Synthesis of (R)-dihydropyridones as key intermediates for an efficient access to piperidine alkaloids

The efficient transformation of D-glucal to (2R)-hydroxymethyldihydropyridinone 5 in seven steps and 35 % overall yield is reported. Dihydropyridone 5 constitutes a versatile chiral building block for the synthesis of various piperidine alkaloids. In this regard, 5 was converted to piperidinol 13 and piperidinone 15, that may be further elaborated for the syntheses of (+)-desoxoprosophylline (1) and deoxymannojirimycin (3) or D-mannolactam (4), respectively.     

Novel software for the assignment of peaks from tandem mass spectrometry spectra of synthetic polymers

Novel software has been developed to aid the interpretation of tandem mass spectrometry (MS/MS) data from synthetic polymers. The software is particularly focused toward aiding the end-group determination of these materials by significantly speeding up the interpretation process. This allows information on the initiator and/or chain transfer agents, used to generate the polymer, and the mechanism of termination to be inferred from the data much more rapidly. The software allows the validity of hypothesized structures to be rapidly tested by automatically annotating the data file using previously proposed fragmentation rules for synthetic polymers. Low-energy collision-induced dissociation (CID) data from methacrylate, styrene, and polyether oligomers are used as example data for the software. Exact-mass CID information was used to aid the understanding of the dissociation mechanism of the polymers. The software can use exact-mass data to provide more confidence in the results. The MS/MS results indicate that the fragmentation pathways are those previously proposed for these polymers.     

Synthesis and biological evaluation of new benzo[f]furo[2,3‐h]‐and benzo[f]pyrano[2,3‐h]coumarin derivatives.

Furocoumarins 3,5 and pyranocoumarin 7 were synthesized from the reaction of furonaphthalenediones 2,4 and pyranonaphthalenedione 6 respectively with carbethoxymethylene(triphenyl)phosphorane in refluxing DCM for 3‐6 hours or under microwave irradiation in toluene for a few minutes. Compounds 3,5,7 and their precursors were tested as anti‐inflammatory/antioxidant agents. They were found to compete significantly high DMSO for OH radicals, to scavenge O₂^? and to inhibit lipoxygenase to a high extent.     

Investigation of the incorporation of electrolyte anions in porous anodic Al2O3 films by employing a suitable probe catalytic reaction

A new method has been developed capable of describing the incorporation of electrolyte anions along the pore wall surface and across both the barrier layer and the pore wall oxide after the establishment of the steady state of growth of porous anodic Al₂O₃ where other methods cannot be applied to obtain reliable results. The knowledge of the nature/composition of anodic oxides as regards the incorporation of species like electrolyte anions is of specific importance for both the understanding of the electrochemical mechanism of oxide production and growth and the scientific and technological applications of porous anodic Al₂O₃ films. The method consists of the selection and use of a suitable catalytic probe reaction on porous anodic oxides at thicknesses varying from a value near zero up to the maximum limiting thickness and the treatment of the experimental reaction rate results by a properly developed mathematical formalism. This method was employed in anodic Al₂O₃ films prepared in H₂SO₄ anodizing electrolyte at a constant bath temperature and different current densities using as a probe reaction the decomposition of HCOOH on these oxides, which is almost exclusively a dehydration reaction, at relatively high reaction temperatures, 350 °C and 390 °C, where the effect of other species except SO₄ ²⁻ incorporated in the oxide on the reaction rate is eliminated. It has been shown that the fraction of the intercrystallite surfaces occupied by SO₄ ²⁻ follows a parabola-like distribution. It has a significant value at the pore base surface, depending on the current density, then it passes through a maximum along the pore wall surface and across both the barrier layer and the pore walls near the pore bases at positions depending on the current density and then becomes almost zero at the mouths of the pores of the oxide with the maximum limiting thickness and at both the Al₂O₃/Al interface and cell boundaries. The maximum value of the surface coverage is almost independent of the current density and is always near 1, showing an almost complete saturation of intercrystalline surfaces at these positions. The above distribution of surface coverage predicts a qualitatively similar distribution of the SO₄ ²⁻ bulk concentration across both the barrier layer and pore wall oxide around the pore bases. The method may be improved and developed further either for a more detailed investigation of the above films or to investigate films prepared in other pore-forming electrolytes. Received: 30 July 1998 / Accepted: 30 September 1998     

Synthesis of the One-dimensional Compound (Ph4P)[In(P2Se6)] in a Ph4P+-Containing Selenophosphate Flux,and Structure of [In(P2Se6)2]5– – a Discrete Molecular Fragment of the [In(P2Se6)]nn– Chain

The reaction of one equivalent of In with a molten flux of (Ph₄P)₂Se₅ and P₂Se₅ (1 : 2), at 250 °C gave the (Ph₄P)[In(P₂Se₆)] ( I ). Stoichiometric elemental synthesis at 750 °C produced the Cs₅In(P₂Se₆)₂ ( II ). The thin, yellow crystals of ( I ), and the irregular, dark orange crystals of ( II ), appear to be air- and water-stable. Compound ( I ) crystallizes in the monoclinic space group C2/c (no. 15) and at 23 °C: a = 23.127(7) Å, b = 6.564(1) Å, c = 19.083(3) Å, β = 97.42(2)°, V = 2873(1) ų, Z = 4, final R/R_w = 4.4/5.2%. Compound ( II ) crystallizes in the tetragonal space group P4₂/m (no. 84) and at 23 °C: a = b = 13.886(1) Å, c = 7.597(2) Å, V = 1464.9(3) ų, Z = 2, final R/R_w = 3.9/5.1%. Compound ( I ) contains infinite [In(P₂Se₆)]_n^n– with a structure related to that of K₂FeP₂Se₆. Compound ( II ) contains the discrete [In(P₂Se₆)₂]^5– which can be viewed as a fragment of the [In(P₂Se₆)]_n^n– chain.     

