Synthesis and Characterization of Dinuclear Ruthenium(II) Complexes Based on 4,4′‐Bipyridyl Type Bridging Ligands

The synthesis, spectroscopic, electrochemical and photophysical characterization of a series of dinuclear ruthenium(II) complexes of the type [(bpy)₂Ru(NnN)₂RuCl(bpy)₂](PF₆)₃, where NnN = 4,4′‐bipyridyl (N0N), 1,2‐bis(4‐pyridyl)ethylene (NEN), 1,2‐bis(4‐pyridyl)ethane (N2N), and 4,4′‐trimethylenedipyridine (N3N) are reported. The photophysical and electrochemical properties are discussed with particular emphasis on the ability of the bridging ligands to support intercomponent interaction.     

Influence of HPAM on W/O emulsion separation properties

The present study reports on the influence of partially hydrolyzed polyacrylamide (HPAM) on essential w/o emulsion properties. The characterization has been undertaken with low field NMR to follow droplet sizes and distributions, sedimentation and coalescence kinetic, bench-scale electrocoalescence (E_crit) experiments to follow emulsion stability changes, and electrorheology to detect changes in the viscosity upon applying an external electric field. The result is that HPAM does not basically influence the droplet size distribution (DSD) and the stability level of the emulsions as can be expected of bulk polymers. However, there seems to be an interaction between added demulsifiers either through direct molecular interaction or via an interfacial complexation.     

Soil stress and compaction effects for four tractor tyres

Compaction effects and soil stresses were examined for four tractor tyres under three inflation pressures: 67, 100 and 150% of the recommended pressure. The four tyres were 18.4 R 38, 520/70 R 38, 600/65 R 38 and 650/60-38 and they carried a wheel load of 2590 kg. The 650/60-38 was a bias-ply tyre while the other three were radial tyres. Increased inflation pressure significantly increased all measured parameters: rut depth, penetration resistance and soil stress at 20 and 40 cm depth. The 18.4 R 38 caused a greater rut depth and penetration resistance than the other tyres, which did not differ significantly from each other. The soil stress was highest for the 18.4 R 38, followed by the 650/60-38. The low-profile tyres decreased compaction compared with the 18.4–38 tyre, mainly by allowing a lower inflation pressure. The use of low-profile tyres did not reduce compaction if not used at a lower inflation pressure. The bias-ply tyre caused a higher stress in the soil than the radial tyres when used with the same inflation pressure, but the compaction effects in terms of rut depth and penetration resistance were not greater for this tyre than for the radial low-profile tyres.     

Methods for in situ spectroscopic probing of the synthesis of a zeolite

Unraveling the crystallization mechanism of zeolites remains an increasingly important challenge in chemistry. During the last decade, in situ spectroscopic methods have provided an unprecedented level of detail of the underlying molecular mechanisms and their kinetics. Magnetic resonance, vibrational and X-ray absorption techniques have emerged as principal tools for the in situ observation of crystallization. In this tutorial review, we discuss how these in situ methods have contributed to our understanding of the complex and diverse molecular processes that govern zeolite crystallization.     

Investigation of the Mechanism of Colloidal Silicalite‐1 Crystallization by Using DLS,SAXS, and 29Si NMR Spectroscopy

Colloidal silicalite‐1 zeolite was crystallized from a concentrated clear sol prepared from tetraethylorthosilicate (TEOS) and aqueous tetrapropylammonium hydroxide (TPAOH) solution at 95 °C. The silicate speciation was monitored by using dynamic light scattering (DLS), synchrotron small‐angle X‐ray scattering (SAXS), and quantitative liquid‐state ²⁹Si NMR spectroscopy. The silicon atoms were present in dissolved oligomers, two discrete nanoparticle populations approximately 2 and 6 nm in size, and crystals. On the basis of new insight into the evolution of the different nanoparticle populations and of the silicate connectivity in the nanoparticles, a refined crystallization mechanism was derived. Upon combining the reagents, different types of nanoparticles (ca. 2 nm) are formed. A fraction of these nanoparticles with the least condensed silicate structure does not participate in the crystallization process. After completion of the crystallization, they represent the residual silicon atoms. Nanoparticles with a more condensed silicate network grow until approximately 6 nm and evolve into building blocks for nucleation and growth of the silicalite‐1 crystals. The silicate network connectivity of nanoparticles suitable for nucleation and growth increasingly resembles that of the final zeolite. This new insight into the two classes of nanoparticles will be useful to tune the syntheses of silicalite‐1 for maximum yield.     

