A combined theoretical and experimental study of efficient and fast titanocene-catalyzed 3-exo cyclizations

The mechanism of titanocene mediated 3-exo cyclizations was investigated by a combined theoretical and experimental study. A gradient corrected density functional theory (DFT) method has been scaled against titanocene dichloride, the parent butenyl radical, and in bond dissociation energy (BDE) calculations. The BP86 method using density fitting, and a basis set of triple-zeta quality emerged as a highly reliable tool for studying titanocene mediated radical reactions. The computational results revealed important kinetic and thermodynamic features of cyclopropane formation. Surprisingly, the beta-titanoxy radicals, the first intermediates of our investigations, were demonstrated to possess essentially the same thermodynamic stabilization as the corresponding alkyl radicals by comparison of the calculated BDEs. In contrast to suggestions for samarium mediated reactions, the cyclization was shown to be thermodynamically favorable in agreement with earlier kinetic studies. It was established that stereoselectivity of the cyclization is governed by the stability of the intermediates and thus the trans disubstituted products are formed preferentially. The observed ratios of products are in good to excellent agreement with the DFT results. By a combination of computational and experimental results, it was also shown that for the completion of the overall cyclopropane formation the efficiency of the trapping of the cyclopropylcarbinyl radicals is decisive.     

Investigation of the electrokinetic properties of paraffin suspension. 2. In cationic and anionic surfactant solutions

Electrical phenomena at nonionogenic hydrophobic surfaces (solid or liquid) in water, electrolyte, and/or surfactant solutions still attract research. In part 1 of this paper we described the electrokinetic behavior of paraffin wax suspension in water and electrolyte solutions (NaCl or LaCl3). On the basis of the latest data of water structure near hydrophobic surfaces it was concluded that immobilized water dipoles at the interface can play an essential role in the zeta potential formation. In this paper were investigated the zeta potentials of paraffin wax in cationic surfactants cetyltrimethylammonium bromide, C16H33(CH3)3NBr, and octadecyltrimethylammonium chloride, C18H37(CH3)3NCl, and anionic surfactant sodium dodecyl sulfate, C12H25SO4Na. Also changes in wettability of the paraffin surface due to the surfactant's adsorption were studied via wetting contact angle measurements and calculation of the surface free energy. It was concluded that at a low surfactant concentration (10(-6) M) the water dipole structure still contributes to the zeta potential, but at a higher one the zeta potential is determined by the surfactant molecules' adsorption. A special role of OH- ions is also clearly seen. Moreover, a functional relationship was found between the surface free energy of the surfactant-covered paraffin surface and the zeta potential.     

Synthesis of 1-Bromo-3-methoxy-4-propoxy-5-iodobenzene——A Novel Efficient Process for the Synthesis of Brominated Aromatic Compound

The reaction of aromatic carboxylic acid with oxalyl chloride gives rise to the corresponding acid chloride which without purification is treated with the sodium salt of mercaptopyridine oxide in the presence of 2,2-azo-bisisobutyronitrile (AIBN), radical initiator to give a brominated aromatic compound. After etherification and oxidation, 5-iodovaniline was converted to trisubstituted benzene carboxylic acid which give 1-bromo-3-methoxy-4-propoxy-5-iodobenzene by this new brominating process with a yield of 74%.     

Study on the interaction between nucleic acids and cationic surfactants

The interactions of nucleic acids and cationic surfactants (cetylpyridine bromide (CPB) and cetyltrimethylammonium bromide (CTMAB)) in aqueous solution have been studied using the techniques of resonance light scattering (RLS) spectroscopy, the absorption spectroscopy, zeta potential assay and NMR assignment measurement. It is considered that CPB or CTMAB can assemble on the surface of nucleic acid via electrostatic and hydrophobic forces, which results in the formation of large associate of nucleic acid-cationic surfactant and RLS enhancement of nucleic acid. Besides these forces, the pi-pi stacking force between CPB and nucleic acid also exists in the associate. In comparison with CTMAB, CPB has larger enhancement on RLS of nucleic acid, which is attributed to that the enhancement of the former is only due to the absorption of the bases of nucleic acid, while the enhancement of the latter is own to the synergetic resonance caused by the absorption of both bases of nucleic acid and the pyridyl in CPB. These results have important implication for understanding the influence of surfactants on nucleic acid functionality in life science.     

