Catalytic carbonylation for the synthesis of chemical intermediates

Chemistry related to three catalytic carbonylation reactions is discussed. Synthesis of diphenylurea from nitrobenzene, aniline, and CO gives isolated yields above 98% at 100–120 °C and 15–60 bar of CO in the presence of a palladium (II) complex, PPh₃ and NEt₄Cl. Experimental evidence was provided to prove a new reaction stoichiometry and involvement of a carbamoyl intermediate. In carbonylation of HCHO over ion exchange resin catalysts, reaction temperature, time, pressure, and solvent were important variables to obtain high yields of methyl glycolate. Carbonylation of isobutylphenylethanol at 120°C and 40 bar of CO in the presence of PdCl₂−PPh₃−HCl gives 98% yield of α-(4-isobutylphenyl) propionic acid (ibuprofen). Each catalyst component had a definite role that is indispensable for an efficient overall reaction.     

Radioisotopes of thirteen elements in intertidal coastal and estuarine sediments in the Irish Sea

A survey has been carried out of⁴⁰K,⁶⁰Co,⁹⁹Tc,¹⁰⁶Ru,¹²⁵Sb,¹²⁹I,¹³⁴Cs,¹³⁷Cs,¹⁵⁴Eu,²²⁶Ra,²²⁸Ra,²³⁷Np,²³⁸Pu,^239,240Pu,²⁴¹Pu,²⁴¹Am,²⁴²Cm, and^243,244Cm activities in sediments from the Irish Sea. Several of these radionuclides were measured independently at two separate laboratories to enable the intercomparison of the results produced. The comprehensive data set generated allows the present spatial distributions of these radionuclides in coastal sediments to be examined in relation to sediment textural characteristics and by comparison with earlier survey, enables the temporal trends in their activities to be determined. In general all artificial radionuclides showed lower activities in sediments in response to falling discharges from Sellafield and relationships with either grain size, distance from Sellafield or both. Isotope ratios were similar to cumulative weighted activity ratios rather than present day values due to sediment mixing. Pu levels supplied evidence for the lag in response of sediment deposits with increasing distance from Sellafield due to sediment transport.     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.     

Syntheses and characterization of two new zinc phosphites with 1D chains decorated by Zn-centered complexes

Two inorganic-organic hybrid solids, Zn₂(phen)(HPO₃)₂ (1) and Zn(phen)(HPO₃) (2), have been synthesized under solvothermal conditions in the presence of 1,10-phenanthroline (phen) ligands. Their structures were determined by single-crystal X-ray diffraction and further characterized by FTIR, elemental analysis, powder X-ray diffraction, thermogravimetric analysis and fluorescent spectra. Compound 1 crystallizes in the triclnic system, space group P-1, , , , α=75.609(1)°, β=79.145(2)°, γ=67.157(2)°, , Z=2. Compound 2 is monoclinic, C2/c, , , , β=94.175(4)°, , Z=8. Both structures consist of 1D chains constructed from strictly alternating ZnO₄ and HPO₃ polyhedra through sharing vertices. The chains are further decorated by Zn-centered complex architectures, [Zn(phen)]²⁺ for 1 and [Zn(phen)₂]²⁺ for 2. The 2D and 3D supramolecular arrays for 1 and 2 are stably stacked via strong π-π interactions of the phen groups, respectively.     

Strategies for multi-site GLP studies

 A GLP study can be performed at more than one site. This is called a multi-site study. Although, the study is performed at different sites, it is still one study and must completely comply with the GLP principles. The fact that different activities are conducted at different sites implies that the planning, the organization and the communication are crucial for the success of the study. This means that all the staff involved should know their responsibilities and should have the knowledge and skills to realize all the phases of the study according to the GLP principles. To achieve a well managed multi-site study, several strategies for setting up such a study can be followed. This paper focuses on the responsibilities, communication, and collaboration of the personnel, which are involved in a multi-site study. Several case studies are highlighted, and we concluded that the basic communication triangle in a single-site GLP study between test facility management, study director, and the quality assurance unit should be extended to the communication among test facility and test site management, study director, principle investigator(s), and the quality assurance units at the test sites. Introduction Received: 14 August 2002 Accepted: 26 November 2002     

