Capillary electrophoresis of trace metals in highly saline physiological sample matrices

Trace metal ions in highly saline samples such as urine were determined with capillary electrophoresis (CE) without desalting or off-line preconcentration. By mixing with a dye, 4-(2-pyridylazo) resorcinol (PAR), the metal ions were converted into anionic complexes having strong absorbance near 500 nm. A large volume of the metal-PAR complex sample solution injected into a coated capillary was stacked isotachophoretically and separated under a reverse potential. The salt anion (chloride) and PAR in the sample matrix acted as the leading and terminating electrolytes, respectively. In a sample containing a 250 mM NaCl matrix, more than 400-fold enhancement in the absorbance detector response was realized compared to the normal CE injection mode. Combination of the dye complexation and isotachophoretic stacking provided excellent detection limits (S/N = 3) for three trace metal ions in the low ppb range (Fe(2+), 0.7 ppb, Ni(2+), 0.4 ppb; Zn(2+), 1.2 ppb) with absorbance detection. The migration time reproducibility was excellent (relative standard deviations: standard samples < 1%, urine samples approximately 1%). The proposed method is convenient and fast, and the sample analysis can be completed within 20 min.     

Determination of palladium(II) with alpha-(2-benzimidazolyl)-alpha',alpha'-(N-5-nitro-2-pyridylhydrazone)-toluene by adsorptive cathodic stripping voltammetry

The determination of palladium(II) complexed with alpha-(2-benzimidazolyl)-alpha',alpha'-(N-5-nitro-2-pyridylhydrazone)-Toluene (BINPHT) was investigated by adsorptive cathodic stripping voltammetry using hanging mercury drop electrode. Palladium(II) in the sample solution can be determined in BINPHT and ethylenediaminetetraacetic acid (EDTA). Accumulation is achieved by adsorption of Pd(II)-BINPHT complex on a hanging mercury drop electrode. Optimal conditions were found to be: supporting electrolyte; 0.01 M sodium acetate buffer at pH 5.0, accumulation potential; -590 mV versus Ag/AgCl, accumulation time; 180 s, scan rate; 50 mV s(-1), concentration of BINPHT; 2x10(-5) M. The linear range of Pd(II) was observed over the concentration range 20-100 ng ml(-1) The detection limit (S/N=3) is 2 ng ml(-1). A good reproductivity shows RSD of 2.0% (n=7). This procedure offers high selectivity with the presence of EDTA masking some metallic ions. River water sample spiking with palladium was determined.     

The adsorption of triethylenediamine on Al(2)O(3)-II: hydrogen bonding to Al-OH groups

The hydrogen bonding of the triethylenediamine (TEDA) molecule to isolated Al-OH groups on partially dehydroxylated high area gamma-Al(2)O(3) powder has been studied using transmission IR spectroscopy. It has been found that TEDA adsorbs both singly and as multiple species to single Al-OH groups in clearly separable equilibrium stages of adsorption at 300 K. The reversible adsorption of a single TEDA molecule to Al-OH fits the Langmuir adsorption isotherm well, and the enthalpy of adsorption is found to be -15.6 +/- 0.5 kJ mol(-1) in the range of fractional coverage of 0.5-0.6. Red shifts of the Al-OH frequency from approximately -200 cm(-1) to approximately -1000 cm(-1) are observed as a result of -OH bonding to the N lone pair in the TEDA molecule.     

Development and validation of analytical methodology using capillary electrophoresis for separation and determination of anions in rainwater

A new capillary electrophoresis (CE) procedure was developed for simultaneous determination of both organic and inorganic anions in rain water using a background electrolyte (BGE) containing 5 mM molybdate, 0.15 mM CTAH, 0.01% PVA and 5 mM Tris buffer to adjust pH at 7.9. Under optimised conditions, good repeatability (RSD for sulphate in migration time=0.36% and peak area=4.2%), low detection limit (2 ppb for chloride) and satisfactory working range (50 ppb-20 ppm for hydrodynamic injection, 10 ppb-3 ppm for electrokinetic injection for chloride) were obtained. The reliability of the CE procedure developed was established by satisfactory recovery tests and good agreement of results obtained by both the CE and ion chromatography (IC) methods. The procedure developed had been successfully applied for field monitoring of rainwater showing good repeatability and capability of detecting trace anions at ppb levels beyond the IC working range. Thus, the new CE procedure developed provides a quick, sensitive, economic and reliable method to meet the need for the simultaneous determination of both organic and inorganic anions in the acid rain monitoring programme.     