Oxybenziporphyrins, oxypyriporphyrins, benzocarbaporphyrins, and their 23-oxa and 23-thia analogues: synthesis, spectroscopic characterization, metalation, and structural characterization of a palladium(II) organometallic derivative

A series of nine porphyrin analogues have been synthesized using the "3 + 1" variant on the MacDonald condensation. Tripyrrane-type systems with a centrally unsubstituted pyrrole, furan, or thiophene ring were prepared using conventional methods, and these were condensed with indene-1,3-dicarbaldehyde, 5-formylsalicylaldehyde, or 3-hydroxy-2,6-pyridinedicarbaldehyde in the presence of TFA to generate benzocarba-, oxybenzi-, and oxypyriporphyrins, respectively. The furan-containing analogues proved to be highly basic and could only be isolated as the corresponding hydrochloride salts. All nine analogue systems showed porphyrin-like UV-vis spectra with one or two Soret absorptions near 400 nm and a series of weaker bands at longer wavelengths. These systems also showed large diatropic ring currents by proton NMR spectroscopy that were comparable to true porphyrins. In the presence of trace amounts of TFA, benzocarbaporphyrin 12 formed a monocation, and in 50% TFA a C-protonated dication was generated. The 23-oxacarbaporphyrin 14 gave a monocation in chloroform, although the free base was generated in 5% Et(3)N-chloroform. In 50% TFA-CHCl(3), 14 afforded a mixture of mono- and diprotonated species. Thiacarbaporphyrin 15 also formed a monocation in the presence of TFA, but C-protonation was relatively disfavored for this system. Nonetheless, in the presence of TFA-d, 12, 14, and 15 all showed rapid exchange of the internal NH and CH protons. Carbaporphyrin 12 also showed slow exchange at the meso-positions, but this process was not observed for its heteroanalogues 14 and 15. Protonation studies were also conducted for oxybenziporphyrins and oxypyriporphyrins 16-21. Oxacarbaporphyrin 14 was shown to be a superior organometallic ligand and afforded good yields of the related nickel(II) and palladium(II) derivatives under mild conditions. A low yield of the platinum(II) complex could also be isolated. All three complexes retained their aromatic character, although the Pd(II) derivative appeared to possess a slightly larger diatropic ring current. The palladium(II) complex 27 was further characterized by X-ray crystallography. The macrocyclic core was shown to be highly planar where the dihedral angles of the component pyrrole, furan and indene rings relative to the mean [18]annulene plane were all 相似文献   

A new route to achiral and chiral 1,2-bis(phosphino)ethanes, 1-arsino-2-phosphinoethanes, and 1,3-bis(phosphino)propanes and the molecular structure and catalytic activity of some rhodium(I) complexes derived thereof

