Effect of hydration of polyamide membranes on the surface electrokinetic parameters: surface characterization by x-ray photoelectronic spectroscopy and atomic force microscopy

The surface and the solid/liquid interface of two polyamide membranes, one experimental (B0) and one commercial (NF45), have been characterized by X-ray photoelectronic spectroscopy (XPS), atomic force microscopy (AFM), and zeta potential, respectively. The surface roughness, determined by AFM data analysis, is different for the two membranes, and results show that the commercial NF45 membrane presents a much lower roughness than the experimental B0 membrane. XPS data indicate that the surface of membrane NF45 is similar to that of pure polyamide, while membrane B0 contains a considerable amount of impurities. The homogeneity in depth of both membranes was also studied by determining the composition profile at different analysis angles. Streaming potential along the membrane surface or tangential streaming potential (TSP) measurements with NaCl solutions at different concentrations were carried out with both membranes to determine the zeta potential and the electrokinetic surface charge density, and a correlation between membrane surface and interface parameters is made. Some differences in atomic concentrations of membrane surface elements and X-ray photoelectronic spectra of the samples used in TSP measurements and after a drying process at 90 degrees C for 24 h can be observed when they are compared with those for fresh membranes. Electrokinetic parameters for membrane NF45 (TSP, zeta potential, and surface electrokinetic charge density) obtained from three different series of measurements strongly decrease as a result of membrane use, but for membrane B0 they are practically independent of the number of measurements. This difference in the electrokinetic behavior of the two membranes has been related to the hydration process of the surface for each sample studied by XPS and AFM.     

Determination of carvedilol in human cardiac tissue by high-performance liquid chromatography

A new high-performance liquid chromatographic method has been developed for the determination of the beta-receptor blocker carvedilol in human cardiac tissue. After homogenizing tissue samples in a microdismembrator, carvedilol and the internal standard naftopidil are extracted with acetone. The extract is evaporated to dryness and reconstituted in a potassium acetate buffer of pH 3.5. Samples are cleaned up with solid-phase extraction columns. Carvedilol and the internal standard show recoveries of 69.8 +/- 12.2% and 63.9 +/- 9.34%, respectively. The linearity range for carvedilol is 0.01-0.35 ng/mg (parts per billion) tissue (wet weight), and the limit of quantitation is 0.01 ng/mg. The percentage coefficient of variation of the intra-assay varies between 1.45 and 5.38% and the interassay between 4.25 and 6.96%. To use as an application of the assay, the cardiac carvedilol tissue level in a patient on oral carvedilol therapy for congestive heart failure is reported.     

Trajectory studies of S(N)2 nucleophilic substitution. 8. Central barrier dynamics for gas phase Cl(-) + CH(3)Cl

Quasiclassical direct dynamics trajectories, calculated at the MP2/6-31G level of theory, are used to study the central barrier dynamics for the C1(-) + CH(3)Cl S(N)2 reaction. Extensive recrossings of the central barrier are observed in the trajectories. The dynamics of the Cl(-)-CH(3)Cl complex is non-RRKM and transition state theory (TST) is predicted to be an inaccurate model for calculating the Cl(-) + CH(3)Cl S(N)2 rate constant. Direct dynamics trajectories also show that Cl(-) + CH(3)Cl trajectories, which collide backside along the S(N)2 reaction path, do not form the Cl(-)-CH(3)Cl complex. This arises from weak coupling between the Cl(-)-CH(3)Cl intermolecular and CH(3)Cl intramolecular modes. The trajectory results are very similar to those of a previous trajectory study, based on a HF/6-31G* analytic potential energy function, which gives a less accurate representation of the central barrier region of the Cl(-) + CH(3)Cl reaction than does the MP2/6-31G* level of theory used here. Experiments are suggested for investigating the non-RRKM and non-TST dynamics predicted by the trajectories.     

Synthesis of enantiomerically enriched allenes by (-)-sparteine-mediated lithiation of alkynyl carbamates

[reaction: see text]. The alpha-deprotonation of alkynyl carbamates 3 with the chiral base (-)-sparteine (4)/n-butyllithium, transmetalation with ClTi(O(i)()Pr)3, and subsequent substitution with an aldehyde results in the formation of enantioenriched 4-hydroxyallenyl carbamates 11. Stereoselection is determined by dynamic resolution of the lithium/(-)-sparteine complexes by selective crystallization.     

