Carboxylate-bridged copper(II)-lanthanide(III) complexes [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n)(Ln = Dy,Ho, Er,Y; oda = oxydiacetate)

The hydrothermal reaction of Ln(2)O(3) (Ln = Dy and Ho), Cu(OAc)(2).2H(2)O, and oxydiacetic acid in the approximate mole ratio of 1:3:8 resulted in the formation of two new members of the isostructural series of polymers formulated as [(Cu(3)Ln(2)(oda)(6)(H(2)O)(6)).12H(2)O](n), crystallizing in the hexagonal crystal system, space group P6/mcc (No. 192). Temperature-dependent magnetic susceptibilities and EPR spectra are reported for the heterometallic compounds Cu-Dy 1, Cu-Ho 2, Cu-Er 3, and Cu-Y 4. The results are discussed in terms of the structure of the compounds, the electronic properties of the lanthanide ions, and the exchange interactions between the magnetic ions.     

Micellar electrokinetic capillary chromatography for the determination of Viagra and its metabolite (UK-103,320) in human serum

Micellar electrokinetic capillary chromatography (MEKC) was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320) in human serum in a concentration range of clinical interest. For MEKC, human serum samples spiked with SC and UK were obtained directly after elution with methanol from a tC18 cartridge. The extract was evaporated and regenerated in a solution 1 mM of phosphate buffer (pH 12.3) which contained a methanol percentage of 20% that was analyzed using phosphate buffer (pH 12.3, 10 mM) containing 30 mM sodium dodecyl sulfate (SDS) as separation electrolyte and a fused-silica capillary. This method gave satisfactory interday precision with respect to migration times relative standard deviation (RSD < 1%) and linear responses for the concentration ranges investigated (0.50-3.50 mg L(-1) for the compound SC and 0.90-4.60 mg L(-1) for UK). An intraday RSD (n = 5 graphs) between the slopes of the calibration graphs was acceptable (6.40%) for SC and (3.37%) for UK. A satisfactory interday precision between slopes was also obtained (RSD 4.10% for SC and a RSD 2.72% for UK) which demonstrated the ruggedness of this method. Detection limits (S/N = 3) were about 200 ng/mL for both compounds in human serum. MEKC was shown as a good method with regards to simplicity, precision and sensitivity.     

A density functional theory study on the electrocyclization of 1,2,4,6-heptatetraene analogues: converting a pericyclic to a pseudopericyclic reaction

A comprehensive B3LYP/6-31+G* study on the electrocyclization of 1,2,4,6-heptatetraene analogues was conducted. Starting from the cyclization of (2Z)-2,4,5-hexatrienal, a pericyclic disrotatory process favored by the assistance of a electron lone pair, we incorporated small modifications in its molecular structure to obtain a truly pseudopericyclic process. To this purpose electronegative atoms (fluorine and nitrogen) were added to give a more electrophilic character on the carbon atom which is attacked by the electron lone pair of the oxygen atom. The complete pathway for each reaction was determined, and changes in magnetic properties were monitored with a view to estimating the aromatization associated with each process. This information, together with the energetic and structural results, allowed us to classify the reactions as pseudopericyclic or pericyclic. Among all studied reactions only one was a truly pseudopericyclic process and another was a borderline case. The features of this unequivocally pseudopericyclic case were analyzed in depth.     

A Cyclic and Polymeric Phosphazene as Solid State Template for the Formation of RuO<Subscript>2</Subscript> Nanoparticles

Pyrolysis of the organometallic polymer: {{[N=P(R₁)]_0.8[N=P(OC₆H₄CH₂CN[Ru])₂]_0.15[N=P((OC₆H₅)(OC₆H₄CH₂CN[Ru]]_0.05}{Cl}_0.31} _n , [Ru]=CpRu(PPh₃)₂, R₁ = O₂C₁₂H₈ (1) as well of the cyclic specie {N₃P₃ (OC₆H₅)₅(OC₆H₄CH₂CN[Ru])}{PF₆} (2) under a flow of air at 800°C affords nanostructured RuO₂. Nanoparticles near to 10 nm were observed. The differences in the use of cyclic or polymeric phosphazenes, as solid state template, influence strongly the morphology and slightly the composition of the pyrolytic product. Temperature variable (SQUID) measurements in the range of 5–300 K of the material obtained from the polymer, indicate an antiferromagnetic interaction between the Ru atoms, although lower than that found for the crystalline ruthenium oxide, probably due to some amorphous product present in the pyrolytic material. The possible formation mechanism is discussed and the differences in using the cyclic or the polymeric compound as precursor is analyzed in terms of the relative content of Ru to P, N. A general formation method of nanostructured metal oxides is proposed.     

