Electrical conduction mechanisms in amorphous GeTe thin films

A measurement of potential distribution was carried out on amorphous GeTe thin films at various applied voltages. The potential falls steeply near the anode. The results were consistently explained with the hypothesis that the free carriers which flow away from the regions near the cathode and the anode into the inner part of the sample are not replenished by injected carriers. An estimate was made of the density of space-charge and of the free carrier concentration as a function of position. The fact that the distributions of both the potential and the free carrier concentration are nonuniform indicate that the diffusion current cannot be neglected. In the steady state, the observed current density as a function of applied field agrees well with the predictions of a theoretical model that includes both diffusion and drift currents.     

All-Solid-State Rechargeable Air Batteries Using Dihydroxybenzoquinone and Its Polymer as the Negative Electrode

A proof-of-concept study was conducted on an all-solid-state rechargeable air battery (SSAB) using redox-active 2,5-dihydroxy-1,4-benzoquinone (DHBQ) and its polymer (PDBM) and a proton-conductive polymer (Nafion). DHBQ functioned well in the redox reaction with the solid Nafion ionomer at 0.47 and 0.57 V vs. RHE, similar to that in acid aqueous solution. The resulting air battery exhibited an open circuit voltage of 0.80 V and a discharge capacity of 29.7 mAh g_DHBQ⁻¹ at a constant current density (1 mA cm⁻²). With PDBM, the discharge capacity was much higher, 176.1 mAh g_PDBM⁻¹, because of the improved utilization of the redox-active moieties. In the rate characteristics of the SSAB-PDBM, the coulombic efficiency was 84 % at 4 C, which decreased to 66 % at 101 C. In a charge/discharge cycle test, the capacity remaining after 30 cycles was 44 %, which was able to be significantly improved, to 78 %, by tuning the Nafion composition in the negative electrode.     

Effects of graft densities and chain lengths on separation of bioactive compounds by nanolayered thermoresponsive polymer brush surfaces

We have prepared various poly(N-isopropylacrylamide) (PIPAAm)-grafted silica bead surfaces through surface-initiated atom transfer radical polymerization (ATRP) by changing graft densities and brush chain lengths. The prepared surfaces were characterized by chromatographic analysis using the modified silica beads as chromatographic stationary phases. ATRP initiator (2-(m,p-chloromethylphenyl)ethyltrichlorosilane) density on silica bead surfaces was modulated by changing the feed composition of the self-assembled monolayers (SAMs) of mixed silane coupling agents consisting of ATRP initiator and phenethyltrichlorosilane on the surfaces. IPAAm was then polymerized on SAM-modified silica bead surfaces by ATRP in 2-propanol at 25 degrees C. The chain length of the grafted PIPAAm was controlled by simply changing the ATRP reaction time at constant catalyst concentration. The thermoresponsive surface properties of the PIPAAm-grafted silica beads were investigated by temperature-dependent elution behavior of hydrophobic steroids from the surfaces using Milli-Q water as a mobile phase. On the surfaces grafted with shorter PIPAAm chains, longer retention times for steroids were observed on sparsely grafted PIPAAm surfaces compared to dense PIPAAm brushes at low temperature, because of hydrophobic interactions between the exposed phenethyl groups of SAMs on silica surfaces and steroid molecules. Retention times for steroids on dilute PIPAAm chain columns decreased with temperature similarly to conventional reverse-phase chromatographic modes on octadecyl columns. This effect was due to limited interaction of solutes with the PIPAAm-grafted surfaces. Retention times for steroids on dilute PIPAAm brush surfaces with longer PIPAAm chains became greater above the PIPAAm transition temperature. At low-temperature regions, hydrated and expanded PIPAAm at low temperatures prevented hydrophobic interactions between the phenethyl group of SAMs on the silica bead surfaces and steroid molecules. Retention times for steroids on a dense PIPAAm brush column increased with temperature since solvated polymer segments within the dense brush layer undergo dehydration over a broad range of temperatures. In conclusion, PIPAAm graft density has a crucial influence on the elution behavior of steroids because of the interaction of analytes with silica bead interfaces, and because of the characteristic dehydration of PIPAAm in dense-pack brush surfaces.     

