Chemical modification of the surface of a sulfonated membrane by formation of a sulfonamide bond

This paper describes a novel approach for the surface modification of a cation-exchange membrane, bearing sulfonate groups, by a cationic layer. The modification procedure involved the chlorosulfonation of the sulfonate groups of the base membrane with thionyl chloride, followed by a reaction with a diamine to yield a sulfonamide bond and a terminal amine. The latter could be quaternized by reaction with methyl iodide or protonated by soaking in acidic media. The membranes were characterized in detail by attenuated total reflectance Fourier transform infrared and X-ray photoelectron spectroscopies as well as elemental analysis to confirm that the above reactions occurred. The selectivity of these membranes toward the electrochemically assisted transport of protons versus Zn2+ metallic cations was determined during an electrodialysis in a two-compartment electrochemical cell. The data indicate a significant decrease of the transport of the metallic cations following modification of the membrane with the cationic layer. The later allows for the transport of protons from the catholyte to the anolyte compartment with much improved selectivity since the divalent cations are excluded from the membrane due to the electrostatic barrier of the cationic layer.     

Gravity-induced convective flow in microfluidic systems: electrochemical characterization and application to enzyme-linked immunosorbent assay tests

A way of using gravity flow to induce a linear convection within a microfluidic system is presented. It is shown and mathematically supported that tilting a 1 cm long covered microchannel is enough to generate flow rates up to 1000 nL.min(-1), which represents a linear velocity of 2.4 mm.s(-1). This paper also presents a method to monitor the microfluidic events occurring in a covered microchannel when a difference of pressure is applied to force a solution to flow in said covered microchannel, thanks to electrodes inserted in the microfluidic device. Gravity-induced flow monitored electrochemically is applied to the performance of a parallel-microchannel enzyme-linked immunosorbent assay (ELISA) of the thyroid-stimulating hormone (TSH) with electrochemical detection. A simple method for generating and monitoring fluid flows is described, which can, for instance, be used for controlling parallel assays in microsystems.     

Polarizing a hydrophobic cavity for the efficient binding of organic guests: the case of calix[6]tren, a highly efficient and versatile receptor for neutral or cationic species

The host-guest properties of calix[6]tren 1 have been evaluated. The receptor is based on a calix[6]arene that is covalently capped at the narrow rim by a tren unit. As a result, the system presents a concave hydrophobic cavity with, at its bottom, a grid-like nitrogenous core. Despite its well-defined cavity and opening to the outside at the large rim, 1 did not behave as a good receptor for neutral molecules in chloroform. However, it exhibited efficient endo-complexation of ammonium guests. By contrast, the per-protonated host, 1.4H(+), behaved as a remarkable receptor for small organic molecules. The complexation is driven by a strong charge-dipole interaction and hydrogen bonds between the polar guest and the tetracationic cap of the calixarene. Finally, coordination of Zn(2+) to the tren core led to the asymmetrization of calixarene cavity and to the strong but selective endo-binding of neutral ligands. This study emphasizes the efficiency of a receptor presenting a concave hydrophobic cavity that is polarized at its bottom. The resulting combination of charge-dipole, hydrogen bonding, CH-pi, and van der Waals interactions highly stabilizes the supramolecular architectures. Also, importantly, the tren cap allows the tuning of the polarization, offering either a basic (1), a highly charged and acidic (1.4H(+)), or a coordination (1.Zn(2+)) site. As a result, the system proved to be highly versatile, tunable, and interconvertible in solution by simple addition of protons, bases, or metal ions.     

Biomimetic zinc funnel complexes based on calix[6]N3ArO ligands: an acid-base switch for guest binding

