Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

The effect of a cystamine derivative, bis[2-(E-2-hexenoylamino)ethyl] disulfide, on rat platelet aggregation

Bis[2-(E-2-alkenoylamino)ethyl] disulfides (compds. I), synthesized from cystamine and 2-trans fatty acids, inhibited collagen-induced rat and rabbit platelet aggregation. The most potent compound was bis[2-(E-2-hexenoylamino)ethyl] disulfide (compd. I-1), and this compound suppressed thromboxane B2 formation from arachidonic acid in rat platelets. The results suggested that compd. I-1 has an inhibitory effect on cyclooxygenase.     

Styrene polymerization in ternary microemulsions: effects of water-soluble and oil-soluble initiators

The polymerization of styrene in ternary microemulsions stabilized by the cationic surfactant tetradecyltrimethylammonium bromide was studied as a function of concentrations of water-soluble (potassium persulfate, KPS) and oil-soluble (AIBN) initiators. At a particular molar ratio of the initiators, similar maximum rates of polymerization can be achieved from using both types of the initiators. In addition, both initiated systems produced microlatexes with similar hydrodynamic radius, number of polymer particles, molecular weight of polystyrene and number of polymer chain per latex particle. But the dependencies of these latex parameters on concentrations of KPS and AIBN may not be the same. The polymerization mechanism appears to be similar, irrespective of using KPS or AIBN. It is discussed in terms of effective radicals produced for the polymerization. While the different dependencies of some latex parameters on concentrations of the initiators are attributed to the different efficiencies of the initiators in producing effective radicals.     

Efficient chemoselective deprotection of silyl ethers using catalytic 1-chloroethyl chloroformate in methanol

Fast and chemoselective desilylation of silyl-protected alcohols was achieved using a catalytic amount of 1-chloroethyl chloroformate in methanol. With a minimal amount of 1-chloroethyl chloroformate as the source for anhydrous HCl, extremely efficient cleavage of silyl ethers of primary and secondary alcohols was accomplished, and chemoselective deprotection of one silyl ether in the presence of another silyl or other acid-labile group was possible through controlling the amount of the chloroformate and reaction time.     

Interpretation of contact angle measurements on two different fluoropolymers for the determination of solid surface tension

Contact angle measurements with a large number of liquids on the semi-fluorinated acryl polymer EGC-1700 films are reported. The surface tension was determined to be gammasv=13.84 mJ/m2 from contact angles of octamethylcyclotetrasiloxane (OMCTS) and decamethylcyclopentasiloxane (DMCPS). Inertness of these two liquids makes them ideal for determination of surface tension of low-energy fluoropolymers. On the other hand, contact angles of many other liquids deviated somewhat from a smooth contact angle pattern that represents the EGC-1700 surface tension. It is argued that noninertness of the molecules of these liquids gives rise to specific interactions with the polymer film, causing the deviations. Furthermore, contact angles of a series of n-alkanes (n-hexane to n-hexadecane) showed systematic deviations from this curve, similar to the trend observed for n-alkanes/Teflon AF 1600 systems studied earlier. Adsorption of vapor of short-chain liquids onto the polymer film caused their contact angles to fall above the gammasv=13.84 mJ/m2 curve, and a parallel alignment of molecules of the long-chain n-alkanes in the vicinity of the solid was the explanation for the deviation of their contact angles below it. It is found that vapor adsorption effect is more significant in the case of Teflon AF 1600, while the alignment of liquid molecules close to the surface is more pronounced for EGC-1700.     

A novel synthetic route to 2-halo-3,4-dicyanopyridines

2-Bromo-3,4-dicyanopyridine 2 was obtained in moderate yield by reacting 1,1,2,2-tetracyano-3-trimethylsiloxycyclobutane 1 with phosphorus tribromide. Similarly, reaction of 1 with chlorinating reagents such as thionyl chloride and oxalyl chloride led to the corresponding 2-chloro-3,4-dicyanopyridine 3 in 40% yield. A reaction mechanism is suggested.     

Highly enantioselective synthesis of alpha-alkyl-alanines via the catalytic phase-transfer alkylation of 2-naphthyl aldimine tert-butyl ester by using O(9)-allyl-N(1)-2',3',4'-trifluorobenzylhydrocinchonidinium bromide

Systematic investigations to develop an efficient enantioselective synthetic method for alpha-alkyl-alanine by catalytic phase-transfer alkylation were performed. The alkylation of 2-naphthyl aldimine tert-butyl ester, 1E, with RbOH and O(9)-allyl-N-2',3',4'-trifluorobenzylhydrocinchonidinium bromide, 6, at -35 degrees C showed the highest enantioselectivities, up to 96% ee.     

Chromatographic characteristics of cholesterol-imprinted polymers prepared by covalent and non-covalent imprinting methods

Cholesterol-imprinted polymers were prepared in bulk polymerization by the methods of covalent and non-covalent imprinting. The former involved the use of a template-containing monomer, cholesteryl (4-vinyl)phenyl carbonate, while the latter used the complexes of template and functional monomer, methacrylic acid or 4-vinylpyridine prior to polymerization. Columns packed with these molecularly imprinted polymers (MIPs) were all able to separate cholesterol from other steroids. For different combinations of cholesterol and beta-estradiol concentrations in a total of 1 g/l, the peak retention times for both compounds were nearly constant. The adsorption capacity for cholesterol onto the MIPs was found to significantly depend on the use of functional monomers, but the selectivity factors were only slightly different from each other at 2.9 to 3.2 since the separation was all based on the specific binding of cholesterol to recognition sites formed on the imprinted polymers. The capacity factors for cholesterol were determined to be 3.5, 4.0 and 3.1, respectively, for covalently imprinted, 4-vinylpyridine-based, and methacrylic acid-based non-covalently imprinted polymers. However, the covalently imprinted polymer was found to have a higher adsorption capacity for cholesterol and about fivefold higher chromatographic efficiency for cholesterol separation, in comparison with non-covalently imprinted polymers. The use of covalent imprinting significantly reduced the peak broadening and tailing. This advantage along with constant retention suggests that the covalently imprinted polymer has potential for quantitative analysis.     

Ruthenium‐catalyzed formal alkyl group transfer: Synthesis of quinolines from nitroarenes and alkylammonium halides

Nitroarenes are reductively cyclized with an array of tetraalkylammonium halides and trialkylarnmonium chlorides in the presence of a catalytic amount of a ruthenium catalyst along with tin(II) chloride dihydrate at 180° to afford the corresponding quinolines in moderate to good yields. The addition of tin(II) chloride dihydrate is necessary for the effective formation of quinolines and toluene is the solvent of choice. A reaction pathway involving initial reduction of nitroarenes to anilines and conversion of alkylammonium halides to alkylamines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heteroannulation is proposed for this catalytic process.