Controlling the Deintercalation in Hydrogenated Nitrile Rubber (HNBR)/Organo‐Montmorillonite Nanocomposites by Curing with Peroxide

Summary: The effect of peroxide vulcanization on organoclay dispersion in hydrogenated nitrile rubber (HNBR)/organo‐montmorillonite (organo‐MMT) nanocomposites was investigated. Three types of organoclays were tested, one containing a primary amine and two bearing quaternary intercalants. In contrast to sulfur vulcanization, which in combination with primary amine intercalants produced a confined/deintercalated clay structure, the peroxide curing yielded well‐ordered intercalated nanocomposites. The tensile mechanical performance and oxygen permeability of the HNBR nanocomposites were determined.

Oxygen permeability coefficient ratio for the different HNBR films tested at 0 and 60% relative humidity (i.e., dry and wet conditions, respectively).     

Experimental comparison of blow-off methods for plasma-density measurements

Two different methods for plasma-density measurement using blow-off neutral source were performed on the MT-1 tokamak. The two methods produce nearly the same results, but the pure blow-off method is the less precise. The blow-off combined with laser-induced fluorescence requires a complicated experimental arrangement and a simple evaluation, while the pure blow-off method demands a simpler experimental set-up and a complicated evaluation.     

Capillary electrophoretic analysis of wild type and mutant Proteus penneri outer membrane proteins

In this study the virulence factors, outer membrane proteins (OMP), lipopolysaccharides (LPS), hemolysin, and the in vivo and in vitro virulence of wild-type Proteus penneri 357 and its two isogenic mutant variants--a transposon and a spontaneous mutant--were examined. The OMPs of these variants were analyzed by a new and fast technique, "dynamic sieving" capillary electrophoresis (CE). The OMP profiles were dominated by two peaks (39 and 43 kDa). In the P. penneri clone examined, both the transposon and the spontaneous mutations induced significant changes in the OMP patterns (in the relative percentage of the dominant proteins). CE was suitable for the comparative analysis of bacterial protein patterns in the genetic variants of this strain, and provided valuable results in connection with the bacteriological virulence. The LPS composition of the genetic variants also showed alterations. The wild type of P. penneri 357 showed a typical ladder pattern, an "S" form, and the mutants possessed "R" LPS patterns (only few bands) in the gels. In the bacteriological virulence tests the wild type of P. penneri 357 was virulent in the in vivo, and toxic in the in vitro assays, while both mutants showed neither toxicity nor pathogenicity.     

Atomic force microscopy study on blend morphology and clay dispersion in polyamide‐6/polypropylene/organoclay systems

The phase structure and clay dispersion in polyamide‐6(PA6)/polypropylene(PP)/organoclay (70/30/4) systems with and without an additional 5 parts of maleated polypropylene (MAH‐g‐PP) as a compatibilizer were studied with atomic force microscopy (AFM). AFM scans were taken from the polished surface of specimens that were chemically and physically etched with formic acid and argon ion bombardment, respectively. The latter technique proved to be very sensitive to the blend morphology, as PP was far more resistant to ion bombardment than PA6. In the absence of the MAH‐g‐PP compatibilizer, the organoclay is located in the PA6 phase; this finding is in line with transmission electron microscopic results. Further, the PP is coarsely dispersed in PA6 and the adhesion between PA6 and PP is poor. The addition of MAH‐g‐PP resulted in a markedly finer PP dispersion and good interfacial bonding between PA6 and PP. In this blend, the organoclay was likely dispersed in the PA6‐grafted PP phase. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43:1198–1204, 2005     

A Sensitive Method for Thin-Layer Chromatographic Detection of Amphotericin B

JPC – Journal of Planar Chromatography – Modern TLC - Thin-layer chromatography with microbiological detection (direct bioautography) of amphotericin B. has never been reported. The...     

Behaviour of discontinuous gold films on SrTiO3 substrates under annealing

Morphological changes of thin, discontinuous gold films on SrTiO₃ substrates, resulting from evaporation in the temperature range of 1143-1278 K, have been investigated by means of scanning electron microscopy (SEM) and atomic force microscopy (AFM). If the gold covered fraction of the surface is small, the evaporation kinetics can be related to the desorption of adatoms. Measuring the density of the gold beads and the time dependence of the effective thickness of the film as calculated from the diameter of the beads, the following parameters have been determined: the surface diffusion length of the gold adatoms, , the mass transfer surface diffusion coefficient, and the evaporation flux, .     

Compatibilization effect of TiO2 nanoparticles on the phase structure of PET/PP/TiO2 nanocomposites

Polyethylene terephthalate (PET)/Polypropylene (PP)/TiO₂ nanocomposites were prepared by compounding a PP/TiO₂ nanocomposite premix with PET in absence and presence (up to 6 vol %) of maleic anhydride grafted polypropylene (PP‐g‐MA). In absence of PP‐g‐MA, the TiO₂ nanoparticles were mainly located at the PET/PP interface and to a lesser extent in the dispersed PET droplets. As the TiO₂ nanoparticles were coated by polyalcohol their surface could react with PP‐g‐MA and thus improving the compatibilization with PP. Therefore in presence of PP‐g‐MA the TiO₂ nanoparticles were preferentially located in the PP. The incorporated TiO₂ nanoparticles exerted a compatibilization effect on the PET/PP blend. Depending on the location of TiO₂ three different compatibilization mechanisms were proposed to be at work: (1) Locating at the interface, the TiO₂ nanoparticles decrease the free energy of mixing, and thus increase the thermodynamic stability of the nanocomposites; (2) The TiO₂ nanoparticles at the interface also prevent the coalescence of PET droplets; (3) Preferentially located in the PP matrix, the TiO₂ nanoparticles decreased the viscosity ratio which facilitated the droplet breakup of PET. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1616–1624, 2009     

Multiplicity distributions and double scattering effects in π−d interactions at 205 GeV

Multiplicity distributions of charged secondaries, σ_N(π^?d) are obtained. The effective multiplicities σ_N(π^?n) and σ_N(π^?p) are extracted using the measured spectator momentum. The probability of double scattering P_N is found to be independent of multiplicity.     

Transmembrane signal transduction by cofactor transport

Information processing and cell signalling in biological systems relies on passing chemical signals across lipid bilayer membranes, but examples of synthetic systems that can achieve this process are rare. A synthetic transducer has been developed that triggers catalytic hydrolysis of an ester substrate inside lipid vesicles in response to addition of metal ions to the external vesicle solution. The output signal generated in the internal compartment of the vesicles is produced by binding of a metal ion cofactor to a head group on the transducer to form a catalytically competent complex. The mechanism of signal transduction is based on transport of the metal ion cofactor across the bilayer by the transducer, and the system can be reversibly switched between on and off states by adding cadmium(ii) and ethylene diamine tetracarboxylic acid input signals respectively. The transducer is also equipped with a hydrazide moiety, which allows modulation of activity through covalent conjugation with aldehydes. Conjugation with a sugar derivative abolished activity, because the resulting hydrazone is too polar to cross the bilayer, whereas conjugation with a pyridine derivative increased activity. Coupling transport with catalysis provides a straightforward mechanism for generating complex systems using simple components.

Synthetic transducers transport externally added metal ion cofactors across the lipid bilayer membrane of vesicles to trigger catalysis of ester hydrolysis in the inner compartment. Signal transduction activity is modulated by hydrazone formation.