Optical modeling of laterally-corrugated ridge-waveguide gratings

The paper presents some model improvements for the optical simulation of laterally-corrugated ridge-waveguide distributed feedback lasers. Simulation results are discussed and design principles for achieving single-longitudinal-mode operation are outlined. The effects of the laterally-corrugated ridge geometry both on the coupling coefficient and on the Bragg wavelength of different transverse modes are presented. The improved modeling has been used to design 980 nm distributed feedback lasers with laterally-corrugated ridge-waveguide third-order gratings. The lasers fabricated using nanoimprint lithography exhibited single-mode operation with 50 dB side-mode suppression ratio.     

Optical multi-sensor for simultaneous measurement of absorbance,turbidity, and fluorescence of a liquid

We have built a novel optical multi-sensor apparatus (MSA) for the measurement of light absorption, scattering and fluorescence either separately or simultaneous from a liquid. From the measured data it is possible to calculate different optical properties of liquid samples, such as absorbance and turbidity. The MSA is a portable device which is an advantage considering different field applications. The MSA was tested in laboratory conditions using well-known reference liquids. Data obtained with the MSA were compared with data obtained with a commercial spectrophotometer, fluorometer and a nephelometer, respectively. Relatively good correlations between the data of MSA and the three commercial devices were found. It is proposed that MSA is a potential device for monitoring changes of process liquids and liquid products in industry.     

Synthesis of copolymer-stabilized silver nanoparticles for coating materials

Silver ions being less toxic than silver nanoparticles, a more safe material can be obtained to be used as antimicrobial coating. This can be achieved by using thiol chemistry and covalently attach the silver nanoparticles in the coating. Our aim is to produce a coating having antimicrobial properties of silver ions but with the silver nanoparticles firmly attached in the coating. Here, we present a way to produce silver nanoparticles that can be used as a component in a coating or as such to produce an antimicrobial coating. The silver nanoparticles presented here are stabilized by a copolymer (poly(butyl acrylate–methyl methacrylate)) that is soft and has well-known good film-producing properties. The reversible addition-fragmentation chain transfer radical polymerization technique used to prepare the polymers provides conveniently a thiol group for effective binding of the silver nanoparticles to the polymers and thus to the coating.     

Low-medium resolution HLA-DQ2/DQ8 typing for coeliac disease predisposition analysis by colorimetric assay

Coeliac disease is an inflammation of the small intestine, occurring in genetically susceptible individuals triggered by the ingestion of gluten. Human Leukocyte Antigens (HLA) DQ2 and DQ8 gene have been identified as key genetic factors in coeliac disease as they are presented in almost 100 % of the patients. These genes are encoded by the combination of certain alleles in the DQA and DQB region of chromosome 6. Specifically, DQA1*05:01 and DQB1*02:01 alleles for serologically defined leukocyte antigen DQ2 cis, DQA1*05:05 and DQB1*02:02 for DQ2 trans and DQA1*03:01 and DQB1*03:02 alleles for the DQ8. Specific identification of these alleles is a challenge due to the high number of alleles that have been identified so far: 46 in the DQA region and 160 in the DQB region (as of IMGT/HLA Database 10/2011 release). In the reported work, the development of a multiplex colorimetric assay for the low to medium HLA typing of the DQ2 and DQ8 genes is presented. The optimisation of probe design and assay conditions, performed by both surface plasmon resonance and enzyme-linked oligonucleotide assay, are reported. Finally, the performances of the developed typing platform were validated by the analysis of real patient samples and HLA typing, compared with those obtained using hospital based typing technology and an excellent correlation obtained.     

Experimental humidity dependency of small particle adhesion on silica and titania

The humidity present in ambient atmosphere affects the adhesion of small particles by causing capillary bridge formation between the particle and the surface. Even in moderate relative humidities this, usually attractive, force can have a significant effect on adhesion behaviour of micro and sub-micro particles. We have directly measured the pull-off forces of initially adhered oxide particles on oxide surfaces with atomic force microscope in controlled atmosphere with adjustable humidity. We demonstrate the effect of the surface roughness resulting in two different regions of capillary formation and the particle shape having a strong effect on the humidity dependency of adhesion. The experimental results are explained by theoretical framework.     

