Botryoidal assembly of cholesteryl-pullulan/poly(N-isopropylacrylamide) nanogels

Hybrid nanogels consisting of cholesteryl-modified pullulan (CHP) and poly(N-isopropylacrylamide) (PNIPAM) were synthesized by graft free-radical copolymerization of N-isopropylacrylamide (NIPAM) onto methacryloyl-substituted CHP nanogels (CHPMA) in water at 50 degrees C in the presence of a water-soluble free radical initiator. Depending on the initial NIPAM/CHPMA ratio, CHP-PNIPAM (CN) nanogels containing 30.8-84.8 wt % PNIPAM were obtained in the form of self-assembled nanoparticles with a hydrodynamic radius (Rh) of 69.0-116.0 nm in water kept at 20 degrees C. Hybrid nanogels of sufficiently high NIPAM content, such as the sample CN90, which contains 79.6 wt % NIPAM, exhibited a two-step response to changes in solution (3 mg/mL) temperature: a decrease in Rh from 93 to 57 nm as the temperature increased from 20 to 35 degrees C, followed by a sharp increase in Rh from 57 nm to 90 nm at 55 degrees C. Both steps in this temperature response were reversible. The multistep response to temperature of the CN nanogels was attributed to the morphology of the nanogels, which are seen as consisting of grape-like (botryoidal) clusters of associated native nanogels held together via cholesteryl cross-linking points and held together by the grafted PNIPAM chains.     

Photoluminescence modification in 3D-ordered films of fluorescent microspheres

3D-ordered latex films made of fluorescent microspheres were fabricated by sonication-assisted casting. Angle-dependent changes of photoluminescent (PL) emission were observed for the as-prepared fluorescent latex films with diameter of 200 nm. The PL emission at 483 and 512 nm was enhanced when they were near the edge of the stop band, and the suppression of PL emission was observed at 483 and 512 nm when they were located in the stop band. Resonance enhancement of PL emission was observed at 512 nm for the latex film with latex diameter of 1011 nm, in which the fluorescent sphere acted as both active emitting source and resonance microcavity.     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Highly stereoselective construction of 4,6-cis-substituted quinolizidine ring core: an application to enantioselective total synthesis of the marine alkaloid clavepictines A, B and pictamine

The enantioselective total synthesis of the marine alkaloids clavepictines A, B and pictamine has been achieved through the highly stereocontrolled quinolizidine ring closure of the conformationally constrained piperidine ring system (2), which bears the chiral centers and appropriate functionality needed for the synthesis of target alkaloids. The absolute stereochemistry of clavepictines and pictamine was verified to be 3R, 4S, 6S, 9aS by the present synthesis.     

Improvement of Ni/SDC anode by alkaline earth metal oxide addition for direct methane–solid oxide fuel cells

The anodic performances of Ni/CeO₂–Sm₂O₃(Ni/SDC) modified by the addition of alkaline earth metal oxides (MgO, CaO, and SrO) were investigated for direct oxidation of CH₄ in solid oxide fuel cells (SOFCs). Although the initial power density of cell with Ni/SDC anode modified by the addition of CaO was slightly lower than that of cell with Ni/SDC, the former anode exhibited an excellent stability compared to the latter one. Such a high stability of Ni–CaO/SDC anode may come from the inhibition of carbon deposition in addition to the retained ionic conductivity of anode.     

Self‐Assembled Nanogel of Hydrophobized Dendritic Dextrin for Protein Delivery

Highly branched cyclic dextrin derivatives (CH‐CDex) that are partly substituted with cholesterol groups have been synthesized. The CH‐CDex forms monodisperse and stable nanogels with a hydrodynamic radii of ≈10 nm by the self‐assembly of 4–6 CH‐CDex macromolecules in water. The CH‐CDex nanogels spontaneously trap 10–16 molecules of fluorescein isothiocyanate‐labeled insulin (FITC‐Ins). The complex shows high colloidal stability: no dissociation of trapped insulin is observed after at least 1 month in phosphate buffer (0.1 M , pH 8.0). In the presence of bovine serum albumin (BSA, 50 mg · mL^?1), which is a model blood system, the FITC‐Ins trapped in the nanogels is continuously released (≈20% at 12 h) without burst release. The high‐density nanogel structure derived from the highly branched CDex significantly affects the stability of the nanogel–protein complex.

