Observing High‐Pressure Chemistry in Graphene Bubbles

Using IR spectroscopy, high‐pressure reactions of molecules were observed in liquids entrapped by graphene nanobubbles formed at the graphene–diamond interface. Nanobubbles formed on graphene as a result of thermally induced bonding of its edges with diamond are highly impermeable, thus providing a good sealing of solvents within. Owing to the optical transparency of graphene and diamond, high‐pressure chemical reactions within the bubbles can be probed with vibrational spectroscopy. By monitoring the conformational changes of pressure‐sensitive molecules, the pressure within the nanobubble can be calibrated as a function of temperature and it is about 1 GPa at 600 K. The polymerization of buckministerfullerene (C₆₀), which is symmetrically forbidden under ambient conditions, is observed to proceed in well‐defined stages in the pressurized nanobubbles.     

Phenothiazine–BODIPY–Fullerene Triads as Photosynthetic Reaction Center Models: Substitution and Solvent Polarity Effects on Photoinduced Charge Separation and Recombination

Novel photosynthetic reaction center model compounds of the type donor₂–donor₁–acceptor, composed of phenothiazine, BF₂‐chelated dipyrromethene (BODIPY), and fullerene, respectively, have been newly synthesized using multistep synthetic methods. X‐ray structures of three of the phenothiazine‐BODIPY intermediate compounds have been solved to visualize the substitution effect caused by the phenothiazine on the BODIPY macrocycle. Optical absorption and emission, computational, and differential pulse voltammetry studies were systematically performed to establish the molecular integrity of the triads. The N‐substituted phenothiazine was found to be easier to oxidize by 60 mV compared to the C‐substituted analogue. The geometry and electronic structures were obtained by B3LYP/6‐31G(dp) calculations (for H, B, N, and O) and B3LYP/6‐31G(df) calculations (for S) in vacuum, followed by a single‐point calculation in benzonitrile utilizing the polarizable continuum model (PCM). The HOMO?1, HOMO, and LUMO were, respectively, on the BODIPY, phenothiazine and fullerene entities, which agreed well with the site of electron transfer determined from electrochemical studies. The energy‐level diagram deduced from these data helped in elucidating the mechanistic details of the photochemical events. Excitation of BODIPY resulted in ultrafast electron transfer to produce PTZ–BODIPY^.+–C₆₀^.?; subsequent hole shift resulted in PTZ^.+–BODIPY–C₆₀^.? charge‐separated species. The return of the charge‐separated species was found to be solvent dependent. In nonpolar solvents the PTZ^.+–BODIPY–C₆₀^.? species populated the ³C₆₀* prior to returning to the ground state, while in polar solvent no such process was observed due to relative positioning of the energy levels. The ¹BODIPY* generated radical ion‐pair in these triads persisted for few nanoseconds due to electron transfer/hole‐shift mechanism.     

Cross‐Conjugated Hexaphyrins and Their Bis‐Rhodium Complexes

A cross‐conjugated hexaphyrin that carries two meso‐oxacyclohexadienylidenyl (OCH) groups 9 was synthesized from the condensation of 5,10‐bis(pentafluorophenyl)tripyrrane with 3,5‐di‐tert‐butyl‐4‐hydroxybenzaldehyde. The reduction of 9 with NaBH₄ afforded the Möbius aromatic [28]hexaphyrin 10 . Bis‐rhodium complex 11 , prepared from the reaction of 10 with [{RhCl(CO)₂}₂], displays strong Hückel antiaromatic character because of the 28 π electrons that occupy the conjugated circuit on the enforced planar structure. The oxidation of 11 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) yielded complexes 12 and 13 depending upon the reaction conditions. Both 12 and 13 are planar owing to bis‐rhodium metalation. Although complex 12 bears two meso‐OCH groups at the long sides and is quinonoidal and nonaromatic in nature, complex 13 bears 3,5‐di‐tert‐butyl‐4‐hydroxyphenyl and OCH groups and exhibits a moderate diatropic ring current despite its cross‐conjugated electronic circuit. The diatropic ring current increases upon increasing the solvent polarity, most likely due to an increased contribution of an aromatic zwitterionic resonance hybrid.     

PdII Complexes of [44]‐ and [46]Decaphyrins: The Largest Hückel Aromatic and Antiaromatic,and Möbius Aromatic Macrocycles

Reductive metalation of [44]decaphyrin with [Pd₂(dba)₃] provided a Hückel aromatic [46]decaphyrin Pd^II complex, which was readily oxidized upon treatment with DDQ to produce a Hückel antiaromatic [44]decaphyrin Pd^II complex. In CH₂Cl₂ solution the latter complex underwent slow tautomerization to a Möbius aromatic [44]decaphyrin Pd^II complex which exists as a mixture of conformers in dynamic equilibrium. To the best of our knowledge, these three Pd^II complexes represent the largest Hückel aromatic, Hückel antiaromatic, and Möbius aromatic complexes to date.     

Band‐Gap Manipulations of Monolayer Graphene by Phenyl Radical Adsorptions: A Density Functional Theory Study

Phenyl radical (Ph^.) adsorption on monolayer graphene sheets is used to investigate the band‐gap manipulation of graphene through density functional theory. Adsorption of a single Ph^. on graphene breaks the aromatic π‐bond and generates an unpaired electron, which is delocalized to the ortho or para position. Adsorption of a second radical at the ortho or para position saturates the radical by electron pairing and results in semiconducting graphene. Adsorption of a second radical at the ortho position (ortho–ortho pairing) is found to be more favorable than adsorption at the para position (ortho–para pairing), and the ortho–ortho pairing has stronger effects on band‐gap opening compared with ortho–para pairing. Adsorption of even numbers of Ph^. on graphene by ortho–ortho and ortho–para pairings, in general, increases the band gap. Our study shows promise of band‐gap manipulation in monolayer graphene by Ph^. adsorption, leading to potential wider applications of graphene.     

