Stabilization and study of SrFe(1-x)Mn(x)O2 oxides with infinite-layer structure

A series of layered oxides of nominal composition SrFe(1-x)Mn(x)O(2) (x = 0, 0.1, 0.2, 0.3) have been prepared by the reduction of three-dimensional perovskites SrFe(1-x)Mn(x)O(3-δ) with CaH(2) under mild temperature conditions of 583 K for 2 days. The samples with x = 0, 0.1, and 0.2 exhibit an infinite-layer crystal structure where all of the apical O atoms have been selectively removed upon reduction. A selected sample (x = 0.2) has been studied by neutron powder diffraction (NPD) and X-ray absorption spectroscopy. Both techniques indicate that Fe and Mn adopt a divalent oxidation state, although Fe(2+) ions are under tensile stress whereas Mn(2+) ions undergo compressive stress in the structure. The unit-cell parameters progressively evolve from a = 3.9932(4) ? and c = 3.4790(4) ? for x = 0 to a = 4.00861(15) ? and c = 3.46769(16) ? for x = 0.2; the cell volume presents an expansion across the series from V = 55.47(1) to 55.722(4) ?(3) for x = 0 and 0.2, respectively, because of the larger effective ionic radius of Mn(2+) versus Fe(2+) in four-fold coordination. Attempts to prepare Mn-rich compositions beyond x = 0.2 were unsuccessful. For SrFe(0.8)Mn(0.2)O(2), the magnetic properties indicate a strong magnetic coupling between Fe(2+) and Mn(2+) magnetic moments, with an antiferromagnetic temperature T(N) above room temperature, between 453 and 523 K, according to temperature-dependent NPD data. The NPD data include Bragg reflections of magnetic origin, accounted for with a propagation vector k = ((1)/(2), (1)/(2), (1)/(2)). A G-type antiferromagnetic structure was modeled with magnetic moments at the Fe/Mn position. The refined ordered magnetic moment at this position is 1.71(3) μ(B)/f.u. at 295 K. This is an extraordinary example where Mn(2+) and Fe(2+) ions are stabilized in a square-planar oxygen coordination within an infinite-layer structure. The layered SrFe(1-x)Mn(x)O(2) oxides are kinetically stable at room temperature, but in air at ~170 °C, they reoxidize and form the perovskites SrFe(1-x)Mn(x)O(3-δ). A cubic phase is obtained upon reoxidation of the layered compound, whereas the starting precursor SrFeO(2.875) (Sr(8)Fe(8)O(23)) was a tetragonal superstructure of perovskite.     

Preparation,characterization and catalytic applications of ZrO<Subscript>2</Subscript> supported on low cost SBA-15

This work presents some applications of ZrO₂ supported over SBA-15 silica as promoter of sulfated zirconia and as support from CuO/CeO₂ catalytic system for preferential oxidation of CO to CO₂ in hydrogen rich streams, used as feed for proton exchange membrane fuel cells (PEMFC). Different amounts of ZrO₂, from 10 to 30 wt.% were incorporated. These prepared materials were characterized by powder XRD, adsorption-desorption of N₂ at 77 K, transmission and scanning electron microscopy (TEM and SEM) and X-rays photoelectron spectroscopy (XPS). The acidity was studied by thermo-programmed desorption of ammonia (NH₃-TPD). These materials were tested, after treatment with H₂SO₄, by 2-propanol dehydration and 1-butene isomerization catalytic tests. The samples were found quite good catalyst with strong acid sites, the sample with 20 wt.% of ZrO₂ being the better performing sample. Finally this material was successfully used as support for a CuO/CeO₂ system, with 6 wt.% of Cu and 20 wt.% of Ce. The resulting catalyst was tested in the preferential oxidation of CO (CO-PROX) attaining conversions close to 100% and high selectivity to CO₂.     

Overcoming matrix effects using the dilution approach in multiresidue methods for fruits and vegetables

During recent years matrix effects in liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) have quickly become a major concern in food analysis. The phenomenon of ion suppression can lead to errors in the quantification of the analytes of interest, as well as can affect detection capability, precision, and accuracy of the method. Sample dilution is an easy and effective method to reduce interfering compounds, and so, to diminish matrix effects. In this work, matrix effects of 53 pesticides in three different matrices (orange, tomato and leek) were evaluated. Several dilutions of the matrix were tested in order to study the evolution of signal suppression. Dilution of the extracts led to a reduction of the signal suppression in most of the cases. A dilution factor of 15 demonstrated to be enough to eliminate most of the matrix effects, opening the possibility to perform quantification with solvent based standards in the majority of the cases. In those cases where signal suppression could not be reduced, a possible solution would be to use stable isotope-labelled internal standards for quantification of the problematic pesticides.     

