Direct Transformation of Molecular Dinitrogen into Ammonia Catalyzed by Cobalt Dinitrogen Complexes Bearing Anionic PNP Pincer Ligands

The direct formation of ammonia from molecular dinitrogen under mild reaction conditions was achieved by using new cobalt dinitrogen complexes bearing an anionic PNP‐type pincer ligand. Up to 15.9 equivalents of ammonia were produced based on the amount of catalyst together with 1.0 equivalent of hydrazine (17.9 equiv of fixed nitrogen atoms).     

Nickel‐ and Photoredox‐Catalyzed Cross‐Coupling Reactions of Aryl Halides with 4‐Alkyl‐1,4‐dihydropyridines as Formal Nucleophilic Alkylation Reagents

A combination of nickel and photoredox catalysts promoted novel cross‐coupling reactions of aryl halides with 4‐alkyl‐1,4‐dihydropyridines. 4‐Alkyl‐1,4‐dihydropyridines act as formal nucleophilic alkylation reagents through a photoredox‐catalyzed carbon–carbon (C?C) bond‐cleavage process. The present strategy provides an alternative to classical carbon‐centered nucleophiles, such as organometallic reagents.     

Thermally Induced Intra‐Carboxyl Proton Shuttle in a Molecular Rack‐and‐Pinion Cascade Achieving Macroscopic Crystal Deformation

Proton transport via dynamic molecules is ubiquitous in chemistry and biology. However, its use as a switching mechanism for properties in functional molecular assemblies is far less common. In this study, we demonstrate how an intra‐carboxyl proton shuttle can be generated in a molecular assembly akin to a rack‐and‐pinion cascade via a thermally induced single‐crystal‐to‐single‐crystal phase transition. In a triply interpenetrated supramolecular organic framework (SOF), a 4,4′‐azopyridine (azpy) molecule connects to two biphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄BPTC) molecules to form a functional molecular system with switchable mechanical properties. A temperature change reversibly triggers a molecular movement akin to a rack‐and‐pinion cascade, which mainly involves 1) an intra‐carboxyl proton shuttle coupled with tilting of the azo molecules and azo pedal motion and 2) H₄BPTC translation. Moreover, both the molecular motions are collective, and being propagated across the entire framework, leading to a macroscopic crystal expansion and contraction.     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Photoluminescence modification in 3D-ordered films of fluorescent microspheres

3D-ordered latex films made of fluorescent microspheres were fabricated by sonication-assisted casting. Angle-dependent changes of photoluminescent (PL) emission were observed for the as-prepared fluorescent latex films with diameter of 200 nm. The PL emission at 483 and 512 nm was enhanced when they were near the edge of the stop band, and the suppression of PL emission was observed at 483 and 512 nm when they were located in the stop band. Resonance enhancement of PL emission was observed at 512 nm for the latex film with latex diameter of 1011 nm, in which the fluorescent sphere acted as both active emitting source and resonance microcavity.     

Dicarboxylic degradation products of nonylphenol polyethoxylates. Determination and structural elucidation in water samples by solid-phase extraction and gas chromatography-mass spectrometry after methylation

A reliable method combining solid-phase extraction, derivatization and gas chromatography-chemical ionization mass spectrometry (GC-CI-MS) was developed for the measurement, in river and sewage effluent water, of four select model compounds of dicarboxylic metabolites (dm-CA(5-8)P1EC) and other dicarboxylic metabolites (CA(5-8)P1ECs) of nonylphenol polyethoxylates. These selected isomers were referred as dm-CA(5-8)P1ECs because they have an alpha,alpha-dimethyl configuration (expressed as "dm"), five to eight C atoms and a carboxyl group in the alkyl chain, and an ethoxy acetic acid group. The derivatization of terminal carboxyl groups was successful with (trimethylsilyl)diazomethane. The best extraction conditions were obtained using an Oasis HLB cartridge as a sorbent bed and 4 ml of MTBE/methanol (9:1, v/v) elution mixture. The method detection limits of 0.03-0.07 microg/l for dm-CA(5-8)P1ECs were attained in 500 ml pure water. The recovery was then evaluated for pure water, river and sewage effluent water samples. The high recoveries of typically >89% for each isomer indicated the high performance of the method. Although dm-CA(5-8)P1ECs were not detected in the collected water samples, 21 isomers of CA(5-8)P1ECs were identified by CI-MS and the tentative structures of six out of them were elucidated, mainly limited to the branch at alpha-C atom, by studying the EI-mass spectra. The relative concentrations of individual CA(5-8)P1EC metabolites were calculated based on dm-CA(5-8)P1ECs. The results showed that the main degradation on the nonyl chain occurred via the elimination of two carbon-units and the concentrations in Japan were much lower than those in Taiwan and Italy.     

Pentamethylcyclopentadienide in organic synthesis: nucleophilic addition of lithium pentamethylcyclopentadienide to aromatic aldehydes and carbon-carbon bond cleavage of the adducts affording the parent aldehydes

Treatment of aromatic aldehyde with lithium pentamethylcyclopentadienide provided the corresponding carbinol in excellent yield. The carbinol returns to the parent aldehyde and pentamethylcyclopentadiene upon exposure to an acid or due to heating. The combination of the two reactions can represent a protection of aromatic aldehyde.     

Theoretical study of the mechanism of valence tautomerism in cobalt complexes

Valence tautomerism is studied in the [Co(II-HS)(sq)(2)(bpy)]/[Co(III-LS)(sq)(cat)(bpy)] mononuclear cobalt complex by using DFT methods (HS, high spin; LS, low spin; cat, catecholate; sq, semiquinone; bpy, 2,2'-bipyridine). Calculations at the B3LYP* level of theory reproduce well the energy gap between the Co(II-HS) and Co(III-LS) forms giving an energy gap of 4.4 kcal/mol, which is comparable to the experimental value of 8.9 kcal/mol. Potential energy surfaces and crossing seams of the electronic states of the doublet, quartet, and sextet spin states are calculated along minimum energy paths connecting the energy minima corresponding to the different spin states. The calculated minimum energy crossing points (MECPs) are located at 8.8 kcal/mol in the doublet/sextet surfaces, at 10.2 kcal/mol in the doublet/quartet surfaces, and at 8.4 kcal/mol in the quartet/sextet surfaces relative to the doublet ground state. Considering the energy of the three spin states and the crossing points, the one-step relaxation mechanism between the Co(II-HS) and Co(III-LS) forms is the most probable. This research shows that mapping MECPs can be a useful strategy to analyze the potential energy surfaces of systems with complex deformation modes.     

In-situ observations of dissolution process of GaSb into InSb melt by X-ray penetration method

Dissolution process of GaSb into InSb melt was observed by an X-ray penetration method. The intensity of X-rays penetrated through the rectangular shaped GaSb (seed)/InSb/GaSb (feed) sandwich sample was recorded by the CdTe line sensor detector. The penetrated X-ray intensities and images of the sample were obtained as a function of time and temperature. The gallium (Ga) composition profile of the sample was calculated as a function of time by making the calibration line with the penetrated X-ray intensities of GaSb and InSb standard samples. The calculated Ga composition profile of the grown sample agreed well with the data measured by energy dispersive X-ray spectroscopy analysis. The result suggested that lower GaSb seed dissolved faster than upper GaSb feed despite of the low temperature at the lower GaSb seed. It clearly indicates that the solutal transport induced by gravity strongly affects the dissolution process.