Studies on the Chelation of Cyclodiphosph(V)azane Complexes of Co(II), Ni(II), Cu(II), and Pd(II): Preparation,Characterization, Thermal,Solid State Electrical Conductivity,and Biological Activity Studies

Cyclodiphosph(V)azane of chromene, (1,3-diphenyl-2,4-bis(3-amino-9-methoxy1-tolyl-3H-benzo[f]chromene-2-carbonitrile)-2,2,4,4-tetrachlorocyclodiphosph(V)azane (III), reacts with stoichiometric amounts of transition metal salts such as Co(II), Ni(II), Cu(II), and Pd(II) to afford colored complexes in a moderate to high yield. The structure of the isolated complexes was suggested based on elemental analyses, IR, molar conductance, UV-Vis, ¹H, ¹³C, and ³¹P-NMR, magnetic susceptibility measurements, and dark electrical conductivity of solid state from room temperature up to 450 K. The complexes have been investigated in solution by spectrophotometric molar ratio and conductometric methods. Kinetic and thermodynamic parameters were computed from the thermal decomposition data using the Coats and Redfern method. The prepared complexes showed high to moderate bactericidal activity compared with the ligand.     

Magnetization of Fe‐oxide based nanocomposite tuned by surface charging

Aiming at a voltage‐control of magnetism, the magnetization of a porous γ‐Fe₂O₃–Pt nanocomposite is studied under the influence of charging the surfaces of the porous structure in an electrolyte. Reversible variations of the magnetization of up to 10.4% could be achieved upon charging in the regime where electrochemical adsorption and desorption occurs. The observed variation of the magnetization with electrochemical charging is assigned to the γ‐Fe₂O₃ nanoparticles whereas the conductive network of Pt nanoparticles is necessary for charging. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of water-soluble magnetic nanocrystals using aryl diazonium salt chemistry

A novel and facile methodology for the in situ surface functionalization of Fe(3)O(4) nanoparticles is proposed, based on the use of aryl diazonium salts chemistry. The grafting reaction involves the formation of diazoates in a basic medium. These species are unstable and dediazonize along a homolytic pathway to give aryl radicals which further react with the Fe(3)O(4) NPs during their formation and stop their growth. Advantages of the present approach rely not only on the simplicity, rapidity, and efficiency of the procedure but also on the formation of strong Fe(3)O(4)-aryl surface bonds, highly suitable for further applications.     

Isolation and characterization of novel antibacterial compound from an untapped plant,Stereospermum fimbriatum

Abstract

Stereospermum fimbriatum or locally known as “Chicha” is traditionally used for itchy skin, earache, stomachache and postpartum treatments. This study was designed to evaluate the antimicrobial potential of S. fimbriatum’s stem bark against 11 pathogens and isolate its bioactive compound. Successive soxhlet extraction was conducted using n-hexane, dichloromethane (DCM) and methanol. Disc diffusion, minimum inhibitory and bactericidal concentration (MIC & MBC) assays were done to examine the antimicrobial activity. Bioassay-guided isolation was conducted on S. fimbriatum’s extract. The DCM extract of stem bark (DS) was the most potent extract followed by n-hexane extract of the stem bark (NS). A novel compound was isolated and coded as C1 which demonstrated potent antibacterial effects with the MIC values as low as 3.13?µg/mL to 6.25?µg/mL, against S. epidermidis, MRSA and S. aureus. Thus, S. fimbriatum could be a potential source of antimicrobial agents for the treatment of skin infections, specifically, MRSA.     

Chemical Composition,Antioxidant, and Antimicrobial Activities of Leaves of Ajuga Iva

The main objective of this research was to study the biological characteristics in terms of antioxidant and antimicrobial activities of Ajuga iva and determine the best analytical and extraction methods applicable to this specie and studied compounds. A short screening of its nutritional value in terms of chemical composition is also included. A. iva leaves were analyzed for crude protein (CP), cell wall [neutral detergent fiber (NDF), acid detergent fiber (ADF), and acid detergent lignin (ADL)], minerals, fatty acids, essential oils, and phenolic compounds. Mature aerial parts of A. iva were randomly collected during the Spring season from Mograne-Zaghouan, Tunisia. Leaves of A. iva contained 13.4 ± 0.4% CP, 26.3 ± 0.35% NDF, 20.2 ± 0.42% ADF, and 5.13 ± 0.21% ADL. Mineral content (13.0 ± 0.45%) was mainly composed of potassium (4.5% g DM) and magnesium (4.25% DM). Leaves of A. iva had linolenic (26.29 ± 0.760%) and linoleic (37.66 ± 2.35%) acids as the main components of the acid profile. Thymol was found to be the most dominant (23.43%) essential oil, followed by 4-vinylguaiacol (14.27%) and linalool (13.66%). HPLC-PDA-ESI-MS/MS analysis pointed out the presence of phytoecdysteroids. Phenolic acids and flavonoids, such as glycosylated derivatives of naringenin, eriodyctiol, and apigenin, were detected in the methanol extract of A. iva leaves. Our results underline the importance of choosing proper extraction methods and solvents to extract and characterize the described compounds profile of A. iva leaves. Results also show A. iva leaves as a potential source of functional ingredients with beneficial health-promoting properties. Overall, leaves of A. iva have low biological activities (antioxidant and antimicrobial activities) with a chemical composition suitable as a feed for ruminants in rangeland pasture. It also has low-grade antibacterial or medicinal characteristics when fed to ruminants.     

