Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Spectral Properties of Thioflavin T and Its Complexes with Amyloid Fibrils

Comparative analysis of the absorption and fluorescence spectra and fluorescence excitation spectra of thioflavin T (ThT) in various solvents and in the composition of amyloid fibrils has shown that ThT, when excited in the region of the long-wavelength absorption band, fluoresces in the spectral region with a maximum at 478–484 nm. The appearance in aqueous and alcohol solutions of a fluorescence band with a maximum near 440 nm has been attributed to the presence in the composition of the ThT preparations of an impurity with an absorption band in the 340–350-nm range. The literature data showing that in glycerol ThT has a wide fluorescence spectrum with two maxima are due to the artifact connected with the use of a high concentration of the dye. It has been suggested that the cause of the low quantum yield of ThT aqueous and alcohol solutions is the breakage of the system of conjugated bonds due to the reorientation of the benzothiozole and benzaminic rings of ThT in the excited state with respect to one another. The main factor determining the high quantum yield of fluorescence of ThT incorporated in fibrils is the steric restriction of the rotation of the rings about one another under these conditions. The suggestions made have been verified by the quantum-chemical calculation of the ThT molecule geometry in the ground and excited states.     

Constructing Space for Science at the Royal Institution of Great Britain

Those who have worked in the Royal Institution of Great Britain have, since its foundation in 1799, made significant contributions to scientific knowledge, to its practical application, and to its communication to a wide variety of audiences. Such work cannot be carried out in an architectural vacuum, and in this paper we examine how the buildings of the Royal Institution, 20 and 21 Albemarle Street in central London, have shaped the work undertaken within its walls and how, on a number of occasions, the buildings have been reconfigured to take account of the evolving needs of scientific research and communication. This paper is based on the Conservation Plan of the Royal Institution that we wrote during 2003. The Conservation Plan did not examine the land owned by the Royal Institution to the north (i.e., 22 and 23 Albemarle Street; for this area see Richard Garnier, “Grafton Street, Mayfair,” Georgian Group Journal 13 (2003), 210–272), but it did discuss 18 and 19 Albemarle Street. In this paper we concentrate on the core Royal Institution buildings at 20 and 21 Albemarle Street. Other studies of the relationship of architecture,space, and science include Crosbie Smith and Jon Agar, ed., Making Space for Science: Territorial Themes in the Shaping of Knowledge (Basingstoke: Macmillan, 1997); Peter Galison and Emily Thompson, ed., The Architecture of Science (Cambridge, Mass.: MIT Press, 1999); and Sophie Forgan,“The architecture of science and the idea of a university,” Studies in History and Philosophy of Science 20 (1989), 405–434. Frank A.J.L. James is Professor of the History of Science at the Royal Institution; he has written widely on the history of nineteenth-century science in its social and cultural contexts and is editor of the Correspondence of Michael Faraday. He is President of the British Society for the History of Science. Anthony Peers is an Associate of Rodney Melville and Partners where he works in the field of building conservation as an architectural historian. He is a Council member of the Ancient Monument Society.     

Letter: Interpolating Between the Bose-Einstein and the Fermi-Dirac Distributions in Odd Dimensions

We consider the response of a uniformly accelerated monopole detector that is coupled to a superposition of an odd and an even power of a quantized, massless scalar field in flat spacetime in arbitrary dimensions. We show that, when the field is assumed to be in the Minkowski vacuum, the response of the detector is characterized by a Bose-Einstein factor in even spacetime dimensions, whereas a Bose-Einstein as well as a Fermi-Dirac factor appear in the detector response when the dimension of spacetime is odd. Moreover, we find that, it is possible to interpolate between the Bose-Einstein and the Fermi-Dirac distributions in odd spacetime dimensions by suitably adjusting the relative strengths of the detector's coupling to the odd and the even powers of the scalar field. We point out that the response of the detector is always thermal and we, finally, close by stressing the apparent nature of the appearance of the Fermi-Dirac factor in the detector response.     

Possibility of observing chiral-symmetry effects in ferromagnetic nanoparticles

The statistics of left-and right-handed vortical magnetization states in a system of submicron-sized ferromagnetic disks is studied experimentally. Lattices of elliptic cobalt particles with a planar size of 750 × 450 nm and a thickness of 25 nm were formed using high-resolution electronic lithography. To visualize the magnetization distributions in the disks, magnetic force microscopy was used. The experimental results indicate the conservation of magnetic chiral symmetry in cobalt ferromagnetic particles of the above size and shape.     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

Micromagnetic analysis of transition noise for high-density perpendicular recording

In this paper, specific issues related to high-density perpendicular magnetic recording processes, such as transition noise properties and cross-track correlation lengths, were investigated with the help of micromagnetic analysis. The effects of media parameters were taken into consideration, including intergranular exchange coupling, and exchange distribution, irregular grain shapes, magnetization saturation distribution, and anisotropy distribution. The micromagnetic simulation results showed that the effect of anisotropy distribution on transition noise is more significant than magnetization saturation distribution, and it is crucial to reduce this effect to achieve a high signal-to-noise ratio. Additionally, a new method to further estimate the partial erasure threshold was proposed to approximate the partial erasure effects, and the relation between the microtrack jitter and total track jitter was investigated.