Synthesis of two new linear trinuclear Cu(II) complexes: mechanism of magnetic coupling through hybrid B3LYP functional and CShM studies

Two new Cu(II) linear trinuclear Schiff base complexes, [Cu3(L)2(CH3COO)2] (1) and [Cu3(L)2(CF3COO)2] (2), have been prepared using a symmetrical Schiff base ligand H2L [where H2L = N,N'-bis(2-hydroxyacetophenone)propylenediimine]. Both of the complexes have been characterized by elemental analyses, Fourier transform IR, UV/vis, and electron paramagnetic resonance spectroscopy. Single-crystal X-ray structures show that the adjacent Cu(II) ions are linked by double phenoxo bridges and a mu(2)-eta(1):eta(1) carboxylato bridge. In each complex, the central copper atom is located in an inversion center with distorted octahedral coordination geometry, while the terminal copper atoms have square-pyramidal geometry. Cryomagnetic susceptibility measurements over a wide range of temperature exhibit a distinct antiferromagnetic interaction of J = -36.5 and -72.3 cm(-1) for 1 and 2, respectively. Density functional theory calculations (B3LYP functional) and continuous-shape measurement (CShM) studies have been performed on the trinuclear unit to provide a qualitative theoretical interpretation of the antiferromagnetic behavior shown by the complexes.     

Dinucleosides with non-natural backbones: a new class of ribonuclease A and angiogenin inhibitors

Ribonuclease?A (RNase A) serves as a convenient model enzyme in the identification and development of inhibitors of proteins that are members of the ribonuclease superfamily. This is principally because the biological activity of these proteins, such as angiogenin, is linked to their catalytic ribonucleolytic activity. In an attempt to inhibit the biological activity of angiogenin, which involves new blood vessel formation, we employed different dinucleosides with varied non-natural backbones. These compounds were synthesized by coupling aminonucleosides with dicarboxylic acids and amino- and carboxynucleosides with an amino acid. These molecules show competitive inhibition with inhibition constant (K(i)) values of (59±3) and (155±5) μM for RNase A. The compounds were also found to inhibit angiogenin in a competitive fashion with corresponding K(i) values in the micromolar range. The presence of an additional polar group attached to the backbone of dinucleosides was found to be responsible for the tight binding with both proteins. The specificity of different ribonucleolytic subsites were found to be altered because of the incorporation of a non-natural backbone in between the two nucleosidic moieties. In spite of the replacement of the phosphate group by non-natural linkers, these molecules were found to selectively interact with the ribonucleolytic site residues of angiogenin, whereas the cell binding site and nuclear translocation site residues remain unperturbed. Docked conformations of the synthesized compounds with RNase A and angiogenin suggest a binding preference for the thymine-adenine pair over the thymine-thymine pair.     

Isolation of (CO)1- and (CO2)1- radical complexes of rare earths via Ln(NR2)3/K reduction and [K2(18-crown-6)2]2+ oligomerization

Deep-blue solutions of Y(2+) formed from Y(NR(2))(3) (R = SiMe(3)) and excess potassium in the presence of 18-crown-6 at -45 °C under vacuum in diethyl ether react with CO at -78 °C to form colorless crystals of the (CO)(1-) radical complex, {[(R(2)N)(3)Y(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 1. The polymeric structure contains trigonal bipyramidal [(R(2)N)(3)Y(μ-CO)(2)](2-) units with axial (CO)(1-) ligands linked by [K(2)(18-crown-6)(2)](2+) dications. Byproducts such as the ynediolate, [(R(2)N)(3)Y](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 2, in which two (CO)(1-) anions are coupled to form (OC≡CO)(2-), and the insertion/rearrangement product, {(R(2)N)(2)Y[OC(═CH(2))Si(Me(2))NSiMe(3)]}[K(18-crown-6)], 3, are common in these reactions that give variable results depending on the specific reaction conditions. The CO reduction in the presence of THF forms a solvated variant of 2, the ynediolate [(R(2)N)(3)Y](2)(μ-OC≡CO)[K(18-crown-6)(THF)(2)](2), 2a. CO(2) reacts analogously with Y(2+) to form the (CO(2))(1-) radical complex, {[(R(2)N)(3)Y(μ-CO(2))(2)][K(2)(18-crown-6)(2)]}(n), 4, that has a structure similar to that of 1. Analogous (CO)(1-) and (OC≡CO)(2-) complexes of lutetium were isolated using Lu(NR(2))(3)/K/18-crown-6: {[(R(2)N)(3)Lu(μ-CO)(2)][K(2)(18-crown-6)(2)]}(n), 5, [(R(2)N)(3)Lu](2)(μ-OC≡CO){[K(18-crown-6)](2)(18-crown-6)}, 6, and [(R(2)N)(3)Lu](2)(μ-OC≡CO)[K(18-crown-6)(Et(2)O)(2)](2), 6a.     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