The coordination chemistry of Zn in an N(3)ArOH environment has been explored. The ligands are based on calix[6]arenes that present two imidazole arms and an amino phenol moiety at the narrow rim. Three different types of complexes have been characterized. One is dicationic with Zn(2+) coordinated to the three nitrogen atoms and to the oxygen of the phenol group of the calix[6]ligand. This complex is very sensitive to exogenous coordinating molecules and exists as a 5-coordinate species due to the endo-complexation of a guest. The second species is a monocationic complex for which the phenol group has been deprotonated. The resulting N(3)ArOZn complex can also bind a guest ligand albeit with a lower affinity than the dicationic complex. The third species is neutral. It can be obtained upon reaction with a base to yield a hydroxo complex or with an anion such as a chloride that coordinates the metal center from the outside of the calixarene cavity. The simultaneous binding of two anionic donors decreases the Zn Lewis acidity, allowing an impressive conformational reorganization of the system. One imidazole arm is released by the metal center. The other one undergoes self-inclusion into the pi-basic calixarene cavity because the low affinity of the metal center for neutral ligand does not allow the endo-coordination of an exogenous guest. Hence, the calix[6]N(3)ArOH-based Zn complexes act as an acid-base switch for guest binding. Several aspects of this system appear reminiscent of Zn-peptidases of the astacin and serralisin families.     

Détermination de l'énergie de conjugaison des acides naphtoǐques

The present paper deals with the experimental and theoretical determination of energies of conjugation of organic molecules.A computation process has been applied, first to simple molecules comprising an hydrocarbon (styrene), an oxygen function (benzaldehyde) and a nitrogen function (aniline). The results are compared with those obtained from the literature.The application of this computation process to naphthoic acids permits the determination of energies of conjugation and isomerization of these molecules.     

Ethylenic compounds reactivity: bromination—XLI: Relative reactivities of R1CMeCH2 and R1CHCMe2 series as a criterion for distinguishing between bridged and acyclic transition states. Degree of symmetry of the bromonium ion-like transition state

Reactivities of homogeneous series of ethylenic compounds R¹CHCH₂1, trans R¹CHCHMe 2, R¹MeCCH₂3 and R¹CHCMe₂4 have been measured in methanol at 25°C (R¹ Me, Et, n-Pr, -CH₂C₆H₅-CH₂OCOCH₃, -CH₂Cl). The criterion developed to decide between a bridged and a carbonium ion-like transition state is based on an internal comparison of the series and avoids resorting to external structural scales. Even in the case of alkenes 3 and 4 which are very dissymmetric with respect to polarity, the sensitivity to polar effects remains constant and the transition state behaves like a symmetric entity; only a slight secondary effect, attributed to hyperconjugation, is detectable.     

Dynamic equilibrium of ion exchange in the system lead-cation exchanger at different temperatures

Summary The relationship between the ion-exchange reaction in a column and temperature was examined in the system lead-ion exchanger resin Lewatit S 1080. Lead binding was performed with 0.01 mol/l HNO₃ and elution with 4.0 mol/l HCl. The working temperature was gradually increased from 273 to 333 K. Thermostat columns were of own construction. The results were statistically analysed and graphically presented and the parameters obtained for elution curves were related to temperature. The elution curves were found to be temperature specific. The parameters such as elution band width, distribution factor, maximal volume of the eluate, maximal lead concentration in the eluate, confirmed this fact. At higher temperatures, larger volumes of elution solution were required for the elution of the same quantity of lead.

---

Ionenaustausch im System Blei-Kationischer Austauscher bei verschiedenen Temperaturen

     

Experimental and theoretical study on the olefin metathesis of alkenyl Baylis-Hillman adducts using second-generation Grubbs catalyst

[reaction: see text] We have investigated the olefin metathesis from alkenyl Baylis-Hillman adducts using second-generation Grubbs catalyst. In the experiment, the ring-closing metathesis (RCM) product could not be found, while the cross-metathesis (CM) products were found. The computational studies provided consistent explanations for the experimental result. The most limiting factor for the RCM process using second-generation Grubbs catalyst is caused by the high strain and steric effect in the metallacyclobutane intermediates.     

Regioselectivity of Birch reductive alkylation of biaryls

[reaction: see text] The regioselectivity of the Birch reductive alkylation of polysubstituted biaryls has been investigated. Results indicate that regioselectivity is affected by the electronic nature of substituents on both aromatic rings. The electron-rich 3,5-dimethoxyphenyl moiety is selectively reduced and then alkylated, while phenols and aniline are not dearomatized under these conditions. Biaryls possessing a phenol moiety are alkylated on the second ring, providing that the acidic proton has been removed prior to the Li/NH3 reduction.