A hybrid nonaqueous electrochemical supercapacitor using nano-sized iron oxyhydroxide and activated carbon

A beta-iron oxyhydroxide (FeOOH) was synthesized via a hydrolyzing route and investigated as a lithium intercalation host. It delivers a capacity of about 170 mAh/g and exhibits good cycling performance when charged/discharged in the voltage range from 1.6 V to 3.3 V. For the first time we have confirmed that FeOOH is suitable for using it as a negative electrode for hybrid electrochemical supercapacitor assembled with an activated carbon positive electrode in 1.0 M LiPF₆ ethylene carbonate/dimethyl carbonate (EC/DMC, 1:2 in volume) solution. The cell reveals a slightly sloping voltage profile from 0 V to 2.8 V and gives an estimated specific energy of 45 Wh/kg based on the total weight of two electrode materials, approximately two times of carbon/carbon electrochemical double layer capacitors. The hybrid supercapacitor shows a good cycling performance, it remains approximately 96% of initial capacity after 800 cycles at a charge/discharge rate of 4 C. The capacitor also shows a desirable rate capability, even at 10 C discharge rate, it holds 80% of capacity compared with that at 1 C discharge rate.     

Combining the best in triplex recognition: synthesis and nucleic acid binding of a BQQ-neomycin conjugate

Synthesis of a BQQ-neomycin conjugate is reported. The conjugate combines two ligands, one known to intercalate triplexes (BQQ) and another known to bind in the triplex groove (neomycin). The conjugate stabilizes T.A.T, as well as mixed base DNA triplex, better than neomycin, BQQ, or a combination of both. The conjugate selectively stabilizes the triplex (in the presence of physiological salt concentrations), with as little as 4 muM of the ligand leading to a DeltaTm of >60 degrees C. Competition dialysis studies show a clear preference for the drug binding to triplex DNA/RNA over the duplex/single strand structures. Modeling studies suggest a structure of neomycin bound to the larger W-H (Watson-Hoogsteen) groove with BQQ intercalated between the triplex bases.     

Comparison of the volatile constituents of Artemisia capillaris from different locations by gas chromatography-mass spectrometry and projection method

The volatile chemical constituents of Artemisia capillaries (an important traditional Chinese medicine) were determined by gas chromatography-mass spectrometry (GC-MS) and sub-window factor analysis (SFA). Seventy-five components were separated and 43 of them were qualitatively and quantitatively determined, which represented about 89.03% of the total content. This profile was then used to identify and assess the consistency of the herb by using an orthogonal projection method. Four different sources of A. capillaries were analyzed and compared with each other. Among the components determined, there were 51 components coexisting in all samples although the relative peak areas of a few showed variations. It is the first time to apply orthogonal projection method to the comparison of different samples, and it reduces the burden of qualitative analysis as well as the subjectivity. The results showed a fair consistency in their GC-MS fingerprint. A. capillaris was distinguished from Artemisia sacrorum L., a possible substitute in traditional Chinese medicine by comparing the fingerprints with each other.     

Synthesis of 7,9-dideoxybaccatin IV analogs from sinenxan A

Sinenxan A, a taxoid isolated from callus tissue cultures of Taxus yunnanensis was converted into 13-oxo-7,9-dideoxy-2-debenzoyl-2-acetyl-baccatin IV and 7,9-dideoxy-2-debenzoyl-4-deacetyl-baccatin IV, a key framework of 1,7,9-trideoxypaclitaxel. Several special steps in this transformation are worthy of note: (1) deoxygenation by treatment with hypophosphorous acid at C-14 position; (2) a highly regioselective O-deacetylation of taxanes at C-5 position; and (3) stereoselective reduction of the 13-carbonyl group by transannular assistance from the C-4-hydroxyl.     