Probing hemoglobin structure by means of traveling-wave ion mobility mass spectrometry

Hemoglobin (Hb) is a tetrameric noncovalent complex consisting of two α- and two β-globin chains each associated with a heme group. Its exact assembly pathway is a matter of debate. Disorders of hemoglobin are the most common inherited disorders and subsequently the molecule has been extensively studied. This work attempts to further elucidate the structural properties of the hemoglobin tetramer and its components. Gas-phase conformations of hemoglobin tetramers and their constituents were investigated by means of traveling-wave ion mobility mass spectrometry. Sickle (HbS) and normal (HbA) hemoglobin molecules were analyzed to determine whether conformational differences in their quaternary structure could be observed. Rotationally averaged collision cross sections were estimated for tetramer, dimer, apo-, and holo-monomers with reference to a protein standard with known cross sections. Estimates of cross section obtained for the tetramers were compared to values calculated from X-ray crystallographic structures. HbS was consistently estimated to have a larger cross section than that of HbA, comparable with values obtained from X-ray crystallographic structures. Nontetrameric species observed included apo- and holo- forms of α- and β-monomers and heterodimers; α- and β-monomers in both apo- and holo- forms were found to have similar cross sections, suggesting they maintain a similar fold in the gas phase in both the presence and the absence of heme. Heme-deficient dimer, observed in the spectrum when analyzing commercially prepared Hb, was not observed when analyzing fresh blood. This implies that holo-α-apo-β is not an essential intermediate within the Hb assembly pathway, as previously proposed.     

Capillary waveguide fluoroimmunosensor with improved repeatability and detection sensitivity

An optical capillary waveguide fluoroimmunosensor based on glass capillaries internally coated with an ultrathin poly(dimethylsiloxane) (PDMS) film is presented. The evaluation of the capillaries developed was done in comparison with aminosilanized [3-(aminopropyl)triethoxysilane, APTES] glass and poly(methylpentene) (PMP) capillaries by immobilizing rabbit γ-globulins on the internal capillary wall. Following reaction with (R)-phycoerythrin-labelled antibody, the capillary was scanned with a laser beam and the fluorescence waveguided through the capillary wall was detected by a photomultiplier placed at one of its ends. The capillaries developed provided considerably improved protein coating homogeneity (intracapillary coefficients of variation 2.9–6.6%) and repeatability (intercapillary coefficients of variation 2.1–5.0%) compared with APTES-treated ones (7.9–13.4 and 8.5–15.2%, respectively). With use of these capillaries in a sandwich-type immunosensor for the determination of rabbit γ-globulins, the assay detection limit was improved eightfold (4.4 ng/mL) compared with that obtained using PMP capillaries (35.3 ng/mL), whereas the assay repeatability was improved threefold (intra-assay coefficients of variation 5.9–13.1%) compared with APTES-treated capillaries (15.6–36%). Optoelectronic set-up used to scan the capillaries (left) and representative fluorescence scannings of dual-band poly(methylpentene) (PMP), PDMS-modified glass and APTES treated glass capillaries     

APN permutations on and Costas arrays

We study PN and APN functions over the integers modulo n. We give some construction techniques based on Costas arrays, which allow us to construct APN permutations on where p is a prime. Although PN permutations do not exist, one set of our functions is very close to being a set of PN permutations.     

Magnetic resonance spectroscopy: a noninvasive diagnosis of gliomatosis cerebri

Gliomatosis cerebri (GC) is characterized by a diffuse infiltration of neoplastic glial cells with preservation of neuronal architecture. It can be very difficult to diagnose during life because the clinical manifestations are protean and tests are often nondiagnostic. The diagnosis of GC needs to be based on radiological, clinical and pathological criteria. We present a patient with GC, which initially presented as acute stroke attack. We discuss the usefulness of noninvasive methods, such a MR spectroscopy, in the diagnosis, grading and management of GC.     

In-plane stability of uniform steel beam-columns on a Pasternak foundation with zero end-shortening

The linearized buckling response of uniform steel beam-columns resting on a Pasternak foundation type is dealt with in this work. The corresponding two-point boundary value problem depends on the two parameters associated with the foundation model, that is, shear layer constant and Winkler spring coefficient, as well as on the axial loading. The fourth-order differential equation of buckling and the consequent characteristic one yield exact values of the buckling loads, which may lead to shape functions, being either one sinusoidal waveform or the sum of two different waveforms. The former case is associated with a single-mode response, while the latter with mode coupling. The conditions for which each of these cases characterizes the beam-column behavior are fully assessed and the dependence on the combination of the aforementioned parameters on the response is discussed in detail. It is found that regardless of the order of coupling, the corresponding mode is not related to rational values of buckling loads and hence this unfavorable phenomenon is excluded in structural design.