可膨胀过热水系统多气核演化过程与临界过热度分析

使用分子动力学方法,研究过热水系统均质沸腾核化过程.采用Langevin 动力学方法控制体积可变系统的温度与压力,更好地模拟了沸腾实际物理过程.得到了液相系统体积连续膨胀、分子间距逐渐增大,最终稳定在汽相的现象学规律.当过热温度较高时,亚稳态液相系统可能在局部形成不同大小的近球形区域：气核,这些气核是不稳定的,处于不断演化之中.通过分析分子所受引力与斥力的共同作用,得到了气核形成与消亡以及多个气核融合的机理.比较了模拟结果与经典沸腾理论的差异,提出了气核生长是比气泡生长更为微观过程的认识.通过研究不同过热 关键词： 过热水系统 分子动力学 气核 临界过热度     

低反轰多腔热阴极微波电子枪物理设计

 为了开展基于自由电子激光的紧凑型太赫兹源技术研究,获得高品质（强流、低能散、低发射度）电子束,提出了一个低反轰双路微波馈入多腔热阴极微波电子枪的设计方案。用两路独立微波馈入激励微波电子枪,一路由首腔馈入激励首腔和实现阴极表面建场引出电子,另一路由后续腔馈入并通过腔间耦合激励各腔。两路微波互不耦合,通过移相器实现首腔和第2腔之间的相移连续可调。理论模拟结果表明:在一个射频周期内,热阴极微波电子枪的电子反轰功率约8 kW,平均反轰功率仅为1.2 W（重复频率25 Hz和脉宽6 μs）。     

随机静态存储器低能中子单粒子翻转效应

 建立了中子单粒子翻转可视化分析方法,对不同特征尺寸（0.13~1.50 μm）CMOS工艺商用随机静态存储器(SRAM)器件开展了反应堆中子单粒子翻转效应的实验研究,获得了SRAM器件的裂变谱中子单粒子翻转截面随特征尺寸变化的变化趋势。研究结果表明:SRAM器件的特征尺寸越小,其对低能中子导致的单粒子翻转的敏感性越高。     

EAST装置内置低温冷凝泵低温分配阀箱的研制

在全超导磁约束核聚变试验装置EAST中,为了防止杂质从偏虑器靶板附近进入等离子体核心,为EAST长脉冲放电试验提供持续的排灰能力以及装置长冲放电等,低温冷凝泵是必不可少的部件之一,在装置真空室上下安装了内置低温凝泵以提高装置运行参数,为满足低温泵的低温条件,增加一低温分配阀箱给内置低温冷凝泵提供低温条件。文中介绍应用于EAST装置系统中的内置低温冷凝泵分配阀箱研制的技术要求、冷却流程、结构特征。     

Influence of interface roughness on reflectivity of tungsten/boron-carbide multilayers with variable hi-layer number by X-ray reflection and diffuse scattering

from layer to layer during multilayer growing. The variation of the reflectivity and interface roughness with bi-layer number is accurately explained by the presented real-structure model.     

The static and hyper-frequency magnetic properties of a ferromagnetic-ferroelectric composite

This paper reports the static and hyper-frequency magnetic properties, as well as their relationship with microstructure, of the ferromagnetic-ferroelectric co-fired composite ceramic, (1−x)Ba₂Zn_1.2Cu_0.8Fe₁₂O₂₂-xPb(Ni_1/3Nb_2/3)_0.8Ti_0.2O₃. The X-ray diffraction results did not detect any other phase in the co-fired ceramics, but found a crystal structural distortion of ferrite phase. Scanning electron microscopy photos showed that two phases’ grains matched well and stacked compactly and the hexagonal ferrite changed its grain morphology. The saturation magnetization increased with the reduction of magnetic phase in the range of 0<x<0.65 because of the stress-induced structural distortion. The permeability decreases monotonically with the reduction of magnetic phase in the whole composition range.     

Talbot effect under illumination of double femtosecond laser pulses

The Talbot effect under illumination of double femtosecond laser pulses has been reported. Spectrums of double femtosecond laser pulses with phase differences are quite different from that of one single femtosecond laser pulse. Therefore, the Talbot images of the double femtosecond laser pulses with phase differences are different from that of one single femtosecond laser pulse. Specifically, for the phase difference corresponding to π, the Talbot image shows the largest difference from that of one single pulse. Experimental results are in good agreement with the theoretical analysis. The behaviors of Talbot images under double femtosecond laser pulses illumination cannot be obtained under one femtosecond laser pulse, monochromatic or polychromatic light illumination. Therefore, it is a new interesting optical phenomenon for the Talbot effect which should have potential applications.     

Fibrinogen adsorption onto 316L stainless steel, Nitinol and titanium

Fibrinogen adsorption onto mechanically polished biomedical grade 316L stainless steel (316LSS), nickel titanium alloy (Nitinol) and commercially pure titanium (CpTi) surfaces were studied by measurements of adsorption isotherms and adsorption kinetics using an ex-situ wavelength dispersive spectroscopy technique (WDS). Surface composition, roughness and wettability of these materials were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and water contact angle (WCA) measurements. Adsorption isotherm results showed that surface protein concentration on these materials increased with increasing concentration of fibrinogen in phosphate buffer solution. The fibrinogen adsorption isotherms were modeled by both the monolayer Langmuir isotherm and the multilayer Brunauer-Emmett-Teller (BET) isotherm. The results strongly suggest that fibrinogen forms multilayer structures on these materials when the concentration in solution is high. Complementary measurements on the absorbed fibrinogen films by spectroscopic ellipsometry (SE) support this view.     

多孔硅拉曼光谱随激发功率变化的研究

用阳极氧化法新制备了多孔硅样品,以457．5nm固体激光器为激发光源,在不同激发功率下,获得了拉曼谱图和一些谱峰参量随激光功率的变化关系。解释了520cm^-1和300cm^-1附近拉曼峰随功率变化的一系列可逆的实验现象：随激光功率升高出现的红移和非对称性展宽,主要是由于样品局域平均粒径变小而受量子限域效应的影响导致的;样品局域平均粒径在表面上的二维减小与随激光功率升高而导致的局域温升并不违背基本的热力学定律;高功率时520cm^-1附近双峰的出现是由于多孔硅样品局域平均粒径达到一定阈值而导致的纵模和横模双声子模的分裂。