An electrochemically controllable nanomechanical molecular system utilizing edge-to-face and face-to-face aromatic interactions

[formula: see text] A new molecular system, 2,11-dithio[4,4]metametaquinocyclophane containing a quinone moiety, was designed and synthesized. As the quinone moiety can readily be converted into an aromatic pi-system (hydroquinone) upon reduction, the nanomechanical molecular cyclophane system exhibits a large flapping motion like a molecular flipper from the electrochemical redox process. The conformational changes upon reduction and oxidation are caused by changes of nonbonding interaction forces (devoid of bond formation/breaking) from the edge-to-face to face-to-face aromatic interactions and vice versa, respectively.     

Selective transport of cesium ion in polymeric CTA membrane containing calixcrown ethers

A series of calixcrown ethers for which the cavity size of the crown ring is varied from crown-6 to crown-7 to crown-8 were examined for the transport abilities toward alkali metal ions. These ligands were incorporated into supported liquid membranes (SLMs) and into polymer inclusion membranes (PIMs) composed of cellulose triacetate (CTA) as a support and 2-nitrophenyl octyl ether (NPOE) and tris(2-butoxyethyl) phosphate (TBEP) as a plasticizer. In both membrane systems, calixcrown-6 showed the best selectivity toward a cesium ion over other alkali metal ions. The polymeric CTA membrane showed more rapid transport rate as well as higher durability than did the SLMs.     

Large-volume stacking in capillary electrophoresis using pH hysteresis of the electroosmotic flow in a bare fused-silica capillary

For large-volume stacking with the electroosmotic flow pump (LVSEP) in capillary electrophoresis of anionic analytes it is required that the electroosmotic mobility (EOM) should be smaller than the magnitudes of the effective mobilities of the analytes. When a fused-silica capillary is treated with an acidic solution, the silanoate group on the silica surface is neutralized to silanol and the EOM is suppressed. Due to the slow deprotonation equilibrium of the silanol group at an intermediate pH, this reduced EOM can be retained during a number of electrophoresis runs. Using a bare fused-silica capillary preconditioned with 0.01 M HCl, successful LVSEP at pH 6.0 was achieved for weakly acidic compounds with two orders of magnitude enhancements in the concentration sensitivity. The repeatability in migration times of ten analytes stacked by LVSEP in a single day was excellent with the relative standard deviation (RSD) less than 1% (n = 6). The day-to-day repeatability was also excellent with RSD less than 3% (n = 3 x 6) when the capillary was preconditioned each day.     

Structural determination of hexadecanoic lysophosphatidylcholine regioisomers by fast atom bombardment tandem mass spectrometry

The structural determination of sn-1 and sn-2 hexadecanoic lysophosphatidylcholine (LPC) regioisomers was carried out using fast atom bombardment tandem mass spectrometry (FAB-MS/MS). The collision-induced dissociation (CID) of protonated and sodiated molecules produced diverse product ions due mainly to charge remote fragmentations. Based on the information obtained from the CID spectra of protonated and sodiated molecules, sn-1 and sn-2 hexadecanoic LPC isomers could be discriminated. Especially, the abundance ratio of the diagnostic ion pair [m/z 224/226] in the CID spectra of [M + H](+) ions was shown to be greatly different. Moreover, the CID-MS/MS spectra of sodium-adducted molecules for hexadecanoic LPC isomers showed characteristic product ions such as [M + Na - 103](+), [M + Na - 85](+), and [M + Na - 59](+), by which their regio-specificity can be differentiated.     

