Structural, spectroscopic and photoluminescence studies of LiEu(WO4)2−x(MoO4)x as a near-UV convertible phosphor

A series of lithium europium double tungsto-molybdate phosphors LiEu(WO₄)_2−x(MoO₄)_x (x=0, 0.4, 0.8, 1.2, 1.6, 2.0) have been synthesized by solid-state reactions and their crystal structure, optical and luminescent properties were studied. As the molybdate content increases, the intensity of the ⁵D₀→⁷F₂ emission of Eu³⁺ activated at wavelength of 396 nm was found to increase and reach a maximum when the relative ratio of Mo/W is 2:0. These changes were found to be accompanied with the changes in the spectral feature, which can be attributed to the crystal field splitting of the ⁵D₀→⁷F₂ transition. As the molybdate content increases the emission intensity of the 615 nm peak also increases. The intense red-emission of the tungstomolybdate phosphors under near-UV excitation suggests them to be potential candidate for white light generation by using near-UV LEDs. In this study the effect of chemical compositions and crystal structure on the photoluminescent properties of LiEu(WO₄)_2−x(MoO₄)_x is investigated and discussed.     

Fe-catalyzed three-component dicarbofunctionalization of unactivated alkenes with alkyl halides and Grignard reagents

A highly chemoselective iron-catalyzed three-component dicarbofunctionalization of unactivated olefins with alkyl halides (iodides and bromides) and sp²-hybridized Grignard reagents is reported. The reaction operates under fast turnover frequency and tolerates a diverse range of sp²-hybridized nucleophiles (electron-rich and electron-deficient (hetero)aryl and alkenyl Grignard reagents), alkyl halides (tertiary alkyl iodides/bromides and perfluorinated bromides), and unactivated olefins bearing diverse functional groups including tethered alkenes, ethers, protected alcohols, aldehydes, and amines to yield the desired 1,2-alkylarylated products with high regiocontrol. Further, we demonstrate that this protocol is amenable for the synthesis of new (hetero)carbocycles including tetrahydrofurans and pyrrolidines via a three-component radical cascade cyclization/arylation that forges three new C–C bonds.

A highly selective iron-catalyzed three-component dicarbofunctionalization of unactivated alkenes with alkyl halides and sp²-hybridized Grignard reagents is reported.     

Relative binding affinities of alkali metal cations to

The binding affinity and selectivity of a new ionophore, [1(8)]starand (1), toward alkali metal cations in methanol were examined through NMR titration experiments and free energy perturbation (FEP) and molecular dynamics simulations. The preference was determined to be K(+) > Rb(+) > Cs(+) > Na(+) > Li(+) in both FEP simulations and NMR experiments. The FEP simulation results were able to predict the relative binding free energies with errors less than 0.13 kcal/mol, except for the case between Li(+) and Na(+). The cation selectivity was rationalized by analyzing the radial distribution functions of the M-O and M-C distances of free metal cations in methanol and those of metal-ionophore complexes in methanol.     

Unsymmetrical linear pentanuclear nickel string complexes: [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3))

The one-electron oxidized linear pentanuclear nickel complexes [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) (1) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3)) (2) have been synthesized by reacting the neutral compound [Ni(5)(tpda)(4)Cl(2)] with the corresponding silver salts. These compounds have been characterized by various spectroscopic techniques. Compound 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.3022(1) A, b = 31.0705(3) A, c = 15.8109(2) A, beta = 92.2425(4) degrees, V = 7511.49(13) A(3), Z = 4, and compound 2 crystallizes in the monoclinic space group C2/c with a = 42.1894(7) A, b = 17.0770(3) A, c = 21.2117(4) A, beta = 102.5688(8) degrees, V = 14916.1(5) A(3), Z = 8. X-ray structural studies reveal an unsymmetrical Ni(5) unit for both compounds 1 and 2. Compounds 1 and 2 show stronger Ni-Ni interactions as compared to those of the neutral compounds.     

Self-directed growth of benzonitrile line on H-terminated Si(001) surface

Using first-principles density-functional calculations we predict a self-directed growth of benzonitrile molecular line on a H-terminated Si(001) surface. The C[triple bond]N bond of benzonitrile reacts with a single Si dangling bond which can be generated by the removal of a H atom, forming one Si-N bond and one C radical. Subsequently, the produced C radical can be stabilized by abstracting a H atom from a neighboring Si dimer, creating another H-empty site. This H-abstraction process whose activation barrier is 0.65 eV sets off a chain reaction to grow one-dimensional benzonitrile line along the Si dimer row. Our calculated energy profile for formation of the benzonitrile line shows its relatively easier formation compared with previously reported styrene and vinylferrocene lines.     

