Development of mica-based porous polymeric membrane and their application

To develop porous polymeric membrane, we have used poly(vinylidene-co-hexafluoropropylene) (P(VdF-HFP)) as a host matrix and the ionic liquid 1-ethyl-3-methylimidazolium tosylate as salt for the source of charge carriers in the polymer electrolyte system. Appropriate weight of mica (muscovite) has been added to the highest conducting polymer–salt electrolyte. The composite membrane has been prepared by breath figure method through controlling evaporation time and then tested this membrane for water filtration. The composite polymeric membrane has been characterized by X-ray diffraction, FTIR spectrometry, SEM, and electrochemical impedance spectroscopy. The pore volume in the mica-based film has been calculated, and it is found to be 64.3 % in the filler-dispersed membrane.     

The formation of α at triple junctions of parent β phase in titanium alloys

We have examined the formation of α phase at grain boundary triple junctions of parent β in a metastable β titanium alloy with orientation imaging microscopy based on electron backscattered diffraction (EBSD). As in the case of α formed at grain boundaries of parent β grains, α at a triple junction also forms with the Burgers orientation relationship with one of the three neighbouring β grains. The experimental results are analyzed in terms of the deviation of the 36 possible α variants that can form at a triple junction from the Burgers orientation relationship with neighbouring grains.     

Studies on corrosion of mild steel by water using Mössbauer spectroscopy

The corrosion of mild steel as a result of interaction with various types of local natural water samples and distilled water is studied with the help of Mössbauer spectroscopy. The data are supplemented with the studies on IR and magnetic properties as and when required. Distilled water and potable water behave in almost similar fashion wherein ferrihydrite and FeOOH are observed to be the precursors of magnetite, the end corrosion product. In case of brakish water, the additional species, viz., FeCl₂, FeOOH and an intermediate possibly FeOCl are accounted, and possible mechanisms are suggested.     

Low-distortion, high-strength bonding of thermoplastic microfluidic devices employing case-II diffusion-mediated permeant activation

We demonstrate a new method for joining thermoplastic surfaces to produce microfluidic devices. The method takes advantage of the sharply defined permeation boundary of case-II diffusion to generate dimensionally controlled, activated bonding layers at the surfaces being joined. The technique is capable of producing bonds that exhibit cohesive failure, while preserving the fidelity of fine features in the bonding interface. This approach is uniquely suited to production of layered microfluidic structures, as it allows the bond-forming interface between plastic parts to be precisely manipulated at micrometre length scales. Distortions in microfluidic device channels are limited to the size scale of the permeant-swollen layer; 6 microm deep channels are routinely produced with no detectable cross-sectional distortions. Conventional thermal diffusion bonding of identical parts yields less strongly bonded microfluidic structures with increasingly severe dimensional compressions as bonding temperatures approach the thermoplastic glass-transition temperature: a preliminary rheological analysis is consistent with the observed compressions. The bond-enhancing procedure is easily integrated in standard process flows, uses inexpensive reagents, and requires no specialized equipment.     

A microfluidic device for continuous capture and concentration of microorganisms from potable water

A microfluidic device based on electrophoretic transport and electrostatic trapping of charged particles has been developed for continuous capture and concentration of microorganisms from water. Reclaimed and bottled water samples at pH values ranging from 5.2-6.5 were seeded with bacteria (E. coli, Salmonella, and Pseudomonas) and viruses (MS-2 and Echovirus). Negative control and capture experiments were performed simultaneously using two identical devices. Culture based methods were utilized to characterize the capture efficiency as a function of the species type, time, flow rate, and applied electric field. Based on differences between the capture and negative control data, capture efficiencies of 90% to 99% are reported for E. coli, Salmonella, Pseudomonas, and MS-2, while the capture efficiency for Echovirus was between 70% and 80%. Overall, the device exhibits a 16.67 fold sample volume reduction within an hour at 6 mL h(-1) flow rate, resulting in a concentration factor of 14.2 at 85.2% capture efficiency. The device can function either as a filter or a sample concentrator without using any chemical additives. It can function as an integral component of a continuous, microbial capture and concentration system from large volumes of potable water.     