19F single-quantum and 19F-33S heteronuclear multiple-quantum coherence NMR of SF6 in thermotropic nematogens and in the gas phase

(19)F single-quantum (SQC) and (19)F-(33)S heteronuclear multiple-quantum coherence (HMQC) NMR spectroscopy of sulfur hexafluoride (SF(6)) dissolved in thermotropic liquid crystals (TLCs) were used to investigate the properties of TLCs. On one hand, environmental effects on the NMR parameters of SF(6), (19)F nuclear shielding, (19)F-(33)S spin-spin coupling, secondary isotope effects of sulfur on (19)F shielding, and the self-diffusion coefficient in the direction of the external magnetic field were studied as well. The temperature dependence of the (19)F shielding of SF(6) in TLCs was modeled with a function that takes into account the properties of both TLC and SF(6). It appears that the TLC environment deforms the electronic system of SF(6) so that the (19)F shielding tensor becomes slightly anisotropic, with the anisotropy being from -0.5 to -1.4 ppm, depending upon the TLC solvent. On the contrary, no sign of residual dipolar coupling between (19)F and (33)S was found, meaning that the so-called deformational effects, which arise from the interaction between vibrational and reorientational motions of the molecule, on the geometry of the molecule are insignificant. Diffusion activation energies, E(a), were determined from the temperature dependence of the self-diffusion coefficients. In each TLC, E(a) increases when moving from an isotropic phase to a nematic phase. The spin-spin coupling constant, J((19)F,(33)S), increases by ca. 10 Hz when moving from the gas phase to TLC solutions. The secondary isotope shifts of (19)F shielding are practically independent of TLC solvent and temperature. For the first time, (19)F-(33)S heteronuclear multiple-quantum NMR spectra were recorded for SF(6) in the gas phase and in a liquid-crystalline solution.     

Synthesis and hydrolysis behaviour of poly(ester anhydrides) from polylactone precursors containing alkenyl moieties

Hydroxyl-group functional polylactones were prepared and converted to acid- terminated polyesters in a reaction with a series of alkenylsuccinic anhydrides containing 8, 12, or 18 carbons in their alkenyl chains. These polyester precursors were then linked into higher molecular weight poly(ester anhydrides) containing alkenyl moieties in their polyester blocks. The hydrolysis behaviour of the poly(ester anhydrides) was found to depend on the thermal properties of the polyester precursors. For poly(ester anhydrides) prepared from low molecular weight prepolymers with thermal transitions below 37 degrees C, the presence of hydrophobic alkenyl chains in the polyester precursors slowed the rate of weight loss. Poly(ester anhydrides) prepared from higher molecular weight prepolymers showed the opposite weight-loss behaviour; i.e., the crystallinity and thermal transitions of the alkenyl chain-containing poly(ester anhydrides) were low, and the weight loss was faster than for poly(ester anhydrides) without the alkenyl chains. The differences in length of the alkenyl chain, as such, had little effect on the hydrolysis behaviour and thermal properties of the poly(ester anhydrides).     

Normal covariant quantization maps

We consider questions related to quantizing complex valued functions defined on a locally compact topological group. In the case of bounded functions, we generalize R. Werner's approach to prove the characterization of the associated normal covariant quantization maps.     

Algebraic derivation of discrete absorbing boundary conditions for the wave equation

Summary. We introduce a new algebraic framework to derive discrete absorbing boundary conditions for the wave equation in the one-dimensional case. The idea is to factor directly the discrete wave operator and then use one of the factors as boundary condition. We also analyse the stability of the schemes obtained this way and perform numerical simulations to estimate their practical value. Received June 14, 1997 / Revised version received September 15, 1997