     

Dicarboxylic degradation products of nonylphenol polyethoxylates. Determination and structural elucidation in water samples by solid-phase extraction and gas chromatography-mass spectrometry after methylation

A reliable method combining solid-phase extraction, derivatization and gas chromatography-chemical ionization mass spectrometry (GC-CI-MS) was developed for the measurement, in river and sewage effluent water, of four select model compounds of dicarboxylic metabolites (dm-CA(5-8)P1EC) and other dicarboxylic metabolites (CA(5-8)P1ECs) of nonylphenol polyethoxylates. These selected isomers were referred as dm-CA(5-8)P1ECs because they have an alpha,alpha-dimethyl configuration (expressed as "dm"), five to eight C atoms and a carboxyl group in the alkyl chain, and an ethoxy acetic acid group. The derivatization of terminal carboxyl groups was successful with (trimethylsilyl)diazomethane. The best extraction conditions were obtained using an Oasis HLB cartridge as a sorbent bed and 4 ml of MTBE/methanol (9:1, v/v) elution mixture. The method detection limits of 0.03-0.07 microg/l for dm-CA(5-8)P1ECs were attained in 500 ml pure water. The recovery was then evaluated for pure water, river and sewage effluent water samples. The high recoveries of typically >89% for each isomer indicated the high performance of the method. Although dm-CA(5-8)P1ECs were not detected in the collected water samples, 21 isomers of CA(5-8)P1ECs were identified by CI-MS and the tentative structures of six out of them were elucidated, mainly limited to the branch at alpha-C atom, by studying the EI-mass spectra. The relative concentrations of individual CA(5-8)P1EC metabolites were calculated based on dm-CA(5-8)P1ECs. The results showed that the main degradation on the nonyl chain occurred via the elimination of two carbon-units and the concentrations in Japan were much lower than those in Taiwan and Italy.     

Substrate specificity of fluoroacetate dehalogenase: an insight from crystallographic analysis, fluorescence spectroscopy, and theoretical computations

The high substrate specificity of fluoroacetate dehalogenase was explored by using crystallographic analysis, fluorescence spectroscopy, and theoretical computations. A crystal structure for the Asp104Ala mutant of the enzyme from Burkholderia sp. FA1 complexed with fluoroacetate was determined at 1.2 ? resolution. The orientation and conformation of bound fluoroacetate is different from those in the crystal structure of the corresponding Asp110Asn mutant of the enzyme from Rhodopseudomonas palustris CGA009 reported recently (J. Am. Chem. Soc. 2011, 133, 7461). The fluorescence of the tryptophan residues of the wild-type and Trp150Phe mutant enzymes from Burkholderia sp. FA1 incubated with fluoroacetate and chloroacetate was measured to gain information on the environment of the tryptophan residues. The environments of the tryptophan residues were found to be different between the fluoroacetate- and chloroacetate-bound enzymes; this would come from different binding modes of these two substrates in the active site. Docking simulations and QM/MM optimizations were performed to predict favorable conformations and orientations of the substrates. The F atom of the substrate is oriented toward Arg108 in the most stable enzyme-fluoroacetate complex. This is a stable but unreactive conformation, in which the small O-C-F angle is not suitable for the S(N)2 displacement of the F(-) ion. The cleavage of the C-F bond is initiated by the conformational change of the substrate to a near attack conformation (NAC) in the active site. The second lowest energy conformation is appropriate for NAC; the C-O distance and the O-C-F angle are reasonable for the S(N) 2 reaction. The activation energy is greatly reduced in this conformation because of three hydrogen bonds between the leaving F atom and surrounding amino acid residues. Chloroacetate cannot reach the reactive conformation, due to the longer C-Cl bond; this results in an increase of the activation energy despite the weaker C-Cl bond.     

Injectable Hydrogel for Sustained Protein Release by Salt‐Induced Association of Hyaluronic Acid Nanogel

A hyaluronic acid‐based anionic nanogel formed by self‐assembly of cholesteryl‐group‐bearing HA is designed for protein delivery. The HA nanogel spontaneously binds various types of proteins without denaturation, such as recombinant human growth hormone, erythropoietin, exendin‐4, and lysozyme. The HA nanogel shows unique colloidal properties, in particular that an injectable hydrogel is formed by salt‐induced association of the HA nanogel. A pharmacokinetic study in rats shows that an in situ gel formulation, prepared by simply mixing rhGH and HA nanogel in phosphate buffer, maintains plasma rhGH levels within a narrow range over one week. Therefore, HA nanogels offer a simple method for easy formulation of therapeutic proteins and are effective for sustained protein release systems.