Effect of titanium dioxide on photostability of solid-state mequitazine

TiO(2) has been widely used in pharmaceutical products, and it also has been used as a photocatalyst. In this study, the influence of photocatalytic activity on the stability of solid-state mequitazine, an H(1)-blocker, was investigated. The photo-degradation of mequitazine with TiO(2) occurred under irradiation with both light sources. The degree of degradation of mequitazine with anatase was higher than that of rutile. The degradation was significantly enhanced with increasing relative humidity. The relationship between the apparent degradation rate constant and water vapor pressure could be clearly described by a simple power law. The major photo-degradation products of mequitazine, resulting from photocatalytic activity of TiO(2), were mequitazine-S-oxide and mequitazine-sulphone. A remarkable degradation of mequitadine occurred with addition of TiO(2), and its photocatalytic activity was controlled by water vapor pressure. The photo-degradation of mequitazine with TiO(2) is a different process from mequitazine without TiO(2), because mequitazine-S-oxide and mequitazine-sulphone are not formed with normal photo-degradation of mequitazine.     

Rapid ruthenium-catalyzed synthesis of pyranopyrandiones by reconstructive carbonylation of cyclopropenones involving C[bond]C bond cleavage

Pyranopyrandiones were prepared by a novel ruthenium-catalyzed carbonylative dimerization of cyclopropenones via C-C bond cleavage. For example, treatment of dipropylcyclopropenone with a catalytic amount of Ru3(CO)12 and NEt3 in THF under 15 atm of carbon monoxide at 140 degrees C for 20 h gave a novel functional monomer, 3,4,7,8-tetrapropylpyrano[6,5-e]pyran-2,6-dione, in an isolated yield of 81%. Unsymmetrically substituted pyranopyrandiones were also obtained by ruthenium-catalyzed carbonylative coupling of cyclopropenones with alkynes under similar reaction conditions.     

Trifluoromethylated amino alcohols as chiral ligands for highly enantioselective Reformatsky reaction

The enantioselective Reformatsky reaction of PhCHO was achieved by the use of trifluoromethylated amino alcohols as chiral ligands to afford the corresponding optically active β-hydroxy ester with up to 90% ee.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Solid sampling technique for direct detection of condensed tannins in bark by matrix-assisted laser desorption/ionization mass spectrometry

A novel method for the direct analysis of condensed tannin components in bark was developed on the basis of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) combined with a simple solid sampling technique. The MALDI mass spectra obtained from the wood (bark) powder sample clearly showed a series of peaks corresponding to the sodium ion adducts of condensed tannin oligomers up to around m/z 3000. The results indicate that the condensed tannins in the bark sample used in this work mostly consist of combinations of flavan-3-ol units such as profisetinidin (PF), prorobinetinidin (PR) and prodelphinidin (PD), at least up to 10-mers (m/z approximately 3000).     

Studies directed towards the asymmetric total synthesis of antileukemic lignan lactones. Synthesis of optically pure key intermediate and its utility

By the self-immolative asymmetric synthesis, optically pure key intermediate β-piperonyl-γ-lactone (R)-(+)-$\text{6}$ was found to be prepared in reasonable yield from the easily available chiral γ-lactone synthon ($\text{1}$) which had been also reported to give an antipode (S)-(-)-$\text{6}$. The optically pure (R)-(+)-$\text{6}$ was shown to be converted successfully into several optically pure natural lignan lactones.     

Determination of nicotinic acid in serum by high-performance liquid chromatography with fluorescence detection

A sensitive method for the determination of nicotinic acid in serum is described which employs high-performance liquid chromatography with fluorescence detection. Nicotinic acid and 2-chloronicotinic acid as an internal standard in deproteinized serum are reacted with N,N'-dicyclohexyl-O-(7-methoxycoumarin-4-yl)methylisourea in acetone to give the corresponding fluorescent 4-hydroxymethyl-7-methoxycoumarin esters. The compounds are separated by reversed-phase chromatography on LiChrosorb RP-18 with isocratic elution using aqueous acetonitrile containing a small amount of sodium 1-hexanesulphonate as a mobile phase. The detection limit of nicotinic acid in serum was 0.2 nmol/ml. The method requires only 100 microliters of serum.     

Optimization of matrix-assisted laser desorption/ionization time-of-flight collision-induced dissociation using poly(ethylene glycol)

Details of the optimization of the collision-induced dissociation (CID) process, using a collision cell on a matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometer, are described using poly(ethylene glycol) 1000 (PEG 1000) as a model analyte. The effects of collision gas identity (helium, air, and argon), as well as collision gas pressure, on the resulting MS/MS data were investigated. With PEG 1000, helium was found to give the best results with respect to signal-to-noise (S/N) ratio. The optimum pressure for each gas was found to be in the range where the precursor ion signal was attenuated to approximately 30-50% for helium and 40-60% for argon. The effect of cation choice (Li, Na, and K) on the CID of PEG was also studied. CID spectra were produced for each, but PEG cationized with lithium was found to produce the spectra with the highest S/N ratio. The MALDI-TOF CID spectra that were generated for PEG were compared with the high-energy and low-energy MS/MS spectra obtained from a sector mass spectrometer and from a triple quadrupole mass spectrometer, respectively. The results observed for PEG confirm that CID on a MALDI-TOF mass spectrometer is a high-energy MS/MS technique.     

First asymmetric total synthesis of (+)-steganacin determination of absolute stereochemistry

(+)-Steganacin was synthesized in a new and highly specific asymmetric pathway based on the novel application of chiral γ-lactone as a chiral synthon. By this synthesis the absolute stereochemistry of natural (?)-steganacin could be determined in unequivocal way.     

Polymerization of methacrylates. I. Polymerization reactivity of picryl methacrylate

The polymerization of picryl (PMA), 2,4-dinitrophenyl (2,4-DNMA),2,6-dinitrophenyl (2,6-DNMA), 2-methyl-4,6-dinitrophenyl (MDNMA), and 2,6-dimethylphenyl methacrylates (DMMA) was carried out in benzene at 60°C. PMA, 2,6-DNMA, and MDNMA did not undergo radical homopolymerization, while 2,4-DNMA and DMMA did. The results suggest that the growing radical readily attacks the oxygen atom of the nitro group at the 2 position of the terminal phenyl group due to the steric effect of the substituent at the 6 position, resulting in chain termination. PMA formed a charge-transfer complex with 2-naphthyl methacrylate (NMA). The stoichiometric composition of this complex was shown to be 1:1 molar complex. PMA was readily copolymerized with NMA. The amount of solvent affected the composition of the copolymer obtained at a given same mole fraction in feed. The results suggest that charge-transfer interaction between the ester groups affects the copolymerization mechanism.