NMR study on the tautomeric equilibria between the hydrazone imine and diazenyl enamine forms in side chained quinoxalines: Solvent effects and temperature dependence

The reaction of 7-chloro-4-ethoxycarbonylmethylene-4,5-dihydro-1,2,4-triazolo[4,3-a]quinoxaline 6 with 4-ethoxycarbonyl-1-methyl-1H-pyrazole-5-diazonium chloride or 4-cyano-1,3-dimethyl-1H-pyrazole-5-diazonium chloride gave 7-chloro-4-[α-(4-ethoxycarbonyl-1-methyl-1H-pyrazol-5-ylhydrazono)-ethoxycarbonylmethyl]-1,2,4-triazolo[4,3-a]quinoxaline 8a or 7-chloro-4-[α-(4-cyano-1,3-dimethyl-1H-pyrazol-5-ylhydrazono)ethoxycarbonylmethyl]-1,2,4-triazolo[4,3-a]quinoxaline 8b , respectively, while the reaction of 7-chloro-4-ethoxycarbonylmethylene-4,5-dihydrotetrazolo[1,5-a]quinoxaline 7 with 4-ethoxycarbonyl-1-methyl-1H-pyrazole-5-diazonium chloride or 4-cyano-1,3-dimethyl-1H-pyrazole-5-diazomum chloride provided 7-chloro-4-[α-(4-ethoxycarbonyl-1-methyl-1H-pyrazol-5-ylhydrazono)ethoxycarbonylmethyl]tetrazolo[1,5-a]quinoxaline 9a or 7-chloro-4-[α-(4-cyano-1,3-dimethyl-1H-pyrazol-5-ylhydrazono)ethoxycarbonylmethyl]tetrazolo[1,5-a]quinoxaline 9b , respectively. Compounds 8a,b and 9a,b showed the tautomeric equilibria between the hydrazone imine C and diazenyl enamine D forms in dimethyl sulfoxide and/or trifluoroacetic acid, and the effects of solvent and temperature on the tautomer ratios of C to D were studied by the nmr measurements in a series of mixed trifluoroacetic acid/dimethyl sulfoxide media (compounds 8a,b and 9a,b ) and at various temperatures (compounds 8a,b ).     

Site-specific amide hydrogen/deuterium exchange in E. coli thioredoxins measured by electrospray ionization mass spectrometry

Mass spectrometry as an analytical tool to study protein folding and structure by hydrogen/deuterium exchange is a relatively new approach. In this study, site-specific amide deuterium content was measured in oxidized and reduced E. coli thioredoxins by using the b(n) ions in electrospray ionization CID MS/MS experiments after 20-s incubation in D(2)O phosphate-buffered solution (pH 5.7). The deuterium levels correlated well with reported NMR-determined H/D exchange rate constants. The deuterium measured by y(n) ions, however, showed much less reliable correlation with rate exchange data. In general, residues in alpha helices and beta sheets, when measured by b(n) ions, showed low incorporation of deuterium while loops and turns had high deuterium levels. Most amide sites in the two protein forms showed similar deuterium levels consistent with the expected similarity of their structures, but there were some differences. The turn consisting of residues 18-22 in particular showed more variability in deuterium content consistent with reported structural differences in the two forms. The deuterium uptake by thioredoxins alkylated at Cys-32 by S-(2-chloroethyl)glutathione and S-(2-chloroethyl)cysteine, in peptides 1-24 and 45-58, was similar to that observed for oxidized and reduced thioredoxins, but several residues, particularly Leu-53 and Thr-54, showed slightly elevated deuterium levels, suggesting that structural changes had occurred from alkylation of the protein at Cys-32. It is concluded that b(n) ions are reliable for determining the extent of site-specific amide hydrogen isotope exchange and that mass spectrometry is useful as a complementary technique to NMR and other analytical methods for probing regional structural characteristics of proteins.     

