Structure of a 1:1 molecular complex of trans-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene with ethanol

X-ray analysis of the title complex revealed hydrogen-bonded chains comprising two crystallographically independent types of $\text{trans}$-9,10-dihydroxy-9,10-diphenyl-9,10-dihydroanthracene molecules, in which the central 1,4-cyclohexadiene rings are respectively flat and very slightly puckered, with the ethanol molecules attached exclusively to the latter type.     

Highly regio- and stereoselective hydrometallation reactions of fluorine-containing internal alkynes: Novel approaches to fluoroalkylated alkenes

Hydroalumination, hydrocupration, and hydroboration reactions of various fluorine-containing alkynes were investigated. The alkyne reacted smoothly with 2.0 equiv. of Red-Al at −78 °C to give the hydroaluminated adduct in a highly regio- and stereoselective manner, which was treated with iodine, the corresponding vinyliodide being produced in moderate yield. Hydrocupration of the alkynes also took place, but the resulting vinylmetal reacted with various electrophiles sluggishly. In sharp contrast, the reaction with dicyclohexylborane proceeded smoothly to afford the cis-addition products preferentially, which were subjected to Suzuki-Miyaura cross-coupling reaction, leading to trisubstituted alkenes in high yields.     

Elongation and contraction of molecular springs. Synthesis, structures, and properties of bridged [7]thiaheterohelicenes

A series of bridged [7]thiaheterohelicenes 3a-c and 4 with a variety of helical pitches have been prepared from racemic and optical pure 2,13-bis(hydroxymethyl)dithieno[3,2-e:3',2'-e']benzo[1,2-b:4,3-b']bis[1]benzothiophene (1) in order to investigate the helical structures in solution. Recrystallizations of (PM)-3a, (PM)-3b, (PM)-3c, and (P)-4 from hexane-dichloromethane gave crystals suitable for X-ray crystallography, while recrystallization of (PM)-4 with benzene gave an inclusion complex with a stoichiometry of (PM-4)(4).(C(6)H(6)). X-ray analyses of (PM)-3a-c, (PM-4)(4).(C(6)H(6)), and (P)-4 indicate that the dihedral angles between terminal thiophene rings of the helical framework significantly vary from 22 degrees for 4 to 59 degrees for 3c. This represents as increase of 37 degrees or 168%. Although the (13)C NMR and UV absorption spectra of bridged helicenes 3a-c and unbridged helicene 5 are essentially the same, the molar rotation of 5 is very large compared with those of 3a-c and 4. A red shift (15 nm) in the circular dichroism (CD) spectrum is observed for 4, suggesting that this compound is more planar than 3a-c in solution. In the series of [7]thiaheterohelicenes studied, the minimum helical pitch is 2.70 A for 4.     

Loss and recovery in hydrophobicity of silicone rubber exposed to corona discharge

This paper describes the loss and recovery in the hydrophobicity of unfilled high temperature vulcanized silicone rubber (HTV-SR) resulting from corona discharge. In this study, HTV-SR specimens were exposed to corona stress generated by a parallel needle-plane electrode system, and physicochemical analyses on the surface layer of SR before and after corona discharge treatment were carried out by using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It is demonstrated that hydrophilic OH groups that are by-products of ageing can be formed instead of hydrophobic CH₃ groups on the surface of aged SR and the corona discharge plays an important role on the temporary loss of hydrophobicity. After a substantial period of ‘rest’, the hydrophobic recovery of SR results from the diffusion of low-molecular weight (LMW) silicone fluid from the bulk onto the aged layer.     

Thermal decomposition of vinylacetylene in shock waves

The thermal decomposition of vinylacetylene (C₄H₄) was studied behind reflected shock waves using both a single-pulse method (reaction time between 0.8 and 3.3 ms) and a time-resolved UV-absorption method (230 nm). The studies were done over the temperature range of 1170–1690 K at the total pressure range of 1.3–2.3 atm. The mechanism was used to interpret both the early and late stages of vinylacetylene decomposition at the high temperatures. It was confirmed that C₄H₄ dissociation proceeded through the following three channels. The rate constant expression of reaction (1) was determined as k₁ = 6.3 × 10¹³ exp(?87.1 kcal/RT) s^?1. The rate constants of the succeeding reactions (chain reaction, C₄H₄ + H → i-C₄H₃ + H₂ and C₄H₄ + H → C₂H₂ + C₂H₃ and decomposition reactions of free radicals, i-C₄H₃ + M → C₄H₂ + H + M) were confirmed or estimated. © John Wiley & Sons, Inc.     