On the photoreactivity of diacetylene containing thermoplastic block copolymers

A group of block copolymers containing diacetylenes as chain extenders in their hard segments was prepared, based on urethanes, esters, ureas, and amides as hard segments and polybutadienes, polyethers, polyesters, and polysiloxanes as soft segments. Almost all block copolymers were photoreactive, but there was a wide range of sensitivities. The photoreactivity of the copolymers was found to depend on the reactivity of the monomer unit, on the width of the diacetylene stacks in the hard segments, and on the degree of phase separation in the solid films. To explore the range of monomer reactivities we prepared 15 crystalline monomers. Urethanes were in general the most reactive, and this was attributed in part to the specific effect of hydrogen bonding which brings about a shortening of the C₁ to C₄ distance between diacetylenes tend to reduce the photoreactivity. The behavior of identical diacetylene units in the monomer crystal, in the homopolymer, and in the block copolymer is discussed in this paper.     

利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Structure and dynamics of metallomacrocycles: recognition of zinc xylyl-bicyclam by an HIV coreceptor

As platforms for the design of metal-based therapeutic and diagnostic agents, macrocycles are rigid enough to provide strong metal binding sites and orient functional groups stereoselectively, yet flexible enough to accommodate structural changes required for induced-fit recognition of biological targets. We consider the recognition of the Zn(II) complex of the bis-tetraazamacrocycle xylyl-bicyclam, a potent anti-HIV agent, by the coreceptor CXCR4, a G-protein-coupled receptor used by HIV for membrane fusion and cell entry. NMR studies show that the macrocycles of Zn(II)(2)-xylyl-bicyclam perchlorate exist in aqueous solution as two major configurations, trans-I (nitrogen chirality R,S,R,S), and trans-III (S,S,R,R). Acetate addition induced a major structural change. X-ray crystallography shows that the acetate complex contains the unusual cis-V cyclam configuration (R,R,R,R and folded) with bidentate coordination of acetate to Zn(II) plus second-coordination-sphere double H-bond formation between diagonal NH protons on the opposite cyclam face and acetate carboxylate oxygens. Detailed 1D and 2D NMR studies show that the major configuration of Zn(II)(2)-xylyl-bicyclam acetate in aqueous solution is cis-V/trans-I. Molecular modeling shows that an analogous cis-V site can be formed when Zn(II)(2)-xylyl-bicyclam binds to CXCR4, involving the carboxylate groups of Asp262 (Zn(II) coordination) and Glu288 (double H-bonding). The second cyclam can adopt the trans-I (or trans-III) configuration with Zn(II) binding to Asp171. These interactions are consistent with the known structure-activity relationships for bicyclam anti-HIV activity and receptor mutation. Consideration of the anti-HIV activity of xylyl-bicyclam complexes of other metal ions suggests that affinity for carboxylates, configurational flexibility, and kinetic factors may all play roles in receptor recognition. For example, Pd(II) cyclam complexes interact only weakly with axial ligands and are inflexible and inactive, whereas Co(III) cyclams bind carboxylates strongly, are configurationally flexible, and yet have low activity. Our findings should aid the design of new generations of active macrocycles including highly specific chemokine receptor antagonists.     

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …     

Separation, identification, and interaction of heparin oligosaccharides with granulocyte-colony stimulating factor using capillary electrophoresis and mass spectrometry

A capillary electrophoresis (CE) method was developed for the separation of heparin oligosaccharides compatible to study the interactions between the oligosaccharides and granulocyte-colony stimulating factor (G-CSF). Unfractionated heparin was eliminitively degraded to heparin oligosaccharides by an endolytic heparinase. The degraded smaller oligosaccharides (M(r) < 1000) were baseline-separated by CE under a 50 mM phosphate buffer (pH 9.0) in 10 min. Standard heparin disaccharides and larger oligosaccharides (1000 < M(r) < 8000) were all separated under optimized separation conditions. Compared with standard heparin disaccharides, smaller oligosaccharides contained one nonsulfated, two monosulfated, and two disulfated disaccharides, but trisulfated disaccharides were not found. The smaller oligosaccharides were also identified and molecular mass was deduced by electrospray ionization-mass spectrometry (ESI-MS). Furthermore, interactions between G-CSF and the oligosaccharides were studied by using capillary zone electrophoresis (CZE) under the above separation conditions. It was found that larger oligosaccharides could interact with G-CSF while smaller oligosaccharides were not observed to bind to G-CSF under the experimental conditions. In conclusion, the purified heparinase could selectively degrade heparin into oligosaccharides and the interaction between G-CSF and heparin was correlated with the chain length of heparin.