Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Response surface methodology for the microwave-assisted extraction of insecticides from soil samples

The extraction of two pyrethroid insecticides (deltamethrin and α-cypermethrin) together with three organophosphorus insecticides (dimethoate, diazinon and malathion) from soil samples was carried out with microwave-assisted technology. Experimental designs showed that extraction temperature, addition of water to the extractant and solvent/soil ratio were the variables that affected the recoveries of the pesticide the most. Response surface methodology was applied to find the optimum values of the variables involved in the extractions of the analytes. In addition, in order to achieve near-optimal extraction conditions, a desirability function was used to optimize the five pesticides simultaneously. The optimized conditions were applied to different types of soils.     

A Cyclic and Polymeric Phosphazene as Solid State Template for the Formation of RuO<Subscript>2</Subscript> Nanoparticles

Pyrolysis of the organometallic polymer: {{[N=P(R₁)]_0.8[N=P(OC₆H₄CH₂CN[Ru])₂]_0.15[N=P((OC₆H₅)(OC₆H₄CH₂CN[Ru]]_0.05}{Cl}_0.31} _n , [Ru]=CpRu(PPh₃)₂, R₁ = O₂C₁₂H₈ (1) as well of the cyclic specie {N₃P₃ (OC₆H₅)₅(OC₆H₄CH₂CN[Ru])}{PF₆} (2) under a flow of air at 800°C affords nanostructured RuO₂. Nanoparticles near to 10 nm were observed. The differences in the use of cyclic or polymeric phosphazenes, as solid state template, influence strongly the morphology and slightly the composition of the pyrolytic product. Temperature variable (SQUID) measurements in the range of 5–300 K of the material obtained from the polymer, indicate an antiferromagnetic interaction between the Ru atoms, although lower than that found for the crystalline ruthenium oxide, probably due to some amorphous product present in the pyrolytic material. The possible formation mechanism is discussed and the differences in using the cyclic or the polymeric compound as precursor is analyzed in terms of the relative content of Ru to P, N. A general formation method of nanostructured metal oxides is proposed.     

Quantum effects in ice Ih

Quantum and classical simulations are carried out on ice Ih over a range of temperatures utilizing the TIP4P water model. The rigid-body centroid molecular dynamics method employed allows for the investigation of equilibrium and dynamical properties of the quantum system. The impact of quantization on the local structure, as measured by the radial and spatial distribution functions, as well as the energy is presented. The effects of quantization on the lattice vibrations, associated with the molecular translations and librations, are also reported. Comparison of quantum and classical simulation results indicates that shifts in the average potential energy are equivalent to rising the temperature about 80 K and are therefore non-negligible. The energy shifts due to quantization and the quantum mechanical uncertainties observed in ice are smaller than the values previously reported for liquid water. Additionally, we carry out a comparative study of melting in our classical and quantum simulations and show that there are significant differences between classical and quantum ice.     

Room temperature phosphorescence of 1-naphtalenacetamide included in beta-cyclodextrin in presence of 1,3-dibromopropane

The spectral characteristics of the inclusion of 1-naphthalenacetamide in beta-cyclodextrin have been studied by luminescence methods. The addition of bromoalcohols or bromoalkanes produces a decrease of the fluorescence of the inclusion complex, giving rise to a new band corresponding to phosphorescence emission. The emission intensity is much higher in the presence of bromoalkanes than in the presence of bromoalcohols. The deoxygenation of the solutions is achieved by flowing nitrogen, by the addition of sodium sulphite and by a combination of both methods, which results in the most effective approach. The phosphorescence emission is produced in the turbid suspension formed in the presence of the bromoalkane. The formation of microcrystals seems necessary to obtain phosphorescence emission from the ternary system.     

Detection of NAD+-dependent alcohol dehydrogenase activities in YR-1 strain of Mucor circinelloides, a potential bioremediator of petroleum contaminated soils

