Real-time color holographic interferometry devoted to 2D unsteady wake flows

A new optical technique based on real time holographic interferometry in true colors has been implemented around the transonic wind tunnel of the ONERA-Lille center to analyze 2D unsteady wake flows. Tests realized in color interferometry, real time and double exposure, use simultaneously three wavelengths of a continuous waves laser (argon and krypton mixed) and holograms are recorded on silver-halide single-layer panchromatic Slavich PFG03c plates. The very principle of real-time true color holographic interferometry uses three primary wavelengths (red, green and blue) to record, under no-flow conditions, the interference among the three measurement beams and the three reference beams simultaneously on a single reference hologram. After the holographic plate is developed, it is placed on the test setup again in the position it occupied during exposure and the hologram is illuminated again by the three reference beams and three measurement beams. A flat, uniform color can then be observed behind the hologram. So a horizontal, vertical, or even circular fringe pattern can be formed and the achromatic central fringe can be made out very clearly. The single color is used to determine the path difference zero on the interferograms. The flow studied was the unsteady flow downstream of a cylinder placed crosswise in the test section. A sequence of hundred interferograms was recorded on the flow around the cylinder at Mach 0.37. The vortex formation and dissipation phases can be seen very clearly, along with the fringe beat to either side of the cylinder.     

The glow curve structure for the LiF:Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures

The glow curve structures for LiF:Mg,Cu,Na,Si TL detectors with various dopant concentrations and sintering temperatures were investigated for the improvement of the glow curve structure and sensitivity of the TL detector. The dopant concentrations were varied over the following ranges: Mg (0–0.25 mol%), Cu (0–0.07 mol%), Na and Si (0–1.5 mol%). With increasing Cu concentration, the intensity of the main peak was intensified and reached a maximum at a concentration of 0.05 mol%. The high-temperature peak was reduced. The dependency of the main peak intensity on the Mg concentration exhibits a sharp maximum at 0.2 mol%. The intensity of the high-temperature peak tends to rise slightly with increasing Mg concentration. It was found that the optimum concentrations of the dopants in the LiF:Mg,Cu,Na,Si TL material are Mg: 0.2 mol%, Cu: 0.05 mol%, Na and Si: 0.9 mol%. The dependency of the main peak intensity on sintering temperature exhibits a very sharp maximum at 830°C. The high-temperature peak was rapidly reduced after 825°C.     

Negative luminescence from mid-wave infrared HgCdTe diode arrays

A self-referencing, optical modulation technique was used to measure the negative luminescence efficiencies of an array of mid-wave infrared HgCdTe photodiodes with cutoff wavelength 4.6 μm as a function of sample temperature. The internal efficiency at a wavelength of 4 μm was 93% at 295 K, and nearly independent of temperature in the 240–300 K range. This corresponds to an apparent temperature reduction >50 K at room temperature and >30 K at 240 K. Moreover, the reverse-bias saturation current density was only 0.13 A/cm². The measured transmission and emission spectra were simulated using empirical HgCdTe absorption formulas from the literature.     

Polygonization in high-purity rolled (001)[110] tungsten single crystals

Electron microscopy is used to study changes in the dislocation structure of high-purity rolled (001)[110] tungsten single crystals during short-term high-temperature annealings. The effects of the annealing temperature and time on the formation of low-angle boundaries are investigated. Local defects, which are similar to those detected earlier upon annealing in the structure of molybdenum single-crystal ribbons, are found to form and dissociate upon annealing. These defects are concluded to have a dislocation nature.     

Distribution of a local magnetic field in superconductors with an uncorrelated random lattice of abrikosov vortices

The distribution of a local magnetic field near the surface of a uniaxial anisotropic type-II superconductor is determined in the framework of the London model in the case when the Abrikosov vortices are randomly distributed in the superconductor. The distribution of a local magnetic field is obtained as a function of the distance from the surface of the superconductor. It is demonstrated that the shape of the distribution of the local magnetic field near the surface differs substantially from that in the bulk of the superconductor. This difference should be taken into account in interpreting experimental data on the local magnetic field in the surface region of the superconductor and in thin superconducting films (with a thickness of less than or equal to λ, where λ is the depth of penetration of the magnetic field into the superconductor). It is shown that, as in the case of a regular lattice of vortices, the value of λ can be determined from observations of the distribution of the local magnetic field in type-II superconductors with an uncorrelated random lattice of vortices.     

Giant magnetoresistance of iron-chromium superlattices at microwaves

Interaction between an rf electromagnetic field and the Fe/Cr superlattice placed in a rectangular waveguide so that a high-frequency current passes in the plane of superlattice layers is considered. The transmission coefficient versus the magnetic field strength is found at centimeter waves, and a correlation between this dependence and the field dependence of the dc magnetoresistance is established. It is shown that a change in the transmission coefficient may greatly exceed the giant magnetoresistance of the superlattice. The frequency dependence of the microwave measurements has an oscillatory character. The oscillation frequencies are analyzed in terms of wavelet transformation. Two types of oscillation periods are found to exist, one of which corresponds to the resonance of waves traveling in the superlattice along the direction parallel to the narrow wall of the waveguide.     

Perpendicular magnetic anisotropy in single-crystal Co<Subscript>50</Subscript>Pt<Subscript>50</Subscript>/MgO(100) films

The crystal structure and hysteretic magnetic properties of equiatomic single-crystal CoPt films applied on MgO substrates by magnetron sputtering, as well as modification of these properties by thermal annealing, are studied. Heat-treated films of thickness in the range 2<d≤16 nm exhibit perpendicular magnetic anisotropy. A correlation between the crystalline anisotropy constant of the CoPt films and the order parameter of the LI₀ superstructure in these alloys is found. The effect of a single-crystalline MgO substrate on the structure and magnetic properties of equiatomic CoPt films is revealed.     

Longitudinal DC electric discharge in a supersonic air flow

A longitudinal dc electric discharge in a submerged high-pressure supersonic air jet is described. Photographs of the discharge are provided. The experimental voltage across the discharge gap and the discharge current are given for two resistances of the resistor that limits the discharge current over a certain range of the discharge channel length along the air flow. The current-voltage discharge characteristic is provided at a constant discharge length. The main discharge characteristics are obtained from a comparison of the experimental and theoretical results calculated on the basis of the simplest model.     

Effect of γ radiation from <Superscript>60</Superscript>Co on the formation of metal contacts to GaAs (Al<Subscript>x</Subscript>Ga<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>As) structures

The properties of nonrectifying AuGe/GaAs (Al_0.4Ga_0.6As) contacts exposed to heat treatment, ⁶⁰Co γ radiation, and γ radiation combined with the application of an electrical bias are studied. A correlation between the type of interfacial interaction in the contacts and their resistance is found. Results obtained are explained in terms of a diffusion model with a movable boundary of the metal layer.     

Modulation of the phase difference between polarization modes in single-mode fibers

Mechanisms of polarization modulation in a single-mode fiber that modulate the phase difference between polarization modes without affecting their amplitudes are considered. A coefficient that characterizes the efficiency of cylindrical piezoceramic modulators and is independent of their resonant properties is introduced. Analytical expressions for this coefficient for different modulation mechanisms are derived. The lateral pressure on the fiber is shown to provide the highest efficiency. For isotropic fibers, a modulator with a squeezing covering, which increases significantly its efficiency, is studied. For anisotropic fibers, the most appropriate way of phase difference modulation is longitudinal extension, in which case the birefringence axes do not have to be matched. In most cases, the measured and predicted efficiencies are in good correspondence.