Semiclassical calculations with nuclear model potentials in the ħ-resummation approach

The single-particle densityρ(r) of a system of fermions can be calculated in a tractable way as the Laplace inverse of the Bloch density describing the system. The complex integrals involved can be solved very easily by the saddle-point method. The semiclassical nature of this approach is illustrated in the simple example of the single-particle level density of a harmonic oscillator potential. It is then applied to calculate the total energy of particles in different mean field potentials. The exact Bloch density being generally unknown, different approximate forms are used in our calculations which correspond to a partial resummation of the Wigner-Kirkwood?-expansion. The resulting local densities reproduce the exact density distributions on the average, without quantal oscillations. They are well defined everywhere, even beyond the classical turning point, in contrast to the original Wigner-Kirkwood approach.     

Palladium-catalyzed amination of aryl nonaflates

The first detailed study of the palladium-catalyzed amination of aryl nonaflates is reported. Use of ligands 2-4 and 6 allows for the catalytic amination of electron-rich and -neutral aryl nonaflates with both primary and secondary amines. With use of Xantphos 5, the catalytic amination of a variety of functionalized aryl nonaflates resulted in excellent yields of anilines; even 2-carboxymethyl aryl nonaflate is effectively coupled with a primary alkylamine. Moderate yields were obtained when coupling halo-aryl nonaflates with a variety of amines, where in most cases the aryl nonaflate reacted in preference to the aryl halide. Overall, aryl nonaflates are an effective alternative to triflates in palladium-catalyzed C-N bond-forming processes due to their increased stability under the reaction conditions.     

Hybrid fluorocarbon-hydrocarbon CO2-philic surfactants. 2. formation and properties of water-in-CO2 microemulsions

Hybrid fluorocarbon-hydrocarbon (F-H) sulfate surfactants are shown to be efficient stabilizers in water-in-CO2 (w/c) microemulsions. The chain structure and F-H ratio affect the regions of P-T phase stability and aggregation structure in these w/c phases. High-pressure near-infrared spectroscopy and small-angle neutron scattering measurements of microemulsified water provide evidence for the stabilization of w/c microemulsion droplets. The relative lengths of the two chains were found to influence the favored aggregation structure: for symmetric chain surfactants (F8H8, F7H7) spherical reverse micelles are present, but for asymmetric chain surfactants (F7H4, F8H4) extended cylinder aggregates form. These changes in aggregation are consistent with different surfactant packing parameters owing to the controlled variations in molecular structure. Furthermore, the general order of w/c phase transition pressures (F8H8 < F7H7 and F8H4 < F7H4) is in line with estimations of surfactant fractional free volume, as proposed by Johnston et al. (J. Phys. Chem. B 2004, 108, 1962-1966). Studies of adsorption at the poly(dimethylsiloxane)-water interface are shown to be valuable for assessing the CO2-philicity of new surfactants. All in all, the symmetric F8H8 and F7H7 analogues are seen to be the most efficient compounds from this class for applications in CO2.     

PHOTOCHEMISTRY OF TYPE I ACID-SOLUBLE CALF SKIN COLLAGEN: DEPENDENCE ON EXCITATION WAVELENGTH

Although previous studies have demonstrated that the predominant photochemistry of type I collagen under 254 nm irradiation may be attributed either to direct absorption by tyrosine/phenylalanine or to peptide bonds, direct collagen photochemistry via solar UV wavelengths is much more likely to involve several age- and tissue-related photolabile collagen fluorophores that absorb in the latter region. In this study, we compare and contrast results obtained from irradiation of a commercial preparation of acid-soluble calf skin type I collagen in solution with UVC (primarily 254 nm), UVA (335–400nm) and broad-band solar-simulating radiation (SSR; 290^1–00nm). Excitation spectroscopy and analysis of photochemically induced disappearance of fluorescence (fluorescence fading) indicates that this preparation has at least four photolabile fluorescent chromophores. In addition to tyrosine and L-3,4-dihydroxyphenylalanine, our sample contains two other fluorophores. Chromophore I, with emission maximum at 360 nm, appears to be derived from interacting aromatic moieties in close mutual proximity. Chromophore II, with broad emission at430–435 nm, may be composed of one or more age-related molecules. Collagen fluorescence fading kinetics are sensitive to excitation wavelength and to conformation. Under UVC, chromophore I fluorescence disappears with second-order kinetics, indicating a reaction between two proximal like molecules. Adherence to second-order kinetics is abrogated by prior denaturation of the collagen sample. A new broad, weak fluorescence band at400–420 nm, attributable to dityrosine, forms under UVC, but not under solar radiation. This band is photolabile to UVA and UVB wavelengths. Amino acid analysis indicates significant destruction of aromatic amino acids under UVC, but not under UVA or SSR. When properly understood, collagen fluorescence fading phenomena may act as a sensitive molecular probe of structure, conformation and reactivity.     

