Aggregation and solubility behavior of asphaltenes and their subfractions

Asphaltenes from four different crude oils (Arab Heavy, B6, Canadon Seco, and Hondo) were fractionated in mixtures of heptane and toluene and analyzed chemically, by vapor pressure osmometry (VPO), and by small angle neutron scattering (SANS). Solubility profiles of the asphaltenes and their subfractions indicated strong cooperative asphaltene interactions of a particular subfraction that is polar and hydrogen bonding. This subfraction had lower H/C ratios and modestly higher N, V, Ni, and Fe contents than the less polar and more soluble subfraction of asphaltenes. VPO and SANS studies indicated that the less soluble subfractions formed aggregates that were considerably larger than the more soluble subfractions. In general, asphaltene aggregate size increased with decreasing solvent aromaticity up to the solubility limit, beyond which the aggregate size decreased with heptane addition. The presence of a low wavevector Q feature in the scattering curves at 25 degrees C indicated that the individual aggregates were flocculating; however, the intensity of the feature was diminished upon heating of the samples to 80 degrees C. The solubility mechanism for Canadon Seco asphaltenes, the largest aggregate formers, appears to be dominated by aromatic pi-bonding interactions due to their low H/C ratio and low nitrogen content. B6 and Hondo asphaltenes formed similar-sized aggregates in heptol and the solubility mechanism is most likely driven by polar interactions due to their relatively high H/C ratios and high nitrogen contents. Arab Heavy, the least polar asphaltene, had a H/C ratio similar to Canadon Seco but formed the smallest aggregates in heptol. The enhancement in polar and pi-bonding interactions for the less soluble subfraction indicated by elemental analysis is reflected by the aggregate size from SANS. The less soluble asphaltenes contribute the majority of species responsible for aggregation and likely cause many petroleum production problems such as pipeline deposition and water-in-oil emulsion stabilization.     

P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

An investigation into the construction of molecular models by the template joining method

Summary The results of a wide-ranging investigation into some of the different methods available for performing the joining of templates to build molecular models show that the choice of algorithm can significantly affect the quality of the results obtained, and different algorithms are most suited to particular categories of join.     

Asymmetric epoxidation using a singly-bound supported Katsuki-type (salen)Mn complex

We have successfully prepared an unsymmetrical analogue of a Katsuki-type salen ligand having a single hydroxyalkyl group at its 6-position, and also its Mn(III) complex; attachment of the complex to a polymer gives a highly enantioselective and recoverable catalyst for epoxidation of 1,2-dihydronaphthalene.     

Lithiation of 2-Alkyl-3-amino- and 2-Alkyl-3-(methylamino)-4(3H)-quinazolinones(1)

3-Amino-2-methyl-4(3H)-quinazolinone has been doubly lithiated, on nitrogen and in the 2-methyl group, with n-butyllithium. The lithium reagent thus obtained reacts with a variety of electrophiles (D(2)O, benzophenone, cyclohexanone, cyclopentanone, acetophenone, benzaldehyde, tetraisopropylthiuram disulfide (TITD)) to give the corresponding 2-substituted derivatives in very good yields. Reactions of the dilithio reagent with 2 molar equiv of methyl iodide or phenyl isocyanate give disubstituted derivatives. Double lithiation of the 2-ethyl and 2-propyl analogues have been achieved using LDA, and subsequent reactions with most electophiles are then similar. In the reaction of the dianion of the 2-ethyl compound with TITD, deamination from position 3 takes place with the formation of the 2-substituted derivative. In reactions with prochiral ketones, the dianion of the 2-ethyl compound gives very high diastereoselectivity. Lithiation and subsequent reactions of 3-(methylamino) analogues take place in a similar manner, thus providing access to a range of substituted 3-(methylamino)-2-alkyl-4(3H)-quinazolinones by a general procedure. Lithiation of 3-(dimethylamino)-2-ethyl-4(3H)-quinazolinone did not take place under similar conditions. Lithiation of 3-amino-2-unsubstituted-4(3H)-quinazolinone was also unsuccessful.     