Oxidative Rearrangement of Substituted Arylalkyl Ketones with Thallium (III) Nitrate: Synthesis of 2,7-Dihydroxycadalene

Synthesis of methyl 2-(3′-methoxy-4′-methylphenyl)-propionate via the T1(NO₃)₃-induced oxidative rearrangement of 3′-methoxy-4′-methylpropiophenone.     

Mannose‐based graft polyesters with tunable binding affinity to concanavalin A

Glycopolymers have been widely used to understand the interactions between carbohydrates and lectins, which facilitate the diagnosis and detection of disease and pathogens as well as the development of vaccines. While studies have been focused on the correlation of glycopolymer structure and their binding to lectins, graft‐type glycopolyesters are uncommon. Herein, we report the design and synthesis of mannose‐based graft polyesters by “grafting‐from” method and investigate their interactions with Concanavalin A (Con A). As confirmed by ¹H NMR spectroscopy and sulfuric acid‐UV method, graft polyesters with different lengths of mannose graft were successfully synthesized. Our results from turbidimetry binding assay showed that graft polyesters with longer mannose graft exhibit higher initial binding rate (k_i). Isothermal titration calorimetry measurements of these graft polyesters with Con A showed that polymers exhibit higher binding affinity (k_a) with the number of side chain mannose. This study provides understanding of the interaction between Con A and mannose‐based graft polyesters, which can be employed for the development of glycopolymeric therapeutics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3908–3917     

Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.     

Ruthenium(IV) pyrochlore oxides: Realization of novel electronic properties through substitution at A- and B-sites

We describe an exploratory investigation of the structure and electronic properties of new ruthenium(IV) pyrochlore oxides and their manganese-substituted derivatives. Our investigations have revealed several, hitherto unreported, electronic ground states for these materials: a metallic and Pauli paramagnetic state for BiPbRu₂O_6.5 that turns into a semiconducting ferromagnetic spin-glass state at 50 K for BiPbRuMnO_6.5; a metallic state that likely shows a charge density wave (CDW) instability at 50–225 K for Bi_1.50Zn_0.50Ru₂O_6.75 that is suppressed by manganese substitution in Bi_1.50Zn_0.50Ru_1.75Mn_0.25O_6.50; and a metallic ferromagnetic spin-glass like state for Pb₂Ru_1.75Mn_0.25O_6.15. The results indeed affirm the richness of the electronic properties of ruthenium-based metal oxides.     

The Design of 3D-Printed Polylactic Acid–Bioglass Composite Scaffold: A Potential Implant Material for Bone Tissue Engineering

Bio-based and patient-specific three-dimensional (3D) scaffolds can present next generation strategies for bone tissue engineering (BTE) to treat critical bone size defects. In the present study, a composite filament of poly lactic acid (PLA) and 45S5 bioglass (BG) were used to 3D print scaffolds intended for bone tissue regeneration. The thermally induced phase separation (TIPS) technique was used to produce composite spheres that were extruded into a continuous filament to 3D print a variety of composite scaffolds. These scaffolds were analyzed for their macro- and microstructures, mechanical properties, in vitro cytotoxicity and in vivo biocompatibility. The results show that the BG particles were homogeneously distributed within the PLA matrix and contributed to an 80% increase in the mechanical strength of the scaffolds. The in vitro cytotoxicity analysis of PLA-BG scaffolds using L929 mouse fibroblast cells confirmed their biocompatibility. During the in vivo studies, the population of the cells showed an elevated level of macrophages and active fibroblasts that are involved in collagen extracellular matrix synthesis. This study demonstrates successful processing of PLA-BG 3D-printed composite scaffolds and their potential as an implant material with a tunable pore structure and mechanical properties for regenerative bone tissue engineering.