Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Organo-tricyanoborates as tectons: illustrative coordination polymers based on copper(I) derivatives

The first systematic study on the use of tricyanoborates as ligands is presented. The tricyanoborates [RB(CN)3]- (R = oct and Ph) can be prepared by direct cyanation of RBCl2 precursors as well as by thermolysis of the corresponding isocyanides [RB(NC)3]-. The first organo-cyanogallates [RGa(CN)3]- (R = Bu, C6H2-2,4,6-Me3) were prepared from the corresponding dichloride, the structure of Et4N[mesGa(CN3] being confirmed crystallographically. The reaction of equimolar [RB(CN)3]- (R = oct, Ph) and [Cu(MeCN)4]+ afforded two-dimensional polymers [RB(CN)3Cu(NCMe)]. The sheets arise via conjoined hexagonal B3Cu3(CN)6 rings with chair conformations. The reaction of excess [PhB(CN)3]- and [Cu(MeCN)4]+ gives the polymer [K(18-crown-6)]{Cu[PhB(CN)3]2}. Treatment of [PhB(CN)3]- with [Cu(PCy3)2(NCMe)x]PF6 gave the one-dimensional polymer [PhB(CN)3Cu(PCy3)2], wherein two of the three BCN substituents are coordinated.     

Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

A highly stereoselective synthesis of the C10–C31 (BCDEF ring) portion of pinnatoxin A

An efficient, highly stereoselective synthesis of the C10–C31 (BCDEF ring) portion of pinnatoxin A has been achieved utilizing tandem double hemiketal formation/intramolecular hetero-Michael addition to construct the 6,5,6-dispiroketal (BCD ring) system and subsequent intramolecular ketalization to form the 5,6-bicycloketal (EF ring) system as key steps.     

高能闪光照相中影响光程确定的几个因素

 利用闪光照相基本原理和成像原理，在直接记录法和转换屏记录法的情况下，研究了闪光照相中影响X射线在材料中光程确定的主要因素。结果表明，影响光程确定的几个因素是：散射效应、光源角分布效应、立体角效应和能谱效应。对于高能闪光照相，散射效应是影响光程确定的最主要因素，散射的存在使光程的测量值比实际值降低20%～40%。因此必须在做CT之前，对散射的影响进行修正。     

Synthesis of PNIPAAm-g-P4VP Microgel as Draw Agent in Forward Osmosis by RAFT Polymerization and Reverse Suspension Polymerization to Improve Water Flux

Microgels have unique and versatile properties allowing their use in forward osmosis areas as a draw agent. In this contribution, poly(4-vinylpyridine) (P4VP) was synthesized via RAFT polymerization and then grafted to a poly(N-Isopropylacrylamide) (PNIPAAm) crosslinking network by reverse suspension polymerization. P4VP was successfully obtained by the quasiliving polymerization with the result of nuclear magnetic resonance and gel permeation chromatography characterization. The particle size and particle size distribution of the PNIPAAm-g-P4VP microgels containing 0, 5, 10, 15 and 20 wt% P4VP were measured by means of a laser particle size analyzer. It was found that all the microgels were of micrometer scale and the particle size was increased with the P4VP load. Inter/intra-molecular-specific interactions, i.e., hydrogen bond interactions were then investigated by Fourier infrared spectroscopy. In addition, the water flux measurements showed that all the PNIPAAm-g-P4VP microgels can draw water more effectively than a blank PNIPAAm microgel. For the copolymer microgel incorporating 20 wt% P4VP, the water flux was measured to be 7.48 L∙m⁻²∙h⁻¹.     

Isolation of a carbon nanohoop with M(o)bius topology

Carbon nanohoop,a class of constrained molecular architecture consisting of linked arene units,has attracted considerable interest from both experimental and th...     

Carbene-catalyzed activation of cyclopropylcarbaldehydes for mannich reaction and δ-lactam formation: remote enantioselecitvity control and dynamic kinetic asymmetric transformation

An N-heterocyclic carbene(NHC)-catalyzed enantioselective Mannich reaction of the remote γ-carbon of cyclopropylcarbaldehydes is disclosed for the first time. Diastereo-and enantiomerically enriched multicyclic δ-lactam compound is afforded as the main product from 8 possible stereo-specific isomers through dynamic kinetic asymmetric transformation(DYKAT) processes. Multiple chiral functional molecules can be afforded from the lactam products through simple protocols with retentions of the optical purities.