Investigating bidentate and tridentate carbamoylmethylphosphine oxide ligand interactions with rare-Earth elements using electrospray ionization quadrupole ion trap mass spectrometry

Electrospray ionization (ESI) quadrupole ion trap mass spectrometry (QIT-MS) and collisionally activated dissociation (CAD) were used to evaluate the rare-earth binding properties of two hydrophobic carbamoylmethylphosphine oxide (CMPO) ligands, the normal bidentate variety, (t-BuC6H4)2P(O)CH2C(O)N(i-Bu)2 (A), a new potentially tridentate extractant, (t-BuC6H4)2P(O)CH[CH2C(O)N(i-Bu)2]C(O)N(i-Bu)2 (B), and tributyl phosphate. The mass spectral results obtained from analysis of 1% HNO3/methanol solution containing the ligands and dissolved lanthanide salts reveal that the favorable stoichiometries of the ligand/metal/nitrate complexes are 2:1:2 for the bidentate ligand A, 1:1:2 for the tridentate ligand B, and 3:1:2 for the monodentate tributyl phosphate. These observed stoichiometries correlate with the number of available binding sites on each ligand as well as with potential steric effects. Energy-variable collisionally activated dissociation experiments showed that for the 2:1:2 complexes involving ligand A or B, as the ionic radius of the bound metal decreased, the removal of nitric acid required less energy and resulted in less extensive spontaneous solvent coordination. This experimental trend suggests that, as the ionic radius of the lanthanide ion decreases, a pair of the carbamoylmethylphosphine ligands is able to more completely solvate the bound metal ion thereby weakening the nitrate-metal interaction.     

Theoretical Definition of a Functional Group and the Molecular Orbital Paradigm

It is the purpose of this review to demonstrate that the empirical classification of the observations of chemistry in terms of the properties assigned to functional groups is a consequence of and is predicted by physics. This is accomplished by showing that the atoms and functional groups of chemistry can be identified with bounded space-filling objects whose properties are defined by quantum mechanics. The quantum mechanical definition of a group is combined with a new pictorial representation of its form to obtain a unified picture which should make it eminently recognizable to chemists. This picture, when combined with the demonstrated ability of these groups to recover the measured properties of atoms in molecules, is offered as one which meets the expectations a chemist associates with the concept of a functional group. The manner in which this physical definition of a group differs fundamentally from models of functional groups based upon molecular orbital theory is discussed.     

Analysis of pseudopartial and partial wetting of various substrates by lead

Lead drops exhibit partial wetting on some substrates and pseudopartial wetting on others. In pseudopartial wetting, a film is in equilibrium with a capillary body with a nonzero contact angle. Using a free energy formulation appropriate for the experiments, we show the conditions under which minimization of the system energy is accurately achieved by minimizing the energy of the film alone. Using a set of simple surface energy isotherms, we explain the various wetting behaviors of lead. We contrast isotherms for autophobing systems and the metallic systems considered here.     

Picosecond acoustic transmission measurements. II. Probing high frequency structural relaxation in supercooled glycerol

The high frequency acoustic response of liquids is measured in a manner directly analogous to conventional ultrasonic measurements. Two thin metal films act as acoustic transducer and receiver for a liquid layer between them. Pulsed optical excitation generates high bandwidth wave packets in the transducer, and these are detected in the receiver after damping and dispersion by the liquid. This initial measurement probes structural relaxation dynamics of glycerol in the frequency range 2-20 GHz, for temperatures between 235 and 291 K. The analysis presented here demonstrates the presence of excess relaxation, not accounted for by either the alpha or beta relaxation of the mode-coupling theory, and suggests the presence of constant loss in the susceptibility spectrum of supercooled glycerol.     

The magnetic susceptibilities of cobaltocene and chromocene

The magnetic susceptibilities of cobaltocene and chromocene have been measured between 83 and 293 K; for cobaltocene the results suggest an appreciable orthorhombic splitting of the ²∏(σ²πδ⁴ ground state, whilst for chromocene the data provide further support for the ³Δ(σδ³) ground state previously deduced.