Ozone production in oxygen by means of F2-laser irradiation at λ=157.6 nm

Ozone is generated in pure oxygen (p5 kPa), synthetic air (p7 kPa) and oxygen-argon mixtures (p3 kPa) by irradiation of these gases with the VUV light of a repetitively pulsed (f _L15 Hz) F₂-laser at =157.6 nm with maximum about 4 mJ/pulse. An absorption photometer measurement operating at 253.7 nm (Hg line) determines the ozone concentration as a function of oxygen and/or additive gas pressure, the repetition frequency of the laser and the wall temperature of the reaction chamber. The temporal development of the ozone concentration as a function of these parameters is calculated by means of rate equations for the species O(³ P), O₂(X ³ _g ^– ), O₃(¹ A ₁), O(¹ D), O₂(a ¹_g), O₂(b ¹ _g ⁺ ) and vibrationally excited O ₃ ^* (¹ A ₁) and the photon distribution. The maximum concentration of O₃ in the sealed-off chamber reaches 1.6% in pure O₂, 4.1% in air and 1.2% in a 1:5 O₂-Ar mixture at 3 kPa. The annihilation of O₃ by the wall and temperature dependent volume processes (300 KT395 K) is studied and the experimental and theoretical results are compared.     

Maskierung mit Kaliumjodid bei direkten Titrationen von Kupfer(II) mit Äthylendiamintetraessigsäure

Zusammenfassung Die Jodidoxydation durch Cu(II) wird in Anwesenheit von Ammoniak, Natriumtartrat, citrat oder -oxalat infolge Komplexbildung verhindert. Daher kann man z. B. Quecksüber(II) in Anwesenheit der genannten Komplexbildner mit Kaliumjodid maskieren und Kupfer(II) durch direkte Titration mit ÄDTA gegen Murexid, Brenzcatechinviolett, Chromazurol S, PAN oder PAR als Indikator bestimmen.

---

Masking with potassium iodide in direct titrations of copper(II) with ethylenediamine tetraacetic acid

Summary The formation of a complex prevents the iodide oxidation by Cu(II) in the presence of ammonia, sodium tartrate, citrate, or oxalate. Hence mercury(II) for instance, can be masked against potassium iodide in the presence of these complex formers, and Cu(II) can be determined by direct titration with EDTA in the presence of murexide, pyrocatechol violet, chromazurol, PAN or PAR as indicator.

     

Photophysical properties of borondipyrromethene analogues in solution

The photophysical properties of seven new 8-(p-substituted)phenyl analogues of 4,4-difluoro-3,5-dimethyl-8-(aryl)-4-bora-3a,4a-diaza-s-indacene (derivatives of the well-known fluorophore BODIPY) in several solvents have been studied by means of absorption and steady-state and time-resolved fluorimetry. For each compound, the fluorescence quantum yield and lifetime are lower in solvents with higher polarity owing to an increase in the rate of nonradiative deactivation. Increasing the electron withdrawing strength of the p-substituent on the phenyl group in position 8 also leads to lower fluorescence quantum yields and lifetimes. When the p-substituent on the phenyl group in position 8 is a tertiary amine [8-(4-piperidinophenyl), 8-(4-N,N-dimethylaminophenyl), and 8-(4-morpholinophenyl)], the low quantum yields of these compounds in more polar solvents can be rationalized by the inversion of the energy levels of an apolar, highly fluorescent and a polar, nonfluorescent excited state, where charge transfer from the tertiary amine to the BODIPY unit occurs. These amine analogues can be protonated at low pH in aqueous solution. Fluorescence titrations yielded pK(a) values of their conjugate ammonium salts which are in agreement with the electron donating tendency of the amine group: piperidino (4.15) > dimethylamino (2.37) > morpholino (1.47), with the pK(a) values in parentheses. The rate constant of radiative deactivation (k(f)) is the same for all compounds in all solvents studied (k(f) = 1.4 x 10(8) s(-1)).     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Use of solvent sorption to detect structural changes in rigid PVC compounds

The effects of type of PVC and its thermal history on solvent sorption behaviour were investigated. Samples were immersed in toluene at 25°C, and the equilibrium solvent uptake and sorption half-times were measured for a variety of samples. The shape of the sorption curve was also observed. Equilibrium sorption was found to decrease with increasing amount of crystallinity in the sample. Sorption half-time increased with increased crystallinity, but minimum equilibrium sorption did not correspond with maximum half-time, possibly due to the type of crystallinity present. The shape of the sorption curve (Fickian or Case II sorption) also depended on the ype of PVC used and is thermal history. The solvent sorption technique was shown to be a sensitive method for detecting small structural changes in PVC.     

organocuprate reactions of enone lactones. I. Synthesis of trans-fused rings via conjugate addition.