Blind prediction of HIV integrase binding from the SAMPL4 challenge

Here, we give an overview of the protein-ligand binding portion of the Statistical Assessment of Modeling of Proteins and Ligands 4 (SAMPL4) challenge, which focused on predicting binding of HIV integrase inhibitors in the catalytic core domain. The challenge encompassed three components—a small “virtual screening” challenge, a binding mode prediction component, and a small affinity prediction component. Here, we give summary results and statistics concerning the performance of all submissions at each of these challenges. Virtual screening was particularly challenging here in part because, in contrast to more typical virtual screening test sets, the inactive compounds were tested because they were thought to be likely binders, so only the very top predictions performed significantly better than random. Pose prediction was also quite challenging, in part because inhibitors in the set bind to three different sites, so even identifying the correct binding site was challenging. Still, the best methods managed low root mean squared deviation predictions in many cases. Here, we give an overview of results, highlight some features of methods which worked particularly well, and refer the interested reader to papers in this issue which describe specific submissions for additional details.     

Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G

Conducting polymers are excellent sensing materials in the design of bioanalytical sensors because of their electronic conductivity, low energy optical transitions, biocompatibility, and room temperature operation. Among them, Polypyrrole (Ppy) is one of the most extensively used conducting polymers because of a number of properties such as redox activity, rapid electron transfer, and ability to link a variety of biomolecules to pyrrole groups by chemical treatment. In this study, Ppy nanowires were synthesized by an electrospinning method. The nanowires were prepared from a solution mixture of Ppy and poly(ethylene oxide). The method of detection in such a device is based on the selective binding of antigen onto an antibody that is covalently attached to the nanowires. Thus, anti-IgG was immobilized on Ppy nanowires using an EDC {[N-(3-dimethyl aminopropyl)-N₂-ethylcarbodiimide hydrochloride]}-NHS(N-hydrosuccinimide) modified technique. Fluorescence images of BSA–FITC (fluorescein isothiocyanate labeling of bovine serum albumin) conjugation demonstrated that antibody was functionalized on the Ppy nanowires without non-specific binding and facilitated selective detection of antigen. Current–voltage (I–V) characterization was used to monitor the change in the conductivity of nanowires while the specific binding interaction occurred. These results of electrical properties enable Ppy nanowire-based biosensors to detect biomolecules in real-time.     

Large-Scale Synthesis of MOF-Derived Superporous Carbon Aerogels with Extraordinary Adsorption Capacity for Organic Solvents

Carbon aerogels (CAs) with 3D interconnected networks hold promise for application in areas such as pollutant treatment, energy storage, and electrocatalysis. In spite of this, it remains challenging to synthesize high-performance CAs on a large scale in a simple and sustainable manner. We report an eco-friendly method for the scalable synthesis of ultralight and superporous CAs by using cheap and widely available agarose (AG) biomass as the carbon precursor. Zeolitic imidazolate framework-8 (ZIF-8) with high porosity is introduced into the AG aerogels to increase the specific surface area and enable heteroatom doping. After pyrolysis under inert atmosphere, the ZIF-8/AG-derived nitrogen-doped CAs show a highly interconnected porous mazelike structure with a low density of 24 mg cm⁻³, a high specific surface area of 516 m² g⁻¹, and a large pore volume of 0.58 cm⁻³ g⁻¹. The resulting CAs exhibit significant potential for application in the adsorption of organic pollutants.     

Nanocatalosomes as Plasmonic Bilayer Shells with Interlayer Catalytic Nanospaces for Solar‐Light‐Induced Reactions

Interest and challenges remain in designing and synthesizing catalysts with nature‐like complexity at few‐nm scale to harness unprecedented functionalities by using sustainable solar light. We introduce “nanocatalosomes”—a bio‐inspired bilayer‐vesicular design of nanoreactor with metallic bilayer shell‐in‐shell structure, having numerous controllable confined cavities within few‐nm interlayer space, customizable with different noble metals. The intershell‐confined plasmonically coupled hot‐nanospaces within the few‐nm cavities play a pivotal role in harnessing catalytic effects for various organic transformations, as demonstrated by “acceptorless dehydrogenation”, “Suzuki–Miyaura cross‐coupling” and “alkynyl annulation” affording clean conversions and turnover frequencies (TOFs) at least one order of magnitude higher than state‐of‐the‐art Au‐nanorod‐based plasmonic catalysts. This work paves the way towards next‐generation nanoreactors for chemical transformations with solar energy.     

Large‐Scale Synthesis of MOF‐Derived Superporous Carbon Aerogels with Extraordinary Adsorption Capacity for Organic Solvents

Carbon aerogels (CAs) with 3D interconnected networks hold promise for application in areas such as pollutant treatment, energy storage, and electrocatalysis. In spite of this, it remains challenging to synthesize high‐performance CAs on a large scale in a simple and sustainable manner. We report an eco‐friendly method for the scalable synthesis of ultralight and superporous CAs by using cheap and widely available agarose (AG) biomass as the carbon precursor. Zeolitic imidazolate framework‐8 (ZIF‐8) with high porosity is introduced into the AG aerogels to increase the specific surface area and enable heteroatom doping. After pyrolysis under inert atmosphere, the ZIF‐8/AG‐derived nitrogen‐doped CAs show a highly interconnected porous mazelike structure with a low density of 24 mg cm^?3, a high specific surface area of 516 m² g^?1, and a large pore volume of 0.58 cm^?3 g^?1. The resulting CAs exhibit significant potential for application in the adsorption of organic pollutants.