Thermodynamic study of adsorption of homologous anionic and cationic surfactants

The simplified form of an integral adsorption isotherm based on Butler's equation was applied to describe surface behavior of a series of anionic (sodium alkylsulfonates) and cationic (alkylpyridinium halides) surfactants. This theory allows for the calculation of the free energy of adsorption (Delta G jk) value corresponding to the ability of a particular surfactant to undergo adsorption. The obtained results indicate that the value of Delta G jk depends linearly on the length of the hydrocarbon chain as well as on the kind and concentration of the added inorganic electrolyte. Moreover, it has been found that in the case of surfactants, which have the same length of the alkyl chain and adsorb from solutions containing the same inorganic electrolyte, the charge of hydrophilic group has insignificant influence on the value of Delta G jk.     

Interfacial micellar structures from novel amphiphilic star polymers

An amphiphilic heteroarm star polymer containing 12 alternating hydrophobic/hydrophilic arms of polystyrene (PS) and poly(acrylic acid) (PAA) connected to a well-defined rigid aromatic core was studied at the air-water and the air-solid interfaces. At the air-water interface, the molecules spontaneously form pancakelike micellar aggregates which measure up to several microns in diameter and 5 nm in thickness. Upon reduction of the surface area per molecule to 7 nm2, the two-dimensional micelles merged into a dense monolayer. We suggest that confined phase separation of dissimilar polymer arms occurred upon their segregation on the opposite sides of the rigid disklike aromatic core, forcing the rigid cores to adopt a face-on orientation with respect to the interface. Upon transfer onto solid supports the PS chains face the air-film interface making it completely hydrophobic, and the PAA chains were found to collapse and form a thin flattened underlayer. This study points toward new strategies to create large 2D microstructures with facial amphiphilicity and suggests a profound influence of star molecular architecture on the self-assembly of amphiphiles at the air-water interface.     

Fluoride-facilitated deuterium exchange from DMSO-d6 to polyamide-based cryptands

Multiple deuterium exchange between DMSO-d6 and amide hydrogens in two hexaamido cryptand fluoride receptors has been verified by 19F and 2H NMR and FAB mass spectral studies. Structural results for one of the complexes indicate a tricapped trigonal prism hydrogen bond coordination geometry around an encapsulated fluoride, with hydrogen bonds from fluoride to six amide and three phenyl hydrogens.     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.     

The complex of a bivalent derivative of galanthamine with torpedo acetylcholinesterase displays drastic deformation of the active-site gorge: implications for structure-based drug design

Bifunctional derivatives of the alkaloid galanthamine, designed to interact with both the active site of the enzyme acetylcholinesterase (AChE) and its peripheral cation binding site, have been assayed with Torpedo californica AChE (TcAChE), and the three-dimensional structures of their complexes with the enzyme have been solved by X-ray crystallography. Differences were noted between the IC(50) values obtained for TcAChE and those for Electrophorus electricus AChE. These differences are ascribed to sequence differences in one or two residues lining the active-site gorge of the enzyme. The binding of one of the inhibitors disrupts the native conformation of one wall of the gorge, formed by the loop Trp279-Phe290. It is proposed that flexibility of this loop may permit the binding of inhibitors such as galanthamine, which are too bulky to penetrate the narrow neck of the gorge formed by Tyr121 and Phe330 as seen in the crystal structure.     

Structural basis for discriminative regulation of gene expression by adenine- and guanine-sensing mRNAs

Metabolite-sensing mRNAs, or "riboswitches," specifically interact with small ligands and direct expression of the genes involved in their metabolism. Riboswitches contain sensing "aptamer" modules, capable of ligand-induced structural changes, and downstream regions, harboring expression-controlling elements. We report the crystal structures of the add A-riboswitch and xpt G-riboswitch aptamer modules that distinguish between bound adenine and guanine with exquisite specificity and modulate expression of two different sets of genes. The riboswitches form tuning fork-like architectures, in which the prongs are held in parallel through hairpin loop interactions, and the internal bubble zippers up to form the purine binding pocket. The bound purines are held by hydrogen bonding interactions involving conserved nucleotides along their entire periphery. Recognition specificity is associated with Watson-Crick pairing of the encapsulated adenine and guanine ligands with uridine and cytosine, respectively.