Single drop microextraction as a concentrating probe for rapid screening of low molecular weight drugs from human urine in atmospheric-pressure matrix-assisted laser desorption/ionization mass spectrometry

The present work reports the development of a new analytical procedure for simple and rapid screening of low molecular weight drugs (<500 Da) from human urine samples by atmospheric-pressure matrix-assisted laser desorption/ionization mass spectrometry (AP-MALDI-MS) combined with single drop microextraction (SDME). The success of the proposed method is due to the use of methyltrioctylammonium chloride (MTOAC) as additive to avoid the noise arising from the matrix ions (alpha-cyano-4-hydroxycinnamic acid (CHCA)). SDME also aided in alleviating the interferences arising from other matrix ions present in the urine samples prior to AP-MALDI-MS analysis. Factors affecting the extraction efficiency of drugs, such as selection of solvent, stirring speed, extraction time, exposure volume of extraction phase and salt addition, have been optimized. The optimum molar ratio of CHCA/MTOAC that gave the minimum background noise of CHCA ions was 700:1. The limit of detection (LOD) and relative standard deviation (RSD) of the method were in the ranges 0.3-1.6 microM and 7.8-11.4%, respectively. The SDME method was compared with liquid-liquid extraction (LLE) and hollow fiber liquid-phase microextraction (HF-LPME) to evaluate the compatibility of the present method in the extraction of drugs from urine samples. The role of MTOAC as matrix ion signal suppressor and SDME as analyte-separating device in the rapid screening of low molecular weight drugs from human urine samples using AP-MALDI/MS has been reported.     

A rapid, sensitive and effective quantitative method for simultaneous determination of cationic surfactant mixtures from river and municipal wastewater by direct combination of single-drop microextraction with AP-MALDI mass spectrometry

A rapid, simple, sensitive, and effective quantitative method for simultaneous determination of cationic surfactants (CS(+)) from river and municipal wastewater by direct combination of single-drop microextraction (SDME) with atmospheric pressure (AP)-MALDI mass spectrometry has been successfully demonstrated without the requirements of tedious sample pre- or post-treatment or separation by high-performance liquid chromatography (HPLC), gas chromatography (GC), and capillary electrophoresis (CE). This quantitative method can greatly enhance the signal-to-noise ratio for analysis of small molecules of CS(+) owing to the strong suppression of matrix ions by the analytes. In addition, SDME assisted in the isolation and preconcentration of CS(+) from water samples, which could effectively reduce the background interferences from the matrices present in waste and river water. The SDME conditions were optimized for achieving high extraction efficiency of CS(+) from aqueous samples, in terms of solvent selection, stirring speed, extraction time, exposure volume of acceptor phase, and salt addition. The enrichment factors for CS(+) were found to be 40-64-folds for 7 min of extraction time with no salt addition and at room temperature. This method was found to yield a linear calibration curve in the concentration range from 50 to 1500 microg/l CS(+) with a limit of detection (LOD) of 10 microg/l. The relative recoveries in river and municipal wastewater were found to be 93.8-103.6% and 91.0-98.7%, respectively. These results indicate that the combination of SDME with AP-MALDI/MS is effective for the simultaneous determination of CS(+) from river and municipal wastewater. In addition, a comparison of enrichments and LOD values for this method with hollow-fiber liquid phase microextraction (HF-LPME) was also demonstrated. The present approach is easy to operate, rapid, sensitive, and suitable for high-throughput of analysis.     

Macroscopic theory of elasticity of fourth order elastic constants of cubic structure solids

The macroscopic theory of elasticity is extended to determine the fourth order elastic constants. The expressions for the small amplitude sound wave velocity and for a natural velocity, in statically stressed media, are derived in terms of second, third and fourth order elastic constants.     

Synthesis and reactions of heterocyclic 2,3-epoxypropionitriles with pyrrolidine

The Darzen's reaction of 2-(3-)pyridinecarboxaldehydes 5 with chloroacetonitrile yielded a mixture of stereoisomers cis- 6 and trans-3-(pyridinyl)-2,3-epoxypropionitriles 7 in a ratio of approximately 1:1. Oxidation of cis- 6 and trans- 7 afforded the corresponding cis- 8 and trans-3-(1-oxidopyridinyl)-2,3-epoxypropionitriles 9 in good yield. The reaction of 8a and 9a with pyrrolidine at 25° gave the respective threo- 10 and erthyro-2-(1-pyrrolidino)-3-hydroxy-3-(1-oxido-2-pyridinyl)propionitrile ( 11 ). A number of selected compounds ( 7-9a-b ) were found to be inactive in the P388 Lymphocyctic screen.