Chemical Composition,Antifungal and Anti-Biofilm Activities of Volatile Fractions of Convolvulus althaeoides L. Roots from Tunisia

The antifungal drugs currently available and mostly used for the treatment of candidiasis exhibit the phenomena of toxicity and increasing resistance. In this context, plant materials might represent promising sources of antifungal agents. The aim of this study is to evaluate for the first time the chemical content of the volatile fractions (VFs) along with the antifungal and anti-biofilm of Convolvulus althaeoides L. roots. The chemical composition was determined by gas chromatography coupled to a flame ionization detector and mass spectrometry. In total, 73 and 86 chemical compounds were detected in the n-hexane (VF1) and chloroform (VF2) fractions, respectively. Analysis revealed the presence of four main compounds: n-hexadecenoic acid (29.77%), 4-vinyl guaiacol (12.2%), bis(2-ethylhexyl)-adipate (9.69%) and eicosane (3.98%) in the VF extracted by hexane (VF1). n-hexadecenoic acid (34.04%), benzyl alcohol (7.86%) and linoleic acid (7.30%) were the main compounds found in the VF extracted with chloroform (VF2). The antifungal minimum inhibitory concentrations (MICs) of the obtained fractions against Candida albicans, Candida glabrata and Candida tropicalis were determined by the micro-dilution technique and values against Candida spp. ranged from 0.87 to 3.5 mg/mL. The biofilm inhibitory concentrations (IBF) and sustained inhibition (BSI) assays on C. albicans, C. glabrata and C. tropicalis were also investigated. The VFs inhibited biofilm formation up to 0.87 mg/mL for C. albicans, up to 1.75 mg/mL against C. glabrata and up to 0.87 mg/mL against C. tropicalis. The obtained results highlighted the synergistic mechanism of the detected molecules in the prevention of candidosic biofilm formation.     

A molecular model for flow induced crystallization of polymers

We present in this paper a thermodynamic model for flow induced crystallization of a thermoplastic. The thermomechanical framework (generalized standard materials) allows us to couple in a very natural way the kinetics of crystallization with the mechanical history experienced by the thermoplastic^[1]. In describing the viscoelastic properties of the polymer with a molecular theory, we obtain a model for flow-induced crystallization that couples the chain conformation to the kinetics of crystallization. This model intends to be valid both for shearing and elongation. We present the equations for two cases: Maxwell and Pom-Pom constitutive equations. We finally illustrate our model with injection molding simulations achieved with a dedicated Finite Element code.     

Barbeya oleoides Leaves Extracts: In Vitro Carbohydrate Digestive Enzymes Inhibition and Phytochemical Characterization

This study investigated the in vitro inhibitory potential of different solvent extracts of leaves of Barbeya oleoides on key enzymes related to type 2 diabetes mellitus (α-glucosidase and α-amylase) in combination with an aggregation assay (using 0.01% Triton X-100 detergent) to assess the specificity of action. The methanol extract was the most active in inhibiting α-glucosidase and α-amylase, with IC₅₀ values of 6.67 ± 0.30 and 25.62 ± 4.12 µg/mL, respectively. However, these activities were significantly attenuated in the presence of 0.01% Triton X-100. The chemical analysis of the methanol extract was conducted utilizing a dereplication approach combing LC-ESI-MS/MS and database searching. The chemical analysis detected 27 major peaks in the negative ion mode, and 24 phenolic compounds, predominantly tannins and flavonol glycosides derivatives, were tentatively identified. Our data indicate that the enzyme inhibitory activity was probably due to aggregation-based inhibition, perhaps linked to polyphenols.     

A new class of bivariate distributions and its mixture

A new class of bivariate distributions is presented in this paper. The procedure used in this paper is based on a latent random variable with exponential distribution. The model introduced here is of Marshall-Olkin type. A mixture of the proposed bivariate distributions is also discussed. The results obtained here generalize those of the bivariate exponential distribution present in the literature.     

Static analysis of functionally graded beams using higher order shear deformation theory

Displacement field based on higher order shear deformation theory is implemented to study the static behavior of functionally graded metal–ceramic (FGM) beams under ambient temperature. FGM beams with variation of volume fraction of metal or ceramic based on power law exponent are considered. Using the principle of stationary potential energy, the finite element form of static equilibrium equation for FGM beam is presented. Two stiffness matrices are thus derived so that one among them will reflect the influence of rotation of the normal and the other shear rotation. Numerical results on the transverse deflection, axial and shear stresses in a moderately thick FGM beam under uniform distributed load for clamped–clamped and simply supported boundary conditions are discussed in depth. The effect of power law exponent for various combination of metal–ceramic FGM beam on the deflection and stresses are also commented. The studies reveal that, depending on whether the loading is on the ceramic rich face or metal rich face of the beam, the static deflection and the static stresses in the beam do not remain the same.