Organometallic reagents in organic synthesis—V: An organocuprate conjugate addition—Aldol condensation synthetic procedure for sequential formation of two carbon-carbon bonds

The enolates produced from the conjugate addition reaction of lithium dialkylcuprates with α,β- unsaturated ketones react with aldehydes in the presence of zinc chloride to give overall β-alkyl α-hydroxyalkyl addition to the original alkene. Reaction of these enolates with carbon dioxide and ethyl formate is also reported.     

Excitation-energy migration in self-assembled cyclic zinc(II)-porphyrin arrays: a close mimicry of a natural light-harvesting system

The excitation-energy-hopping (EEH) times within two-dimensional cyclic zinc(II)-porphyrin arrays 5 and 6, which were prepared by intermolecular coordination and ring-closing metathesis reaction of olefins, were deduced by modeling the EEH process based on the anisotropy depolarization as well as the exciton-exciton annihilation dynamics. Assuming the number of energy-hopping sites N = 5 and 6, the two different experimental observables, that is, anisotropy depolarization and exciton-excition annihilation times, consistently give the EEH times of 8.0 +/- 0.5 and 5.3 +/- 0.6 ps through the 1,3-phenylene linkages of 5 and 6, respectively. Accordingly, the self-assembled cyclic porphyrin arrays have proven to be well-defined two-dimensional models for natural light-harvesting complexes.     

Unprecedented head-to-head conformers of d(GpG) bound to the antitumor active compound tetrakis (mu-carboxylato)dirhodium(II,II)

The N7/O6 equatorial binding interactions of the antitumor active complex Rh(2)(OAc)(4)(H(2)O)(2) (OAc(-) = CH(3)CO(2)(-)) with the DNA fragment d(GpG) have been unambiguously determined by NMR spectroscopy. Previous X-ray crystallographic determinations of the head-to-head (HH) and head-to-tail (HT) adducts of dirhodium tetraacetate with 9-ethylguanine (9-EtGH) revealed unprecedented bridging N7/O6 guanine nucleobases that span the Rh-Rh bond. The absence of N7 protonation at low pH and the notable increase in the acidity of N1-H (pK(a) approximately 5.7 as compared to 8.5 for N7 only bound platinum adducts), suggested by the pH dependence titrations of the purine H8 (1)H NMR resonances for Rh(2)(OAc)(2)(9-EtG)(2) and Rh(2)(OAc)(2-)[d(GpG)],are consistent with bidentate N7/O6 binding of the guanine nucleobases. The pK(a) values estimated for N1-H (de)protonation, from the pH dependence studies of the C6 and C2 (13)C NMR resonances for the Rh(2)(OAc)(2)(9-EtG)(2) isomers, concur with those derived from the H8 (1)H NMR resonance titrations. Comparison of the (13)C NMR resonances of C6 and C2 for the dirhodium adducts Rh(2)(OAc)(2)(9-EtG)(2) and Rh(2)(OAc)(2)[d(GpG)] with the corresponding resonances of the unbound ligands [at pH 7.0 for 9-EtGH and pH 8.0 for d(GpG)], shows substantial downfield shifts of Deltadelta approximately 11.0 and 6.0 ppm for C6 and C2, respectively; the latter shifts reflect the effect of O6 binding to the dirhodium centers and the ensuing enhancement in the acidity of N1-H. Intense H8/H8 ROE cross-peaks in the 2D ROESY NMR spectrum of Rh(2)(OAc)(2)[d(GpG)] indicate head-to-head arrangement of the guanine bases. The Rh(2)(OAc)(2)[d(GpG)] adduct exhibits two major right-handed conformers, HH1 R and HH2 R, with HH1 R being three times more abundant than the unusual HH2 R. Complete characterization of both adducts revealed repuckering of the 5'-G sugar rings to C3'-endo (N-type), retention of C2'-endo (S-type) conformation for the 3'-G sugar rings, and anti orientation with respect to the glycosyl bonds. The structural features obtained for Rh(2)(OAc)(2))[d(GpG)] by means of NMR spectroscopy are very similar to those for cis-[Pt(NH(3))(2))[d(GpG)]] and corroborate molecular modeling studies.