A series of unsymmetrical 1,2-bis(phosphino)ethanes R(2)PCH(2)CH(2)PR'(2) and 1-arsino-2-phosphinoethanes R(2)AsCH(2)CH(2)PR'(2) mainly with bulky substituents R and R' were prepared from the cyclic sulfate by stepwise cleavage of the carbon-oxygen bonds by LiPR(2) and LiPR'(2) or LiAsR(2) and LiPR'(2), respectively. Analogously, racemic mixtures of R(2)PCH(2)CH(Me)PPh(2)(R =iPr, Cy ) as well as the enantiomers (R)-, (R)- and (R)-tBu(2)PCH(2)CH(Me)PPh(2)(R)- were obtained from the corresponding unsymmetrical cyclic sulfates and (S)-. On a similar route, the racemates of the 1,3-bis(phosphino)propanes R(2)PCH(2)CH(2)CH(Me)PPh(2)(R =iPr, tBu ), optically pure (R)- and (S,S)-iPr(2)PCH(Me)CH(2)CH(Me)PPh(2)(S,S)- were prepared. The reaction of [[RhCl([small eta](4)-C(8)H(12))](2)] with chelating ligands L-L, where L-L is R(2)PCH(2)P(men)(2)(R =iPr, Ph; men =(1S,2R,5S)-menthyl), Cy(2)AsCH(2)P(men)(2), or (R)-, (R)-, (R)-, (R)- and (S,S)-, in the presence of AgPF(6), gave the complexes [Rh(eta(4)-C(8)H(12))(L-L)]PF(6) which were used as pre-catalysts in the hydrogenation of the methyl ester of alpha-acetamidocinnamic acid (ACM). Depending on L-L, the solvent, the temperature and the pressure of H(2), optical yields of up to 69% ee were achieved. For two of the rhodium complexes, and, the molecular structures were determined by X-ray crystallography.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Rearrangement of 5-trimethylsilylthebaine on treatment with L-selectride: an efficient synthesis of (+)-bractazonine

Treatment of 5-trimethylsilylthebaine with L-Selectride gave rise to a rearrangement to 10-trimethylsilylbractazonine through migration of the phenyl group, whereas treatment of thebaine with strong Lewis acids is known to lead to a similar rearrangement through migration of the alkyl bridge to give, after reduction, (+)-neodihydrothebaine. It is suggested that the rearrangement of the alkyl group of thebaine is favored due to the formation of a tertiary benzylic cation. However, for 5-trimethylsilylthebaine, the lithium ion of L-Selectride acts as the Lewis acid and the beta-silyl effect dominates in the stabilization of any positive charge. This rearrangement provides a clear example of the greater relative migratory aptitude of phenyl groups over alkyl groups, and provides an efficient synthesis of (+)-bractazonine from thebaine.     

Regio- and enantioselective iridium-catalyzed intermolecular allylic etherification of achiral allylic carbonates with phenoxides

An enantioselective and regioselective iridium-catalyzed allylic etherification is described. The reaction of sodium and lithium aryloxides with achiral (E)-cinnamyl and terminal aliphatic allylic electrophiles in the presence of 2 mol % of an iridium-phosphoramidite complex provides chiral allylic aryl ethers in high yields and excellent levels of regio- and enantioselectivity. Lithium aryloxides containing a single substituent at an ortho, meta, or para position as well as sterically hindered phenoxides were tolerated. Reactions in THF displayed the most suitable balance of rate, regio-, and enantioselectivity. High ee's were also observed for the products from the reaction of alkyl (E)-allylic carbonates.     

Comparison of gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry for the determination of fatty and resin acids in paper mill process waters

A comparative study of the performance of liquid chromatography (LC)-atmospheric pressure chemical ionisation (APCI)-mass spectrometry (MS) and gas chromatography (GC)-mass spectrometry techniques for the determination of resin and fatty acids from paper mill process waters was carried out. These compounds are responsible for the high toxicity of paper mill effluents and little research has been carried out regarding their analysis using mass spectrometric techniques. To prove the usability of GC and LC-MS, 16 treated and untreated water samples of recycle, kraft and pulp paper mills were analysed and good agreement was observed as regards to compounds detected and corresponding concentrations. This paper also reports the limits of detection, recoveries, reproducibility, linearity and precision using the two methods. GC-MS presented better selectivity and lower detection limits (below 0.2 microg/l), but derivatization of the extracts and the short life of derivatives (12-24 h) made the technique tedious and prone to high variations. Although LC-APCI-MS presented coelution of the non-aromatic resin acids, it also showed good sensitivity (limits of detection <3 microg/l) and permitted the detection of resin and fatty acids at microg/l level. In addition, since samples could be directly injected to the chromatographic system, LC-APCI-MS was proven as a powerful technique for quick and unequivocal quality control during papermaking.