Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

Synthesis, NMR conformational analysis and pharmacological evaluation of 7,7a,13,14-tetrahydro-6H-cyclobuta[b]pyrimido[1,2-a:3,4-a']diindole analogues as melatonin receptor ligands

A structure for the self-condensation product of 2-(1H-indol-2-yl)ethyl tosylate 2a, previously proposed as 6,7,14,15-tetrahydro-15aH-azocino[1,2-a:6,5-b]diindole 3a, was revised based on the (13)C-2D-INADEQUATE experiment, and proved to be 7,7a,13,14-tetrahydro-6H-cyclobuta[b]pyrimido[1,2-a:3,4-a']diindole 4a. A mechanism for the unexpected formation of this novel hexacyclic heterocycle was proposed and its NMR solution structure was elucidated. Five derivatives of the title ring skeleton 12-16 designed as melatonin receptor ligands were synthesized and their affinities for the human MT(1) and MT(2) receptors were determined. Both butyramides 13 and 15, as well as the non-methoxy acetamide 12 exhibited micromolar binding affinities for both receptors being slightly MT(2) selective. The methoxy acetamide 14 showed the best pharmacological profile exhibiting a five times higher affinity for MT(1) (K(i) = 49 nM) than for MT(2) (K(i) = 246 nM) receptor.     

The trigonal–bipyramidal triiodo­thallium(III) complex [TlI3{(CH3)2SO}2]

The title compound, bis(dimethyl sulfoxide)triiodo­thallium(III), [TlI₃(C₂H₆OS)₂], was crystallized from equimolar amounts of Tl^II and I₂ in a dimethyl sulfoxide (DMSO) solution. After the initial redox reaction, the thallium(III)–iodo complex forms and precipitates as a DMSO solvate. In the crystal structure, Tl is surrounded by three iodide ligands in the equatorial plane and two O‐coordinated DMSO mol­ecules in the axial positions, forming a slightly distorted trigonal bipyramid. The complex lies on a twofold rotation axis, making the DMSO mol­ecules and two of the I atoms crystallographically equivalent.     

A light controlled cavitand wall regulates guest binding

Here we report a cavitand with a photochemical switch as one of the container walls. The azo-arene switch undergoes photoisomerization when subjected to UV light producing a self-fulfilled cavitand. This process is thermally and photochemically reversible. The reported cavitand binds small molecules and these guests can be ejected from the cavitand through this photochemical process.     

An order-disorder transition in Sr2IrD5: Evidence for square pyramidal IrD5 units from powder neutron diffraction data

Neutron diffraction data have been collected on a powdered sample of Sr₂IrD₅ over a range of temperatures. The compound, which is cubic at room temperature, has been found to exhibit a gradual transformation to a tetragonal phase in the temperature range 200-140 K. As a result of the transition, deuterium atoms which randomly occupy sixfold positions in the cubic phase, become tetragonally ordered. A small fraction of the cubic phase remained untransformed at 4.2 K. Both the cubic and tetragonal structures are consistent with square pyramidal IrD₅ units with average Ir---D distances of 1.714 and 1.718 Å, respectively. Agreement factors, R₁, for the two structural analyses are 3.44 and 4.94%.     

Conformational dependence of the intrinsic acidity of the aspartic acid residue sidechain in N-acetyl- -aspartic acid-N′-methylamide

The sidechain conformational potential energy hypersurfaces (PEHS) for the γ_L, β_L, α_L, and α_D backbone conformations of N-acetyl- -aspartate-N′-methylamide were generated. Of the 81 possible conformers initially expected for the aspartate residue, only seven were found after geometric optimizations at the B3LYP/6-31G(d) level of theory. No stable conformers could be located in the δ_L, _L, γ_D, δ_D, and _D backbone conformations. The ‘adiabatic’ deprotonation energies for the endo and exo forms of N-acetyl- -aspartic acid-N′-methylamide were calculated by comparing their optimized relative energies against those found for the seven stable conformers of N-acetyl- -aspartate-N′-methylamide. Sidechain conformational PEHSs were also generated for the estimation of ‘vertical’ deprotonation energies for both endo and exo forms of N-acetyl- -aspartic acid-N′-methylamide. All backbone–sidechain (N–H⁻O–C) and backbone–backbone (N–HO=C) hydrogen bond interactions were analyzed. A total of two backbone–backbone and four backbone–sidechain interactions were found for N-acetyl- -aspartate-N′-methylamide. The deprotonated sidechain of N-acetyl- -aspartate-N′-methylamide may allow the aspartyl residue to form strong hydrogen bond interactions (since it is negatively charged) which may be significant in such processes as protein–ligand recognition and ligand binding. As a primary example, the molecular geometry of the aspartyl residue may be important in peptide folding, such as that in the RGD tripeptide.     

