基于微波迈克耳孙干涉仪的傅里叶变换光谱分析实验

基于近代物理实验中微波的迈克耳孙干涉实验方法,在分析傅里叶变换光谱分析原理的基础上,利用微波分光仪首先分离了2个已知微波源的谱分布,并定量分析了最大分辨率与最大光程差、最大测量范围与采样间距之间的关系.     

Study of separated function radio frequency quadrupoles accelerator

SFRFQ (Separated Function Radio Frequency Quadrupoles) accelerator is a new post accelerator of RFQ (Radio Frequency Quadrupoles) type, which has been developed since the beginning of the 1990s at Peking University. In order to demonstrate the possibility of the SFRFQ, a prototype cavity has been designed.A special dynamics design method has been proposed to avoid the sparking problem and decrease the energy spread at the exit of SFRFQ. It consists of two aspects: the asymmetry structure design for transverse focusing and the inner buncher design for longitudinal bunching. This allows the improvement of the beam properties without increasing the cavity length. The simulation results show that the energy spread can be substantially reduced by using the inner buncher in the SFRFQ structure.     

双频光栅轮廓术的研究

在投影栅相位法轮廓检测中,当物体含突变部分时,包裹相位很难准确恢复,对此可用双频变精度技术来解决。如果用两种不同频率光栅分两次进行测量,无疑增加了测量负担,也无法满足实时检测的要求。提出用软件生成两种不同频率成分的复合正弦光栅,用液晶投影仪投影,针对不同物体具体突变部分的情况,可灵活生成各种不同灵敏度的复合光栅。只采一次图像就可以达到以往双频技术中多次采集的效果,该法具有快速和去包裹精度高的特点。最后,进行了实验测试,结果非常满意。     

微量脉冲进样-导数火焰原子吸收光谱法测定调味品中锌

将微量脉冲进样技术和导数火焰原子吸收光谱法结合 ,建立了测定调味品中锌含量的新方法。探讨了微量进样体积和导数仪档位等影响因素。样品经离心、稀释后直接测定 ,该方法的灵敏度和检出限分别为 0 0 0 4和 0 0 13μg·mL-1,相对标准偏差为 3 0 %～ 4 4 % ,回收率 93 3%～ 113 3%。该方法准确和快速 ,结果令人满意。     

High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Lower hybrid wave （LHW）, electro cyclotron （EC） and neutral beam injection （NBI） etc. are the important methods of auxiliary heating. They would be devoted to the HL-2A tokamak step by step. In order to satisfy the debug of each system and the need of the experiment, the system should be equipped with high voltage pulse power （HVPP） according to the requirement.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

A Monte Carlo study for the shielding of γ backgrounds induced by radionuclides for CDEX

The CDEX (China Dark matter EXperiment) Collaboration will carry out a direct search for WIMPs (Weakly Interacting Massive Particles) using an Ultra-Low Energy Threshold High Purity Germanium (ULE-HPGe) detector at the CJPL (China JinPing deep underground Laboratory). A complex shielding system was designed to reduce backgrounds and a detailed GEANT4 Monte Carlo simulation was performed to study the achievable reduction of γ rays induced by radionuclides and neutron backgrounds by D(γ,n)p reaction. Furthermore, the upper level of allowed radiopurity of shielding materials was estimated under the constraint of the expected goal. Compared with the radiopurity reported by other low-background rare-event experiments, it indicates that the shielding used in the CDEX can be made out of materials with obtainable radiopurity.     

大分离条件下风力机叶片三维定常数值模拟研究

为了改善失速条件下风力机气动特性的CFD模拟精度,采用定常的RANS求解方法和一方程S-A湍流模型,数值模拟定桨距型风轮叶片LM19在高风速(18m/s)条件下的气动特性.首先讨论了由流动大尺度分离导致计算收敛曲线大幅度振荡时数值结果的处理方法,然后分析了计算域尺度和网格密度对数值模拟结果的影响,为失速条件下风力机气动...     

大庆油田和南阳油田采出水的分析

采用高压消解罐法消解处理样品,对大庆油田和南阳油田几个驱块的采出水样品进行了全离子分析.用ICP-AES测定了其中Na、K、Ca、Mg、Al、Ba、Sr、Mn、Si元素的含量.方法回收率在95.00%-106.00%,相对标准偏差小于2.15%.采用离子色谱测定了各驱采出水中Cl<'->、SO<,4><'2->含量,方...     

声表面波射频标签码容量的最大化

声表面波标签是一种不使用集成电路芯片的射频识别技术。由于其与半导体射频标签在原理上的本质区别,在若于特殊场合下具有独特的优势。声表面波标签的码容量通常很难满足实际应用的需求,成为限制其广泛应用的主要原因。提出了一种设计声表面波射频标签系统的新方法,从以下两方面增大码容量:(1)根据实际系统的误差概率和所要求的可靠性,最佳地决定系统设计的分辨精度;(2)采用反射脉冲的时延间隔代替反射脉冲的绝对时延位置来表述该脉冲代表的码片值,从而避免了人为分组,在一定空间内最大可能地增大了码容量。以中心频率922.5 MHz、带宽5 MHz的射频标签为例,在8 mm长的128°YX-LiNbO₃压电基片上,制作了码容量超过三下万的系统。该系统包括温度校准,在识别标签的同时并能测出温度,精度为0.5℃。