Control of the stereochemistry of substituents needed to construct a bicyclic system (e.g. a hydrindanone) is achieved by conjugate addition of an organocuprate to a cyclohexenone made conformationally rigid by the attachment of a 1,3-lactone.     

The search for a new model structure of β-Factor XIIa

We present the search for a new model of -factor XIIa, a blood coagulation enzyme, with an unknown experimental 3D-structure. We decided to build not one but three different models using different homologous proteins as well as different techniques and different modellers. Additional studies, including extensive molecular dynamics simulations on the solvated state, allowed us to draw several conclusions concerning homology modelling, in general, and -factor XIIa, in particular.     

Z/E-photoisomerizations of olefins with 4npi- or (4n + 2)pi-electron substituents: zigzag variations in olefin properties along the T(1) state energy surfaces

[Figure: see text]. A quantum chemical study has been performed to assess changes in aromaticity along the T1 state Z/E-isomerization pathways of annulenyl-substituted olefins. It is argued that the point on the T1 energy surface with highest substituent aromaticity corresponds to the minimum. According to Baird (J. Am. Chem. Soc. 1972, 94, 4941), aromaticity and antiaromaticity are interchanged when going from S0 to T1. Thus, olefins with S0 aromatic substituents (set A olefins) will be partially antiaromatic in T1 and vice versa for olefins with S0 antiaromatic substituents (set B olefins). Twist of the C=C bond to a structure with a perpendicular orientation of the 2p(C) orbitals (3p*) in T1 should lead to regaining substituent aromaticity in set A and loss of aromaticity in set B olefins. This hypothesis is verified through quantum chemical calculations of T1 energies, geometries (bond lengths and harmonic oscillator measure of aromaticity), spin densities, and nucleus independent chemical shifts whose differences along the T1 PES display zigzag dependencies on the number of -electrons in the annulenyl substituent of the olefin. Aromaticity changes are reflected in the profiles of the T1 potential energy surfaces (T1 PESs) for Z/E-isomerizations because olefins in set A have minima at 3p* whereas those in set B have maxima at such structures. The proper combination (fusion) of the substituents of set A and B olefins could allow for design of novel optical switch compounds that isomerize adiabatically with high isomerization quantum yields.     

Lamellar Organo-Bridged Silicones

The acid-hydrolysis of an organo-bridged bisdiethoxysilylated molecular precursor bearing urea groups, (EtO)₂MeSi(CH₂)₃NHCONH(CH₂)₁₂NHCONH(CH₂)₃SiMe(OEt)₂, has been performed in pure aqueous medium. Scanning electron microscopy (SEM) analysis of the resulting insoluble solid revealed plate-like forms with a lamellar structure as determined by powder X-ray diffraction (PXRD) studies with a sharp peak at 28.5 Å. The solid state ²⁹Si MAS-NMR spectrum of this bridged siloxane hybrid is consistent with a moderately condensed material with complete preservation of the Si–C bonds throughout the hybrid network. In comparison, the classical sol–gel hydrolysis-condensation of the molecular precursor in ethanol with stoichiometric amount of water and fluoride anion as catalyst produced an amorphous featureless solid.     

Gas-phase ion/molecule reactions between dimethoxyphosphonium ions and aromatic hydrocarbons

Ion/molecule reactions between O=P(OCH(3))(2)(+) phosphonium ions and six aromatic hydrocarbons (benzene, toluene, 1,2,4-trimethylbenzene, naphthalene, acenaphthylene and fluorene) were performed in a quadrupole ion trap mass spectrometer. The O=P(OCH(3))(2)(+) phosphonium ions, formed by electron impact from neutral trimethyl phosphite, were found to react with aromatic hydrocarbons (ArHs) to give (i) an adduct [ArH, O=P(OCH(3))(2)](+) and (ii) for ArHs which have an ionization energy below or equal to 8.14 eV, a radical cation ArH(+ *) by charge transfer reaction. Collision-induced dissociation experiments, which produce fragment ions other than the O=P(OCH(3))(2)(+) ions, indicate that the adduct ions are covalent species. Isotope-labeled ArHs were used to elucidate fragmentation mechanisms. The charge transfer reactions were investigated using density functional theory at the B3LYP/6-311 + G(3df,2p)//B3LYP/6-31G(d,p) level of theory. The potential energy surface obtained from B3LYP/6-31G(d,p) calculations for the reaction between O=P(OCH(3))(2)(+) and benzene is described.