Sequence-specific control of azobenzene assemblies by molecular recognition of DNA

We investigated the molecular recognition between the amphiphile AzoAde, which is composed of azobenzene in the hydrophobic and adenine in the hydrophilic portion of the molecule, and oligonucleotides having a homogeneous base (dA30, dT30, dG30, and dC30) at the air-water interface. On the basis of the complementary base-pairing of DNA in the duplex, orderly arrangement of AzoAde on templated dT30 was examined using pi-A isotherm, UV-vis RAS, FT-IR RAS, and XPS measurements. Although there was little interaction between AzoAde and mismatched oligonucleotides (dA30, dG30, and dC30), AzoAde prepared on a dT30 subphase stoichiometrically assembled and interacted with dT30, subsequently forming a J-form assembly at the air-water interface. AFM observation of the LB films revealed the nanostructure of the J-formed AzoAde monolayer on the dT30 subphase as well as the domain structures of the H-formed monolayers on the other oligonucleotide subphases. Therefore, dT30 has a potential application as a template for assembling AzoAde at the air-water interface.     

How does the mobility of phospholipid molecules at a water/oil interface reflect the viscosity of the surrounding oil?

The mobility of phospholipid molecules at a water/oil interface on cell-sized phospholipid-coated microdroplets was investigated through the measurement of diffusion constants by fluorescence recovery after photobleaching. It is found that the diffusion constant of phospholipids showed the relation D approximately (eta water + eta oil) -0.85, where D is the diffusion constant, eta water is the viscosity of water, and eta oil is the viscosity of oil. This observation indicates that the viscosity of the surrounding oil is the primary factor that determines the diffusibility of phospholipids at a water/oil interface.     

Preparation of pH-sensitive liposomes retaining SOD mimic and their anticancer effect

We prepared an anticancer drug based on a pH-sensitive liposome retaining Fe-porphyrin as an SOD mimic. The liposomes contained cationic/anionic lipid combinations and were composed of Fe-porphyrin, 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine, dimethylditetradecylammonium bromide, sodium oleate, and Tween-80. The Fe-porphyrin was released from the liposome at low pH, and the cytotoxicity for cancer cells by the liposome depended on the acidic environments of the endosomes in the cells. Furthermore, although the liposome exhibited an excellent anticancer effect on a gastric cancer cell line, the SOD activity of Fe-porphyrin was shown to have a significant influence on the cytotoxicity toward cancer cells. These findings suggest that the pH-sensitive liposome retaining the Fe-porphyrin as an SOD mimic promises to be a novel anticancer drug for endosomal escape.     

Nernstian adsorbate-like bulk layer of organic radical polymers for high-density charge storage purposes

Redox polymer layers with 2,2,6,6-tetramethylpiperidin-1-oxyl-4-yl (TEMPO) groups showed nernstian adsorbate-like electrochemical behaviors up to submicrometer thicknesses, based on a fast charge propagation within the bulk layer and persistency in electrolyte solutions.     

Determination of (R)-xanthoanthrafil, a phosphodiesterase-5 inhibitor, in a dietary supplement promoted for sexual enhancement

We describe here the first case of the finding of xanthoanthrafil, a phosphodiesterase-5 inhibitor, in a dietary supplement. A methanol extract of the supplement product was first analyzed by TLC and HPLC. The results indicated that the extract contained an unknown compound. The molecular weight of the compound was 389 and the accurate mass showed its elemental composition to be C(19)H(23)N(3)O(6). Combined with this data, NMR analysis revealed the planar structure of the unknown compound to be N-(3,4-dimethoxybenzyl)-2-(1-hydroxypropan-2-ylamino)-5-nitrobenzamide. The R-configuration of this compound had been synthesized as a phosphodiesterase-5 inhibitor, formerly reported as FR226807 by Fujisawa Pharmaceutical Co., Ltd. The absolute configuration of the isolated compound was estimated to have R-configuration by its optical rotation. Considering its general properties, this compound is renamed as (R)-xanthoanthrafil with the agreement of Astellas Pharma Inc. which is the successor of Fujisawa Pharmaceutical Co., Ltd. Quantitative analysis revealed that the content of (R)-xanthoanthrafil in the product was about 31 mg/capsule.     

Superionic Conduction in Co‐Vacant P2‐NaxCoO2 Created by Hydrogen Reductive Elimination

The layered P2‐Na_xMO₂ (M: transition metal) system has been widely recognized as electronic or mixed conductor. Here, we demonstrate that Co vacancies in P2‐Na_xCoO₂ created by hydrogen reductive elimination lead to an ionic conductivity of 0.045 S cm^?1 at 25 °C. Using in situ synchrotron X‐ray powder diffraction and Raman spectroscopy, the composition of the superionic conduction phase is evaluated to be Na_0.61(H₃O)_0.18Co_0.93O₂. Electromotive force measurements as well as molecular dynamics simulations indicate that the ion conducting species is proton rather than hydroxide ion. The fact that the Co‐stoichiometric compound Na_x(H₃O)_yCoO₂ does not exhibit any significant ionic conductivity proves that Co vacancies are essential for the occurrence of superionic conductivity.