病菌、玉米小斑病菌、西瓜炭疽病菌以及水稻纹枯病菌等8种植物病原菌具有一定的抑制活性，其中化合物蒈酸基α-噻吩甲酰肼5f（R=α-thiophene）对苹果轮纹病菌的抑制率达85.0%，优于阳性对照百菌清。在用药量为100 μg·mL^-1时，化合物蒈酸基3′,4′-二甲氧基苯甲酰肼5j(R=3′,4′-OMe-Ph)、蒈酸基-m-甲氧基苯甲酰肼5d(R=m-OMe-Ph)、蒈酸基-m-甲基苯甲酰肼5b(R=m-Me-Ph)和蒈酸基苯甲酰肼5a(R=Ph)对油菜胚根生长的抑制率分别为88.5%、 86.1%、 85.1%和82.6%（均为A级活性水平），优于阳性对照丙炔氟草胺。     

溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

Synthesis and properties of coumarin-derived organogelators

A new family of coumarin derivatives containing amide group with different alkyl chain lengths was synthesized and their properties as organogelators were evaluated. It was found that the organogelation abilities were not obviously affected by the alkyl spacer length of amide group. Helical morphologies formed either in nonpolar or high polar solvents by most of the gelators. Occurrence of reversible and stereoselective photodimerization of the gel formed by 4-(7′-coumarinoxy)-N-octadecylbutanamide (3a) in cyclohexane was confirmed by ¹H NMR, UV absorption, and fluorescence spectra. The photoreaction of the gel proceeded without any dissolution, but the drastic microscopic changes of gel morphologies accompanied with the irradiation were identified using SEM and AFM investigations.     

新型咔唑基半胱氨酸双光子荧光探针的合成及光学性能

以咔唑为母体，设计并合成了一种可检测半胱氨酸的新型双光子荧光探针（3），其结构经¹H NMR, ¹³C NMR, HR-MS(ESI)和元素分析表征。采用UV-Vis和FL研究了3的光学性能。结果表明：半胱氨酸加量为0~50 eq.时，3的紫外最大吸收峰从365 nm蓝移至342 nm；在350 nm处出现一个等吸收点；在450 nm处的荧光强度增强约23倍。     

中孔分子筛SO42-/Zr-MCM-41催化裂解聚丙烯反应研究

采用水热合成法制备了不同硅锆比的中孔分子筛Zr-MCM-41,用强酸性基团SO42-对其进行修饰,制得SO42-/Zr-MCM-41中孔分子筛.采用XRD、FT-IR、NH3-TPD及氮气吸附脱附等技术对其结构和酸强度进行表征.通过改变硅锆比、负载不同的酸性基团对Zr-MCM-41的酸性进行调变,并将其用于催化聚丙烯(PP)的裂解反应,结果表明S i/Zr=40的SO42-/Zr-MCM-41具有较好的催化裂解活性.另外,与热裂解以及HZSM-5和Zr-MCM-41为催化剂时PP的裂解反应结果进行了比较,结果证明SO42-/Zr-MCM-41不仅具有较高的裂解转化率,而且具有较高的液体产物收率,适宜于空间位阻较大的PP的催化裂解反应.     

钴(Ⅱ)-5-取代邻菲罗啉-α-氨基酸三元配合物的稳定性研究

本文在25.0±0.1℃,I=0.1mol·dm^-3KNO₃存在下,采用pH法测得了5-取代邻菲罗啉的质子化常数以及钴(Ⅱ)与5-取代邻菲罗啉、α-氨基酸的二元、三元配合物的稳定常数。结果表明三元配合物的稳定性与5-取代邻菲罗啉的质子化常数、取代基常数均存在直线自由能关系。并用三元配合物稳定性的表征值logK_M、△logK,讨论了三元配合物的稳定性,发现钴(Ⅱ)与配体5-取代邻菲罗啉之间也存在着d-p反馈π键。该π健的强度对三元配合物稳定性有着显著影响。     

On the copolymerization of acrylates in the modified microemulsion process

Copolymerization of methyl methacrylate, methyl acrylate, butyl methacrylate, and butyl acrylate in turn was performed in the modified microemulsion polymerization process, i.e., continuous addition of monomer to a preemulsified system. It was found that the particle size of the copolymer microlatex did not change distinctly with the monomer composition. The estimation of emulsifier coverage on the microlatex particles indicated that the process switched from a traditional microemulsion to a normal seeded emulsion polymerization very soon after monomer dropping began. Therefore, a longer dropping time is needed to produce a microlatex with narrow dispersed particle size. Besides, in the modified microemulsion polymerization less emulsifier is needed to produce a stable microlatex. This behavior is related to the mechanism of normal seeded emulsion polymerization during monomer dropping.