Intercomparison between ozone-broadening parameters retrieved from millimetre-wave measurements by using different techniques

For atmospheric purposes, the N₂- and O₂-, or Air-broadenings of selected transitions of ozone have been investigated in the 195-300 K temperature range. More precisely, the following 13 transitions in the 280-345 GHz frequency range have been studied: the 2_2,0 ← 2_1,1 (279.5 GHz), 24_2,22 ← 24_1,23 (286.2 GHz), 3_2,2 ← 3_1,3 (286.3 GHz), 5_2,4 ← 5_1,5 (293.2 GHz), 13_4,10 ← 14_3,11 (300.7 GHz), 14_0,14 ← 13_1,13 (301.8 GHz), 7_2,6 ← 7_1,7 (303.2 GHz), 26_2,24 ← 26_1,25 (315.9 GHz), 5_3,3 ← 6_2,4 (317.2 GHz), 20_1,19 ← 20_0,20 (320.0 GHz), 26_6,20 ← 27_5,23 (343.2 GHz), 26_2,24 ← 25_3,23 (343.2 GHz), and 4_3,1 ← 5_2,4 (343.5 GHz) lines. Systematic errors are known to be the principal error source and recent intercomparisons of line-broadening coefficients showed differences up to 20%, thus a large effort in minimizing systematic error sources has been taken and cross check measurements with different techniques have been carried out. The conclusion of the intercomparison performed indicates an excellent agreement of the results and that an uncertainty less than 3%, which also takes into account the systematic errors, can be claimed for the line-broadening parameters.     

Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 1. Theoretical analysis

With the use of an analytical approach developed, the influence of distribution of a tangential load on the stress concentration in uniaxially tensioned flat specimens of high-strength unidirectional composites near the grips of a testing machine is evaluated. In view of singularity of the analytical solution derived at the points of discontinuity of boundary conditions, for estimating the stress concentration, it is suggested to employ the averaged value of longitudinal stresses, which is calculated by means of an improper integral across the thickness of a near-surface layer. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 6, pp. 787–796, November–December, 2006.     

Asymptotic estimation of states of linear nonautonomous systems with scalar output

For a linear nonautonomous system with one output, the existence conditions for an identifier that estimates the current state with exponential rate are established. An algorithm for constructing such an identifier is described and its dependence on small perturbations of coefficients is studied.     

Multinomial permutations on a circle

Multinomial permutations on a circle are considered in the framework of combinatorics. Different cases are presented and shown to agree with previously derived formula for the number of cyclic necklaces. Two applied examples are discussed with a view to illustrate the implications of derived formulas. Copyright © 2006 John Wiley & Sons, Ltd.     

Mathematical models of innovation diffusion with stage structure

Mathematical models with stage structures are proposed to describe the process of awareness, evaluation and decision-making. First, a system of ordinary differential equations is presented that incorporates the awareness stage and the decision-making stage. If the adoption rate is bilinear and imitations are dominant, we find a threshold above which innovation diffusion is successful. Further, if the adoption rate has a higher nonlinearity, it is shown that there exist bistable equilibria and a region such that an innovation diffusion is successful inside and is unsuccessful outside. Secondly, a model with a time delay is proposed that includes an evaluation stage of a product. It is proved that the system exhibits stability switches. The bifurcation direction of equilibria is also discussed.     

Nano-electrochemical detection of hydrogen or protons using palladium nanoparticles: distinguishing surface and bulk hydrogen.

The benefits of using nanoparticle-modified electrodes are exemplified through the electrochemical detection of protons and/or hydrogen. It is shown that a palladium-nanoparticle-modified boron-doped diamond allows voltammetric information relating to the relative roles played by the surface and the bulk metal to be obtained for the proton-hydrogen system at palladium surfaces which is not accessible using palladium macroelectrodes or microelectrodes.     

Electricity price forecasting through transfer function models

Forecasting electricity prices in presentday competitive electricity markets is a must for both producers and consumers because both need price estimates to develop their respective market bidding strategies. This paper proposes a transfer function model to predict electricity prices based on both past electricity prices and demands, and discuss the rationale to build it. The importance of electricity demand information is assessed. Appropriate metrics to appraise prediction quality are identified and used. Realistic and extensive simulations based on data from the PJM Interconnection for year 2003 are conducted. The proposed model is compared with naïve and other techniques.