Electrodeposition of manganese and molybdenum mixed oxide thin films and their charge storage properties

Manganese and molybdenum mixed oxides in a thin film form were deposited anodically on a platinum substrate by cycling the electrode potential between 0 and +1.0 V vs Ag/AgCl in aqueous manganese(II) solutions containing molybdate anion (MoO(4)2-). A possible mechanism for the film formation is as follows. First, electrooxidation of Mn2+ ions with H2O yields Mn oxide and protons. Then, the protons being accumulated near the electrode surface react with MoO(4)2- to form polyoxomolybdate through a dehydrated condensation reaction (by protonation and dehydration). The condensed product coprecipitates with the Mn oxide. Cyclic voltammetry of the Mn/Mo oxide film-coated electrode in aqueous 0.5 M Na2SO4 solution exhibited a pseudocapacitive behavior with higher capacitance and better rate capability than that of the pure Mn oxide prepared similarly, most likely as a result of an increase in electrical conductivity of the film. Electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy clearly demonstrated that the observed pseudocapacitive behavior results from reversible extraction/insertion of hydrated protons to balance the charge upon oxidation/reduction of Mn3+/Mn4+ in the film.     

Aryloxyacetic acid diuretics with uricosuric activity. II. Substituted [(4-oxo-4H-1-benzopyran-7-yl)oxy]acetic acids and the related compounds.

Di- and tri-substituted [(4-oxo-4H-1-benzopyran-7-yl)oxy]acetic acids, and 4-oxo-3-phenyl-4H-furo[2,3-h]-[1]benzopyran-8-carboxylic acid were synthesized and tested for natriuretic and uricosuric activities. Among the compounds tested, 3,5-disubstituted [(4-oxo-4H-1-benzopyran-7-yl)oxy]acetic acids (6c-f, h, n and x) showed potent natriuretic and uricosuric activities, whereas 4-oxo-3-phenyl-4H-furo[2,3-h][1]benzopyran-8-carboxylic acid (6dd) possessed only potent natriuretic activity. The structure-activity relationships are also discussed.     

Studies on furan derivatives. XII. Nucleophilic substitution of methyl 5-nitro-2-furancarboxylate. Preparation of methyl 5-phenoxy-2-furancarboxylates

Twenty one methyl 5-phenoxy-2-furancarboxylates prepared from the reaction of methyl 5-nitro-2-furan-carboxylate with phenoxides via displacement of the nitro group. In the reaction of potassium 2-nitrophen-oxide with methyl 5-nitro-2-furancarboxylate at 110°-120°, 2,2′-dinitrodiphenyl ether was obtained as a main product.     

GENERATION AND PARTICIPATION OF O-2 IN 2-NITROPROPANE DIOXYGENASE REACTION

Abstract— 2-Nitropropane dioxygenase (EC 1. 13. 11) of the yeast Hansenula mrakii catalyzes the oxygenative denitrification of 2-nitropropane as follows:

The enzyme is significantly inhibited by superoxide dismutase and various scavengers for superoxide such as cytochrome c , epinephrine, thiols and polyhydric phenols. The scavengers added to the reaction mixture were oxidized or reduced. The addition of superoxide dismutase and the omission of 2-nitropropane or oxygen prevented the oxidation and the reduction of the scavengers. The enzyme catalyzes the formation of nitrite from 2-nitropropane by KO₂ added anaerobically.
One mole of NADH is bound per mole of the enzyme and predominantly the pro-R hydrogen of bound NADH is transferred to superoxide formed enzymatically or provided externally. The enzyme shows incomplete stereospecificity for hydrogen transfer from NADH.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.