Two new terpyridine dimanganese complexes: a manganese(III,III) complex with a single unsupported oxo bridge and a manganese(III,IV) complex with a dioxo bridge. Synthesis, structure, and redox properties

Two new terpyridine dimanganese oxo complexes [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(CF(3)CO(2))(2)](+) (3) and [Mn(2)(III,III)(mu-O)(terpy)(2)(CF(3)CO(2))(4)] (4) (terpy = 2,2':6,2' '-terpyridine) have been synthesized and their X-ray structures determined. In contrast to the corresponding mixed-valent aqua complex [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(H(2)O)(2)](3+) (1), the two Mn atoms in 3 are not crystallographically equivalent. The neutral binuclear monooxo manganese(III,III) complex 4 exhibits two crystallographic forms having cis and trans configurations. In the cis complex, the two CF(3)CO(2)(-) ligands on each manganese adopt a cis geometry to each other; one CF(3)CO(2)(-) is trans to the oxygen of the oxo bridge while the second is cis. In the trans complex, the two coordinated CF(3)CO(2)(-) have a trans geometry to each other and are cis to the oxo bridge. The electrochemical behavior of 3 in organic medium (CH(3)CN) shows that this complex could be oxidized into its corresponding stable manganese(IV,IV) species while its reduced form manganese(III,III) is very unstable and leads by a disproportionation process to Mn(II) and Mn(IV) complexes. Complex 4 is only stable in the solid state, and it disproportionates spontaneously in CH(3)CN solution into the mixed-valent complex 3 and the mononuclear complex [Mn(II)(terpy)(2)](2+) (2), thereby preventing the observation of its electrochemical behavior.     

Chemiluminescent determination of vanadium in steel

Summary A chemiluminescent method for the determination of vanadium in steel with cinchomeronic hydrazide as analytical reagent is proposed. The optimum conditions are pH 11.75 (phosphate buffer), 1.0×10^–3 mol/l cinchomeronic hydrazide, 6.6×10^–3 mol/l hydrogen peroxide and 2.8×10^–3 mol/l V(IV). The maximum chemiluminescent emission is obtained at 420 nm. A linear relationship exists in the range of 0.04–1.00 g/ml of V(IV) with a 3.6% variation coefficient at 0.50 g/ml of V(IV) level for ten replicates. Cobalt(II), copper(II) and chromium(VI) show strong interference and a chloroform extraction procedure with -benzo-inoxime is recommended to avoid these interferences. This method has been applied to determine vanadium in a certified steel with excellent results.Presented at Euroanalysis VII     

Structure Cristalline du Trimétaphosphate d'Indium(III)

Crystal Structure of In (PO₃)₃ Indium(III) trimetaphosphate In(PO₃)₃ crystallizes in the monoclinic space group Ic with a = 10.876(2) Å, b = 19.581(2) Å, c = 9.658(2) Å, β = 97.77(1)° and Z = 12. The structure was refined to R = 0.027 utilizing 1171 independent reflections. The structure consists of infinite chains of [PO₄] tetrahedra sharing corners with each other. InO₆ octahedra connect parallel chains. Each oxygen atom is shared between two [PO₄] tetrahedra (in the infinite chains (PO₃)_n) or one [PO₄] tetrahedron and one [InO₆] octahedron. For the first type of oxygen atoms (O_M) the P? O distances are about 0.1 Å greater than the P? O distances of the second type of oxygen atoms (O_m). The [InO₆] groups are moderately distorted and the average In? O bond length for the three In³⁺ ions is 2.117 Å.     

Relationship between side chain structure and 14-helix stability of beta3-peptides in water

Folded polymers are used in Nature for virtually every vital process. Nonnatural folded polymers, or foldamers, have the potential for similar versatility, and the design and refinement of such molecules is of considerable current interest. Here we report a complete and systematic analysis of the relationship between side chain structure and the 14-helicity of a well-studied class of foldamers, beta(3)-peptides, in water. Our experimental results (1) verify the importance of macrodipole stabilization for maintaining 14-helix structure, (2) provide comprehensive evidence that beta(3)-amino acids branched at the first side chain carbon are 14-helix-stabilizing, (3) suggest a novel role for side chain hydrogen bonding as an additional stabilizing force in beta(3)-peptides containing beta(3)-homoserine or beta(3)-homothreonine, and (4) demonstrate that diverse functionality can be incorporated into a stable 14-helix. Gas- and solution-phase calculations and Monte Carlo simulations recapitulate the experimental trends only in the context of oligomers, yielding insight into the mechanisms behind 14-helix folding. The 14-helix propensities of beta(3)-amino acids differ starkly from the alpha-helix propensities of analogous alpha-amino acids. This contrast informs current models for alpha-helix folding, and suggests that 14-helix folding is governed by different biophysical forces than is alpha-helix folding. The ability to modulate 14-helix structure through side chain choice will assist rational design of 14-helical beta-peptide ligands for macromolecular targets.     

Syntheses of perfluorinated epoxides,diepoxides, and a novel rearrangement

t-Butylhydroperoxide/butyl-lithium is a good reagent for synthesis of epoxides and diepoxides from polyfluorinated-alkenes and-polyenes. This reagent and calcium hypochlorite both give a novel diepoxide 5 from perfluoro-3,4-dimethyl-2,4-diene 1; diepoxide 5 undergoes a novel rearrangement, at 200°C, to the corresponding 1,4-dioxine derivative 18. Possible mechanisms are discussed.