Rapid high-performance isoelectric focusing of monoclonal antibodies in uncoated fused-silica capillaries

Rapid (<5 min) high-performance isoelectric focusing was performed in uncoated fused-silica capillaries to resolve isoforms of monoclonal antibodies and to determine their isoelectric points (pI). The methodology involved the use of a 32 cm (effective length 9 cm)×50 μm I.D. uncoated capillary. (Hydroxypropyl)methyl cellulose was used as an additive to suppress analyte–wall interaction and to precisely control electroosmotic flow so that focusing and mobilization of focused zones past detector occur simultaneously. Urea was included in the separation medium to solubilize the antibodies that precipitated at their point of focusing. The methods with and without urea used ampholytes pH 5–8 to generate a demonstrable linear gradient between pH 5.4 and pH 7.2, based on the separation of various protein standards. Reproducibility [<2% (R.S.D.)] of the migration times (corresponding to the detectable isoforms of the antibodies) was obtained by using two sets of reagents and capillaries on three consecutive days. pI values determined from day-to-day with a reference standard were shown to vary by only 0.01 pH unit. The described capillary isoelectric focusing methods provided a rapid, simple and reproducible way of monitoring micro-heterogeneity and pI of the murine monoclonal antibodies investigated.     

Trapping H- bound to the nitrogenase FeMo-cofactor active site during H2 evolution: characterization by ENDOR spectroscopy

We here show that the iron-molybdenum (FeMo)-cofactor of the nitrogenase alpha-70(Ile) molybdenum-iron (MoFe) protein variant accumulates a novel S = (1)/(2) state that can be trapped during the reduction of protons to H(2). (1,2)H-ENDOR measurements disclose the presence of two protons/hydrides (H(+/)(-)) whose hyperfine tensors have been determined from two-dimensional field-frequency (1)H ENDOR plots. The two H(+/)(-) have large isotropic hyperfine couplings, A(iso)( )() approximately 23 MHz, which shows they are bound to the cofactor. The favored analysis for these plots indicates that the two H(+/)(-) have the same principal values, which indicates that they are chemically equivalent. The tensors are further related to each other by a permutation of the tensor components, which indicates an underlying symmetry of binding relative to the cofactor. At present, no model for the structure of the iron-molybdenum (FeMo)-cofactor in the S = (1)/(2) state trapped during the reduction of H(+) can be shown unequivocally to satisfy all of the constraints generated by the ENDOR analysis. The data disfavors any model that involves protonation of sulfides, and thus suggests that the intermediate instead contains two chemically equivalent bound hydrides; it appears unlikely that these are terminal monohydrides.     

Self-assembly of rectangles and prisms via a molecular "clip"

Aromatic molecular "clips" bearing two symmetrically bound platinum moieties have been prepared. The molecular "clip" 4 readily self-assembled with linear linkers such as 4,4'-bipyridyl, 1,4-bis[2-(4-isocyano-3,5-diisopropylphenyl)ethynyl]benzene, and nicotinic acid to form molecular rectangles. The overall dimensions of the rectangle 7 were 7.3 Angstroms x 15.3 Angstroms. The molecular "clip" also self-assembled with tritopic pyridyl and isocyanide ligands to form trigonal prismatic frameworks. The characterization of the supramolecules by multinuclear NMR, electrospray mass spectrometry, and X-ray crystal structures is also reported.     

Tertiary contact formation in alpha-synuclein probed by electron transfer

To explore tertiary contact formation in alpha-synuclein, a natively unfolded protein implicated in Parkinson's disease, we have measured the rates of reaction between a powerful electron donor, the tryptophan (W) triplet excited state, and an acceptor, 3-nitro-tyrosine (Y(NO2)) in six different variants, probing loop sizes between 15 and 132 residues. Electron transfer rates decrease with loop size with the fastest contact time of 140 ns for the N-terminal pair and the slowest of 1.2 mus for the N- to C-terminal pair. Diffusion coefficients ranging from approximately 2 x 10-6 to approximately 10-5 cm2 s-1 were extracted from simultaneous fits of the W to Y(NO2) electron (triplet excited state) and energy transfer (singlet excited state) kinetics.     

Polymeric positive-temperature-coefficient materials: dynamic curing effect

The object of this work was to prepare high-density polyethylene (HDPE)/ethylene–propylene–diene terpolymer (EPDM)/conductive carbon black (CB) composites by dynamic curing and to characterize the positive-temperature-coefficient (PTC) performances of the composites.EPDM and dicumyl peroxide were preblended in a research mill. The roll-milled strands were blended with HDPE and CB in a Haake mixer. The sheet resistivity and morphology of the HDPE/EPDM/CB composites with or without the dynamic curing process were investigated. It was concluded that the dynamically cured blends exhibit better PTC performance than the simple blends without dynamic curing. The effects of shear intensity and dicumyl peroxide content during the dynamic curing process were discussed for the PTC characteristics of the HDPE/EPDM/CB composites.