DFT/TDDFT investigation on bis-cyclometalated alkynylgold(III) complex: Comparison of absorption and emission properties

absorption and phosphorescent mechanism of three Au(III) complexes, Au(2,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au25FPh], Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au35FPh], and Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(1H-indole)2 [Au35FID], are calculated and compared using density functional theory (DFT) and time-dependent DFT (TDDFT). The calculated results reveal that enlarging the center C^C^C ligand will result in the enhanced LMCT participation. This theoretical contribution allows design of new Au(Ⅲ) complexes with higher phosphorescence efficiency.     

Engineering the Mesopores of Fe3O4@Mesosilica Core–Shell Nanospheres through a Solvothermal Post‐Treatment Method

A solvothermal post‐treatment method was developed to synthesize Fe₃O₄@mesosilica core–shell nanospheres (CSNs) with a well‐preserved morphology, mesoporous structure, and tunable large pore diameters (2.5–17.6 nm) for the first time. N,N‐Dimethylhexadecylamine (DMHA), which was generated in situ during the heat‐treatment process, was mainly responsible for this pore‐size enlargement, as characterized by NMR spectroscopy. This pore‐size expansion can be strengthened with the aid of hexamethyldisilazane (HMDS), whilst the nature of the surface of the Fe₃O₄@mesosilica CSNs can be easily modified with trimethylsilyl groups during the pore‐size‐expansion process. The hydrophobicity of the Fe₃O₄@mesosilica CSNs increased for the enlarged mesopores and the adsorption capacity of these CSNs for benzene (up to 1.5 g g^?1) is the highest ever reported for Fe₃O₄@mesosilica CSNs. The resultant Fe₃O₄@mesosilica CSNs (pore size: 10 nm) showed a 3.6‐times higher adsorption capacity of lysozyme than those without the pore expansion (pore size: 2.5 nm), thus making them a good candidate for loading large molecules.     

Colorimetric and ratiometric fluorescent detection of sulfite in water via cationic surfactant-promoted addition of sulfite to α,β-unsaturated ketone

Three fluorescent probes were constructed by incorporating an α,β-unsaturated ketone to a coumarin fluorophore. The selective addition of sulfite to the alkene of TSP assisted by cetyltrimethyl ammonium bromide (CTAB) micelle can be visualized by dramatic color and ratiometric fluorescence changes. In CTAB–PBS system, the fluorescence intensity ratio at 465 nm and 592 nm (I₄₆₅/I₅₉₂) and the absorbance ratio at 390 nm and 470 nm (A₃₉₀/A₄₇₀) were linearly proportional to sulfite concentration in the range of 0.5–150 μM, and the detection limit was 0.2 μM. Good selectivity and competition of TSP1 towards sulfite over several anions and biological thiols were acquired. Probe TSP1 was used to detect sulfite in three realistic samples (mineral water, sugar and white wine) with good recovery.     

Automated high performance liquid chromatography with on-line reduction of disulfides and chemiluminescence detection for determination of thiols and disulfides in biological fluids

In general, the reduction of disulfide bonds with tris(2-carboxyethyl)phosphine (TCEP) is performed using off-line operation, which is not only time-consuming but also vulnerable to the spontaneous re-oxidation of thiols during sample preparation and subsequent analysis procedures. To the best of our knowledge, there has been not any case on the on-line reduction for biological disulfides coupled with high performance liquid chromatography (HPLC). In this study, these obstacles are overcome by packing Zn(II)-TCEP complexes into a home-made column. The as-synthesized Zn(II)-TCEP complexes enable efficient reduction of disulfide bonds at pH 3.0. This acidic pH value was compatible with that of the mobile phase for HPLC separation of thiols and disulfides. Therefore, using fluorosurfactant-prepared triangular gold nanoparticles as HPLC postcolumn specific chemiluminescence (CL) reagents for thiols, the feasibility of the established on-line reduction column has been confirmed for the direct identification of both thiols and disulfides by incorporating this reduction column into a single chromatographic separation. Detection limits for these analytes range from 8.3 to 25.4 nM and the linear range in a log–log plot can comprise three orders of magnitude. Finally, the utility of this automated on-line reduction of disulfides-HPLC-CL system has been demonstrated for the reliable determination of thiols and disulfides in human urine and plasma samples.     

Development of a Sensitive Method for the Determination of 4‐(Methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in Human Urine Using Solid‐phase Extraction Combined with Ultrasound‐assisted Dispersive Liquid–liquid Microextraction and LC‐MS/MS Detection

An efficient and sensitive analytical method based on molecularly imprinted solid‐phase extraction (MISPE) and reverse‐phase ultrasound‐assisted dispersive liquid–liquid microextraction (USA‐DLLME) coupled with LC–MS/MS detection was developed and validated for the analysis of urinary 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a tobacco‐specific nitrosamine metabolite. The extraction performances of NNAL on three different solid‐phase extraction (SPE) sorbents including the hydrophilic‐lipophilic balanced sorbent HLB, the mixed mode cationic MCX sorbent and the molecularly imprinted polymers (MIP) sorbent were evaluated. Experimental results showed that the analyte was well retained with the highest extraction recovery and the optimum purification effect on MIP. Under the optimized conditions of MIP and USA‐DLLME, an enrichment factor of 23 was obtained. Good linearity relationship was obtained in the range of 5‐1200 pg/mL with a correlation coefficient of 0.9953. The limit of detection (LOD) was 0.35 pg/mL. The recoveries at three spiked levels ranged between 88.5% and 93.7%. Intra‐ and inter‐day relative standard deviations varied from 3.6% to 7.4% and from 5.4% to 9.7%, respectively. The developed method combing the advantages of MISPE and DLLME significantly improves the purification and enrichment of the analyte and can be used as an effective approach for the determination of ultra‐trace NNAL in complex biological matrices.     