Capillary zone electrophoretic studies of ion association between inorganic anions and tetraalkylammonium ions in aqueous-dioxane media

Ion association between inorganic anions and symmetrical tetraalkylammonium ions, R4N+ (R = Me, Et, Pr, n-Bu, n-Am, and 2-methyl butyl {isoamyl = iAm}) was investigated using ordinary silica capillary by capillary zone electrophoresis. An improved version of the Williams-Vigh method was used for the first time to measure the mobilities of the inorganic anions. Plots of log Kass against log dielectric constant in various media, revealed a smaller change in Kass compared to dielectric constant. These plots suggest that the Bjerrum's equation is inadequate in accounting for the associations of ions in a CZE setup.     

Synthesis and characterization of novel elastomeric poly(D,L-lactide urethane) maleate composites for bone tissue engineering

Here, we report the synthesis and characterization of a novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its composites with nano-hydroxyapatite (nHA) as potential weight-bearing composite. The 4PLAUMA/nHA ratios of the composites were 1:3, 2:5, 1:2 and 1:1. FTIR and NMR characterization showed urethane and maleate units integrated into the PLA matrix. Energy dispersion and Auger electron spectroscopy confirmed homogeneous distribution of nHA in the polymer matrix. Maximum moduli and strength of the composites of 4PLAUMA/nHA, respectively, are 1973.31 ± 298.53 MPa and 78.10 ± 3.82 MPa for compression, 3630.46 ± 528.32 MPa and 6.23 ± 1.44 MPa for tension, 1810.42 ± 86.10 MPa and 13.00 ± 0.72 for bending, and 282.46 ± 24.91 MPa and 5.20 ± 0.85 MPa for torsion. The maximum tensile strains of the polymer and composites are in the range of 5–93%, and their maximum torsional strains vary from 0.26 to 0.90. The composites exhibited very slow degradation rates in aqueous solution, from approximately 50% mass remaining for the pure polymer to 75% mass remaining for composites with high nHA contents, after a period of 8 weeks. Increase in ceramic content increased mechanical properties, but decreased maximum strain, degradation rate, and swelling of the composites. Human bone marrow stem cells and human endothelial cells adhered and proliferated on 4PLAUMA films and degradation products of the composites showed little-to-no toxicity. These results demonstrate that novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its nHA composites may have potential applications in regenerative medicine.     

Vinylimidazole‐based asymmetric ion pair comonomers: Synthesis,polymerization studies and formation of ionically crosslinked PMMA

Vinylimidazole‐based asymmetric ion pair comonomers ( IPC s) which are free from nonpolymerizable counter ions have been synthesized, characterized and polymerized by free radical polymerization (FRP), atom transfer radical polymerization (ATRP), and reversible addition‐fragmentation chain transfer (RAFT) mediated polymerizations in solution and by dispersion polymerization in water. The asymmetric nature of IPC s is due to the fact that cationic component of these IPCs is derived from vinylimidazole (VIm) and anionic component is derived from either styrenesulfonate (SS) or 2‐acrylamido‐2‐methyl‐1‐propanesulfonate. Although under ATRP, conversions are either very low or negligible, FRP and RAFT produces polymers with high to moderate monomer conversions but with different solubility characteristics. This investigation provides insight to the polymerization behavior of each component of the asymmetric IPCs and also its effects on composition and solubility characteristics of the resulting polymers. The IPCs studied here are high temperature ionic liquid and thus the polymers synthesized from these IPCs are highly ionic in nature and possess very strong intermolecular interactions which makes some of these IPC based polymers completely insoluble in organic and aqueous solvents. This highly ionic interaction is exploited to synthesize ionically crosslinked PMMA. MMA on copolymerization with 5–6 mol % of IPC yielded copolymer which is insoluble in common organic solvents like THF, DMF, etc., unlike homo PMMA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3260–3273