The concerted addition of HBr to aryl alkynes; orthogonal pi bond selectivity

In a weakly acidic solution, the addition of HBr to 1-phenylprop-1-yne produces predominantly the anti-Markovnikov product. In this paper, we consider five possible explanations for this behavior and conclude that the concerted addition is occurring on the acetylenic pi bond orthogonal to the extended aromatic pi system. The electronic effect of the distal methyl group and the steric hindrance of the coplanar phenyl ring combine to promote bromide attack at the beta carbon. Attack on this pi bond is insensitive to the electronic effect of meta and para substituents on the ring but is very (sterically) sensitive toward all ortho substituents.     

Capillary electrophoresis with amperometric detection of curcumin in Chinese herbal medicine pretreated by solid-phase extraction

In the present study, curcumin from Chinese herbal medicine turmeric was determined by capillary electrophoresis with amperometric detection (CE-AD) pretreated by a self-designed, simple, inexpensive solid-phase extraction (SPE) cartridge based on the material of tributyl phosphate resin. An average concentration factor of 9 with the recovery of > 80% was achieved when applied to the analysis of curcumin in extracts of tumeric. Under the optimized CE-AD conditions: a running buffer composed of 15 mM phosphate buffer at a pH 9.7, separation voltage at 16 kV, injection for 6 s at 9 kV and detection at 1.20 V, CE-AD with SPE exhibited low detection limit as 3 x 10(-8) mol/l (S/N = 3), high efficiency of 1.0 x 10(5) N, linear range of 7 x 10(-4) -3 x 10(-6) mol/l (r = 0.9986) for curcumin extracted from light petroleum. The method developed resulted in enhancement of the detection sensitivity and reduction of interference from sample matrix in complicated samples and exhibited the potential application for routine analysis, especially in food, because a relatively complete process of sample treatment and analysis was described.     

Electrocatalytic activity of binary Palladium Ruthenium anode catalyst on Ni-support for ethanol alkaline fuel cells

In search for a cheaper anode catalyst for the oxidation of ethanol for development of direct alcohol fuel cells, Pd has been considered here as an interesting substitute for Pt in Pt Ru binary electrodeposite. The binary catalyst when co-deposited on nickel support has been found to increase the current density and decrease the anodic overvoltage significantly with respect to pure Pt, Pd and Ni. Its electrocatalytic capability is also comparable with that of the Pt-Ru binary electrocatalyst on Ni-support, when studied in 1 M EtOH containing 1 M NaOH solution. The effect of loading of Pd Ru electrocatalyst on Ni support has also been tested. The electrocatalytic activity of the electrodes for oxidation of ethanol has been explained by studies of cyclic voltammetry, chronopotentiometry, steady-state polarization, and conjugated scanning electron microscopy–energy dispersion X-ray spectroscopy. It has been found that electrode containing the higher amount of deposit are less affected by carbonaceous poisons.     

Condensation of 4-aryl-4-oxobutanoic acids with benzylamines: Synthetic and structural studies on 1-arylmethyl-3-[(<Emphasis Type="Italic">E</Emphasis>)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-2-pyrrolones

The microwave-mediated reaction of 4-aryl-4-oxobutanoic acids with benzylamines furnished 1-arylmethyl-3-[(E)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-pyrrolones. This result is in contract to the earlier report on this reaction conducted under neat conditions. Structures for the products were assigned on the basis of spectral data and confirmed by independent synthesis. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 368–373, March, 2007.     

Qualitative features of the two-dimensional Raman spectrum in liquids

The theory presented earlier [J. Kim and T. Keyes, Phys. Rev. E 66, 051110 (2002)] is analyzed to determine the information available from the two-dimensional Raman spectrum R((5))(t(2),t(1)) in liquids. The known spectra are well represented by the sum of two products of ordinary time correlations predicted by the theory. The shape of R((5)) is related in general to the values of simple same-time averages and concepts amenable to physical intuition. Using standard models for the time correlations entering the theory, specific analytic expressions for the spectrum are obtained depending on two parameters and a time scale, and the behavior of the spectrum is mapped out in the parameter space.