A High Yield Method of Extracting Alkaloid from Aconitum coreanum by Pulsed Electric Field

A high yield method to extract alkaloids from Aconitum coreanum using pulsed electric field (PEF) was developed, and the optimized extraction method compared to the other four extraction methods, consisting of cold maceration extraction, percolation extraction, heat reflux extraction (HRE), and ultrasonic-assisted extraction (UE). The experimental factors of the extraction methods such as electric field intensity, pulse frequency and solid-to-solvent ratio were evaluated. The content of Guanfu base A (GFA) was quantified by liquid chromatography coupled with electrospray ionization tandem mass spectrometry. The results indicated that the highest yield of GFA was 3.94 mg g^?1 by PEF with conditions of 20 kV cm^?1 electric field intensity, 8 pulse, 1:12 solid-to-solvent ratio, and 90 % ethanol–water solution. Meanwhile, the extraction time of PEF was <1 min, which is much less than the HRE of 10 h and even the newly used technique UE of 40 min. Moreover, the results of PEF extraction method showed obvious advantages, with the highest efficiency (120 L h^?1), the shortest extraction time (0.5–1 min), and the lowest energy costs, which could be applied in the industrial production of alkaloids from A. coreanum. Therefore, the application of the PEF extraction method is a promising and constructive method for extraction of GFA.     

Stereospecific radical polymerization of optically active (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide catalyzed by Lewis acids

The effects of Lewis acids, namely, rare earth metal trifluoromethanesulfonates, on the radical polymerization of (S)-N-(2-hydroxy-1-phenylethyl) methacrylamide were examined under various conditions. In the absence of Lewis acids, syndiotactic-rich polymers (r = 84%) were obtained, whereas in the presence of a catalytic amount of Lewis acids, the polymerization proceeded in an isotactic-specific manner (m up to 64%). Polymerization solvents strongly influenced the effect of the Lewis acids. The polymerization in n-butyl alcohol showed the highest isotactic selectivity, whereas the polymerization in DMSO showed no isotacticity-enhancing effect. Further increases in the Lewis acid concentration and the polymerization temperature did not produce clear effects on the tacticity of the polymers. The interaction between the monomer and Lewis acids was investigated, and the plausible mechanism of stereocontrol in the radical polymerization of (S)-HPEMA was analyzed based on the Lewis acid-monomer interaction.     

Crowding effect induced phase transition of amphiphilic diblock copolymer in solution

The crowding agent induced phase transition of amphiphilic block copolymers in solution was explicitly considered. The influence of the size and the volume fraction of the crowding agent on the phase separation of amphiphilic diblock copolymers is investigated by using self-consistent field theory (SCFT) method. The concentration of the disorder to order transition of the block copolymer decreases when the size of the crowding agent is larger than that of the solvent. The higher volume fraction of the crowding agent will induce the transition of the block copolymer from disorder to order state at a lower concentration. The relation between the size and the volume fraction of the crowding agent is elucidated. When the size of the crowding agent is larger, its volume fraction of the disorder to order transition of the block copolymer will be lower. The conformation of the crowding agent considered as a polymer chain is also studied and compared.     

Liquid crystalline behaviour of hydrazide derivatives containing alkoxyazobenzene

Two series of dissymmetric hydrazide derivatives containing alkoxyazobenzene with nitro terminal group and octyloxy terminal group, N-4-alkoxyphenyl-N′-4-((4-nitrophenyl)azophenyl) benzohydrazide (Bn-NO₂, n indicates the number of carbon atoms) and N-4-octyloxyphenyl-N′-4-((4-octyloxyphenyl)azophenyl) benzohydrazide (B8-B8), were designed and synthesised, and their liquid crystalline properties were investigated by means of differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. It was found that B8-B8 with octyloxy terminal chains displayed monolayer smectic C phase, whereas Bn-NO₂ with nitro terminal group displayed SmA_d phase, and intermolecular hydrogen bonding was confirmed as the driving force. In addition, the effect of hydrogen bonding, dipole–dipole interactions and steric hindrance effect on the liquid crystalline structures were also discussed.     

Synthesis and characterisation of 3-armed dendritic molecules with triphenylbenzene or triphenyltriazine as core and triphenylene derivative as shells

Two series 3-armed dendritic molecules with their 1,3,5-tris(4-methyloxyphenyl) benzene or 2,4,6-tris(4- hydroxylphenyl)-1,3,5-s-triazine core and triphenylene derivative shells connected by soft hydrocarbon chains have been synthesised and fully characterised. Whether liquid crystal (LC) or photoluminescence materials have been tuned by changing the length of the soft chain and they have been studied by POM, DSC, XRD, UV-Vis and PL. The results show that all the new dendritic compounds display UV to blue fluorescence in solvents such as DCM, THF and acetone. The TC3 compound bearing 1,3,5-tris(4-hydroxylphenyl) benzene core exhibits LC property with rectangular columnar phase (Col_r) on cooling.