Photochemically induced fluorescence investigation of aβ-cyclodextrin: Azure A inclusion complex and determination of analytical parameters

The photooxidation of Azure A and fluorescence properties of Azure A and its photoproduct have been investigated in aqueous media and in the presence of-cyclodextrin (-CD). The fluorescence intensity of the complex formed between the photoproduct and -CD was found to be three times higher than that of the uncomplexed Azure A photoproduct. A complex formation constant of 110±40 M^–1 was calculated using the Benesi-Hildebrand treatment of the fluorescence emission data. Although the stoichiometry of the Azure A photoproduct: -CD complex was found to be 1: 1, it seems that the Azure A structure is only partially included. Calibration graphs were plotted for the free Azure A photoproduct and the photogenerated product included in -CD. The analytical parameters and quantification limits were determined.     

Excess magnitudes for the benzene + n-dodecane system at 298.15 and 323.15 K

The vapor pressures for benzene + n-dodecane mixtures have been measured using a static apparatus. Values for the excess Gibbs energy have been calculated using a modified form of Barker's method and fitted to a Padé approximant equation. Selection of the most adequate approximant is made according to objective criteria. The results are compared with those corresponding to other benzene + n-alkane systems. The values for the activity coefficient of benzene at infinite dilution calculated from these data agrees very well with the values obtained by gas-liquid chromatography.     

Results of three years of monitoring239,240Pu and238Pu concentrations in airborne effluents from the V-1 nuclear power plant with VVER 440 reactors in Jaslovské Bohunice in Czechoslovakia

The concentration of^239,240Pu and²³⁸Pu in airborne effluents in the years 1985–1987 from two reactors VVER 440/total power of 880 MW/ of a nuclear power plant V-1 in Jaslovské Bohunice in Czechoslovakia, was determined. The concentration of^239,240Pu in effluents ranged from 1.0 to 30.8 Bq.m^–3 and of²³⁸Pu from 1.6 to 41.1 Bq.m^–3. The activity ratio²³⁸Pu/^239,240Pu in airborne effluents kept within the range of 1.0–2.4. Total annual discharged activities of^239,240Pu in 1985, 1986 and 1987 were 28.5, 12.7 and 12.2 kBq, respectively. Total annual discharged activities of²³⁸Pu in 1986 and 1987 were 16.6 and 15.1 kBq, respectively.     

Are electrocyclization reactions of (3Z)-1,3,5-hexatrienone and nitrogen derivatives pseudopericyclic? A DFT study

[reactions: see text] Electrocyclization reactions of (3Z)-1,3,5-hexatrienone and nitrogen derivatives were studied by performing density functional theory (DFT) calculations together with the 6-31+G* basis set. Reactants, products, and transition states for each reaction were localized and the IRC connecting reactants and products was also obtained. Magnetic properties were evaluated along the reaction path to elucidate the characteristics of the reactions studied. As obtained from the calculations, electrocyclization of (3Z)-1,3,5-hexatrienone is a pericyclic process, as indicated by a variety of indexes, such as Nucleus Independent Chemical Shift (NICS), anisotropy of the magnetic susceptibility, or anisotropy of the current-induced density (ACID). This reaction presents characteristics of pericyclic reactions despite the activation energy lowering relative to the electrocyclization of (4Z)-1,2,4,6-heptatetraene, and the relatively small NICS values observed in the transition state. Magnetic properties indicate that an enhancement of the aromaticity relative to reactants and products occurs revealing the absence of orbital disconnections on the cyclic loop of interacting orbitals. Only two reactions among those studied exhibit pseudopericyclic character due to the in-plane attack of the lone pair on nitrogen. In these cases, the reactions showed no barrier for the electrocyclization process, and no aromaticity enhancement was observed.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.