Different soluble NAD⁺-dependent alcohol dehydrogenase (ADH) isozymes were detected in cell-free homogenates from aerobically grown mycelia of YR-1 strain of Mucor circinelloides isolated from petroleumcontaminated soil samples. Depending on the carbon source present in the growth media, multiple NAD⁺-dependent ADHs were detected when hexadecane or decane was used as the sole carbon source in the culture media. ADH activities from aerobically or anaerobically grown mycelium or yeast cells, respectively, were detected when growth medium with glucose added was the sole carbon source; the enzyme activity exhibited optimum pH for the oxidation of different alcohols (methanol, ethanol, and hexadecanol) similar to that of the corresponding aldehyde (≈7.0). Zymogram analysis conducted with partially purified fractions of extracts from aerobic mycelium or anaerobic yeast cells of the YR-1 strain grown in glucose as the sole carbon source indicated the presence of a single NAD⁺-dependent ADH enzyme in each case, and the activity level was higher in the yeast cells. ADH enzyme from mycelium grown in different carbon sources showed high activity using ethanol as substrate, although higher activity was displayed when the cells were grown in hexadecane as the sole carbon source. Zymogram analysis with these extracts showed that this particular strain of M. circinelloides has four different isozymes with ADH activity and, interestingly, one of them, ADH4, was identified also as phenanthrene-diol-dehydrogenase, an enzyme that possibly participates in the aromatic hydrocarbon biodegradation pathway.     

Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.     

Are electrocyclization reactions of (3Z)-1,3,5-hexatrienone and nitrogen derivatives pseudopericyclic? A DFT study

[reactions: see text] Electrocyclization reactions of (3Z)-1,3,5-hexatrienone and nitrogen derivatives were studied by performing density functional theory (DFT) calculations together with the 6-31+G* basis set. Reactants, products, and transition states for each reaction were localized and the IRC connecting reactants and products was also obtained. Magnetic properties were evaluated along the reaction path to elucidate the characteristics of the reactions studied. As obtained from the calculations, electrocyclization of (3Z)-1,3,5-hexatrienone is a pericyclic process, as indicated by a variety of indexes, such as Nucleus Independent Chemical Shift (NICS), anisotropy of the magnetic susceptibility, or anisotropy of the current-induced density (ACID). This reaction presents characteristics of pericyclic reactions despite the activation energy lowering relative to the electrocyclization of (4Z)-1,2,4,6-heptatetraene, and the relatively small NICS values observed in the transition state. Magnetic properties indicate that an enhancement of the aromaticity relative to reactants and products occurs revealing the absence of orbital disconnections on the cyclic loop of interacting orbitals. Only two reactions among those studied exhibit pseudopericyclic character due to the in-plane attack of the lone pair on nitrogen. In these cases, the reactions showed no barrier for the electrocyclization process, and no aromaticity enhancement was observed.     

The use of emulsions for the determination of methylmercury and inorganic mercury in fish-eggs oil by cold vapor generation in a flow injection system with atomic absorption spectrometric detection

An on-line time based injection system used in conjunction with cold vapor generation atomic absorption spectrometry and microwave-aided oxidation with potassium persulfate has been developed for the determination of the different mercury species in fish-eggs oil samples. A three-phase surfactant-oil-water emulsion produced an advantageous flow when a peristaltic pump was used to introduce the highly viscous sample into the system. The optimum proportion of the oil-water mixture ratio was 2:3 v/v with a Tween 20 surfactant concentration in the emulsion of 0.008% v/v. Inorganic mercury was determined after reduction with sodium borohydride while total mercury was determined after an oxidation step with persulfate prior to the reduction step to elemental mercury with the same reducing agent. The difference between total and inorganic mercury determined the organomercury content in samples. A linear calibration graph was obtained in the range 0.1-20 micrograms l-1 of Hg2+ by injecting 0.7 ml of samples. The detection limits based on 3 sigma of the blank signals were 0.11 and 0.12 microgram l-1 for total and inorganic mercury, respectively. The relative standard deviation of ten independent measurements were 2.8 and 2.2% for 10 micrograms l-1 and 8.8 and 9.0% for 0.1 microgram l-1 amounts of total and inorganic mercury, respectively. The recoveries of 0.3, 0.6 and 8 micrograms l-1 of inorganic and organic mercury added to fish-eggs oil samples ranged from 93.0 to 94.8% and from 100 to 106%, respectively. Good agreement with those values obtained for total mercury content in real samples by electrothermal atomic absorption spectrometry was also obtained, differences between mean values were < 7%. With the proposed procedure, 22 proteropterous catfish-eggs oil samples from the northwestern coast of Venezuela were measured; while the organic mercury lay in the range 2.0 and 3.3 micrograms l-1, inorganic mercury was not detected.     

Excess enthalpies of ethylbenzene + alkane systems at 25°C. An interpretation in terms of the Prigogine-Flory-Patterson model

The molar excess enthalpies for the ethylbenzene + n-decane and ethylbenzene + n-tetradecane systems have been measured at 25°C over the complete concentration range. These results and others from the literature for alkanes + ethylbenzene, and alkanes + toluene have been discussed in terms of the Prigogine-Flory-Patterson theory.