An evaluation of exogenous application of protoporphyrin IX and its dimethyl ester as a photodynamic diagnostic agent in poorly differentiated human nasopharyngeal carcinoma

5-Aminolevulinic acid and its esterified analogues have been under much investigation to enhance the endogenous production of protoporphyrin IX (PpIX) in tumor cells. However, in this work, we studied the in vitro and in vivo efficacy of exogenously administered PpIX and its esterified analogue, PpIX dimethyl ester (PME), in poorly differentiated human nasopharyngeal carcinoma (NPC/CNE-2) as a photodynamic diagnostic (PDD) agent. NPC/CNE-2 at its earliest time, 1 h after incubation with PME in in vitro studies, has exhibited 64% (P <0.01) higher tumor to normal cell (T/N) fluorescence ratio than with PpIX. In an in vivo mouse xenograft model, comparable photosensitizer concentration in tumor after intravenous administration was observed at 1-3 h time points, but at 9 h, PME had 31% (P=0.05) greater concentration in tumor compared with PpIX. In addition, by constituting PME and PpIX in different topical gel composites, of which, PME gel composition of 8:2 Plasdone and Gantrez resulted in the highest T/N ratio at 6 h after application (34%; P <0.05) in comparison with other gel composites. Evaluation of PME and PpIX constituted in the delivery vehicles investigated showed comparable selectivity for tumor at 1-3 h, thus neither photosensitizer is more efficient than the other for PDD at the early time points; however, beyond 6 h, PME had higher selectivity for tumor compared with PpIX. Thus, further investigation is warranted to improve the drug delivery vehicle for greater tumor selectivity at a shorter incubation time.     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

Structural basis for inhibition of protein tyrosine phosphatases by Keggin compounds phosphomolybdate and phosphotungstate

Protein-tyrosine phosphatases (PTPs) constitute a family of receptor-like, and cytoplasmic enzymes, which catalyze the dephosphorylation of phosphotyrosine residues in a variety of receptors and signaling molecules. Together with protein tyrosine kinases (PTKs), PTPs are critically involved in regulating many cellular signaling processes. In this study, diverse compounds were screened for PTP inhibition and selectively screened for inhibitors with the end product inhibition properties. Among phosphate analogues and their derivatives for PTP inhibition, Keggin compounds phosphomolybdate (PM) and phosphotungstate (PT) strongly inhibited both PTP-1B and SHP-1, with K(i) values of 0.06-1.2 micromM in the presence of EDTA. Unlike the vanadium compounds, inhibition potencies of PM and PT were not significantly affected by EDTA. PM and PT were potent, competitive inhibitors for PTPs, but relatively poor inhibitors of Ser/Thr phosphatase. Interestingly, PM and PT did not inhibit alkaline phosphatase at all. The crystal structure of PTP-1B in complex with PM, at 2.0 A resolution, reveals that MoO(3), derived from PM by hydrolysis, binds at the active site. The molybdenium atom of the inhibitor is coordinated with six ligands: three oxo-ligands, two apical water molecules and a S atom of the catalytic cysteine residue. In support of the crystallographic finding, we observed that molybdenium oxides (MoO(3), MoO(2), and MoO(2)Cl(2)) inhibited PTP-1B with IC(50) in the range 5-15 micromM.     

Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

Aqua dissociation nature of cesium hydroxide

To understand the mechanism of aqueous base dissociation chemistry, the ionic dissociation of cesium-hydroxide in water clusters is examined using density functional theory and ab initio calculations. In this study, we report hydrated structures, stabilities, thermodynamic quantities, dissociation energies, infrared spectra, and electronic properties of CsOH(H(2)O)(n=0-4). With the addition of water molecules, the Cs-OH bond lengthened significantly from 2.46 A for n=1 to 3.08 A for n=4, which causes redshift in Cs-O stretching frequency. It is found that three water molecules are needed for the dissociation of Cs-OH, in contrast to the case of strong acid dissociation which requires at least four water molecules. However, the dissociation for n=3 could be considered as incomplete because a very weak CS em leader OH stretch mode is still present, while that for n=4 is complete since the Cs em leader OH mode no longer exists. This study can be related with hydration chemistry of cations and anions, and extended into the intra- and intercharge-transfer phenomena.