Short and efficient access to imidazo[1,2-a]pyrrolo[3,2-c]pyridine derivatives

Access to N-protected or N-free imidazo[1,2-a]pyrrolo[3,2-c]pyridine derivatives as potential antiviral compounds was achieved in good yields from N-protected 7-amino-8-halo-2-methylimidazo[1,2-a]pyridines by catalytic coupling of terminal acetylenes under mild conditions using [PdCl₂(PPh₃)₂] or [Cu(Phen)(PPh₃)₂]NO₃.     

Ethane/ethene separation turned on its head: selective ethane adsorption on the metal-organic framework ZIF-7 through a gate-opening mechanism

Ethane is selectively adsorbed over ethylene in their mixtures on the zeolite imidazolate framework ZIF-7. In packed columns, this results in the direct production of pure ethylene. This gas-phase separation is attributed to a gate-opening effect in which specific threshold pressures control the uptake and release of individual molecules. These threshold pressures differ for the different molecules, leaving a window of selective uptake operation. This phenomenon makes ZIF-7 a perfect candidate for the separation of olefins from paraffins, since in contrast to most microporous materials, the paraffin is selectively adsorbed. Mixture adsorption, as studied by breakthrough experiments, demonstrates that gate-opening effects can be effectively used to separate molecules of very similar size.     

Fundamentals of melt infiltration for the preparation of supported metal catalysts. The case of Co/SiO2 for Fischer-Tropsch synthesis

We explored melt infiltration of mesoporous silica supports to prepare supported metal catalysts with high loadings and controllable particle sizes. Melting of Co(NO(3))(2)·6H(2)O in the presence of silica supports was studied in situ with differential scanning calorimetry. The melting point depression of the intraporous phase was used to quantify the degree of pore loading after infiltration. Maximum pore-fillings corresponded to 70-80% of filled pore volume, if the intraporous phase was considered to be crystalline Co(NO(3))(2)·6H(2)O. However, diffraction was absent in XRD both from the ordered mesopores at low scattering angles and from crystalline cobalt nitrate phases at high angles. Hence, an amorphous, lower density, intraporous Co(NO(3))(2)·6H(2)O phase was proposed to fill the pores completely. Equilibration at 60 °C in a closed vessel was essential for successful melt infiltration. In an open crucible, dehydration of the precursor prior to infiltration inhibited homogeneous filling of support particles. The dispersion and distribution of Co(3)O(4) after calcination could be controlled using the same toolbox as for preparation via solution impregnation: confinement and the calcination gas atmosphere. Using ordered mesoporous silica supports as well as an industrial silica gel support, catalysts with Co metal loadings in the range of 10-22 wt % were prepared. The Co(3)O(4) crystallite sizes ranged from 4 to 10 nm and scaled with the support pore diameters. By calcination in N(2), pluglike nanoparticles were obtained that formed aggregates over several pore widths, while calcination in 1% NO/N(2) led to the formation of smaller individual nanoparticles. After reduction, the Co/SiO(2) catalysts showed high activity for the Fischer-Tropsch synthesis, illustrating the applicability of melt infiltration for supported catalyst preparation.     

Convenient synthesis of Cu3(BTC)2 encapsulated Keggin heteropolyacid nanomaterial for application in catalysis

Nanomaterial of Cu(3)(BTC)(2) (BTC = benzene tricarboxylic acid) incorporating Keggin heteropolyacid conveniently prepared at room temperature and recovered by freeze drying outperforms ultrastable Y zeolite in acid catalysed esterification reaction.