UV absorption cross sections between 230 and 350 nm and pressure dependence of the photolysis quantum yield at 308 nm of CF3CH2CHO

Ultraviolet (UV) absorption cross sections of CF(3)CH(2)CHO were determined between 230 and 350 nm by gas-phase UV spectroscopy. The forbidden n → π* transition was characterized as a function of temperature (269-323 K). In addition, the photochemical degradation of CF(3)CH(2)CHO was investigated at 308 nm. The possible photolysis channels are: CF(3)CH(2) + HCO , CF(3)CH(3) + CO , and CF(3)CH(2)CO + H . Photolysis quantum yields of CF(3)CH(2)CHO at 308 nm, Φ(λ=308nm), were measured as a function of pressure (25-760 Torr of synthetic air). The pressure dependence of Φ(λ=308nm) can be expressed as the following Stern-Volmer equation: 1/Φ(λ=308nm) = (4.65 ± 0.56) + (1.51 ± 0.04) × 10(-18) [M] ([M] in molecule cm(-3)). Using the absorption cross sections and the photolysis quantum yields reported here, the photolysis rate coefficient of this fluorinated aldehyde throughout the troposphere was estimated. This calculation shows that tropospheric photolysis of CF(3)CH(2)CHO is competitive with the removal initiated by OH radicals at low altitudes, but it can be the major degradation route at higher altitudes. Photodegradation products (CO, HC(O)OH, CF(3)CHO, CF(3)CH(2)OH, and F(2)CO) were identified and also quantified by Fourier transform infrared spectroscopy. CF(3)CH(2)C(O)OH was identified as an end-product as a result of the chemistry involving CF(3)CH(2)CO radicals formed in the OH + CF(3)CH(2)CHO reaction. In the presence of an OH-scavenger (cyclohexane), CF(3)CH(2)C(O)OH was not detected, indicating that channel (R1c) is negligible. Based on a proposed mechanism, our results provide strong evidences of the significant participation of the radical-forming channel (R1a).     

Assembling a Phthalocyanine and Perylenediimide Donor–Acceptor Hybrid through a Platinum(II) Diacetylide Linker

In a novel electron‐donor–acceptor conjugate, phthalocyanine (Pc) and perylenediimide (PDI) are connected through a trans‐platinum(II) diacetylide linker to yield Pc‐Pt‐PDI 1 . In the ground state, the presence of Pt^II disrupts the electronic communication between the two electroactive components, as revealed by UV/Vis spectroscopy and electrochemical studies. The photophysical behavior of 1 is compared with that of the corresponding Pc‐PDI electron‐donor–acceptor conjugate 2 in terms of charge separation and charge recombination. The insertion of Pt^II between Pc and PDI impacts the results in a longer‐lived Pc ^{. +}/PDI ^{. ?} radical ion‐pair state. In addition, the intermediately formed Pc triplet excited state is formed with higher quantum yields in 1 than in 2 .     

Conformational flexibility of a synthetic glycosylaminoglycan bound to a fibroblast growth factor. FGF-1 recognizes both the (1)C(4) and (2)S(O) conformations of a bioactive heparin-like hexasaccharide

The first direct NMR determination of the conformation of a conformationally flexible heparin-like hexasaccharide bound to a key receptor, FGF-1, is described. The determination has been based on the use of a 13C-labeled protein and a regular 12C sugar. FGF-1 recognizes several conformations of the iduronic moieties of the hexasaccharide. Therefore, this case is different than that described for the controversial recognition of heparin-like saccharides by AT-III, which seems to recognize just one conformation of the iduronic acid residues.     

A family of alkynylgold(III) complexes [AuI(mu-{CH2}2PPh2)2Au(III)(C triple bond CR)2] (R = Ph, tBu, Me3Si): facile and reversible comproportionation of gold(I)/gold(III) to digold(II)

The symmetric digold(II)dichloride bis(ylide) complex [Au2Cl2(mu-{CH2}2PPh2)2] reacts with acetylides to form the asymmetric heterovalent gold(I)/gold(III) complexes [AuI(mu-{CH2}2PPh2)2AuIII(CCR)2] [R = Ph, tBu, and SiMe3], the phenyl analogue of which was characterized by X-ray crystallography. These compounds represent the first examples of gold(III) complexes containing two acetylide ligands. [AuI(mu-{CH2}2PPh2)2AuIII(CCPh)2] undergoes a reversible comproportionation reaction upon treatment with [Ag(ClO4)tht] to give the symmetric digold(II) cationic complex [Au2(tht)2(mu-{CH2}2PPh2)2](ClO4)2. If this complex is treated with phenylacetylene in the presence of base, the heterovalent gold(I)/gold(III) complex is re-formed. This reversible interconversion between binuclear gold(I)/gold(III) and digold(II) bis(ylide) complexes is unprecedented.     

Mono- and Di-Fucosylated Glycans of the Parasitic Worm S. mansoni are Recognized Differently by the Innate Immune Receptor DC-SIGN

The parasitic worm, Schistosoma mansoni, expresses unusual fucosylated glycans in a stage-dependent manner that can be recognized by the human innate immune receptor DC-SIGN, thereby shaping host immune responses. We have developed a synthetic approach for mono- and bis-fucosylated LacdiNAc (LDN-F and LDN-DF, respectively), which are epitopes expressed on glycolipids and glycoproteins of S. mansoni. It is based on the use of monosaccharide building blocks having carefully selected amino-protecting groups, facilitating high yielding and stereoselective glycosylations. The molecular interaction between the synthetic glycans and DC-SIGN was studied by NMR and molecular modeling, which demonstrated that the α1,3-fucoside of LDN-F can coordinate with the Ca²⁺-ion of the canonical binding site of DC-SIGN allowing for additional interactions with the underlying LDN backbone. The 1,2-fucoside of LDN-DF can be complexed in a similar manner, however, in this binding mode GlcNAc and GalNAc of the LDN backbone are placed away from the protein surface resulting in a substantially lower binding affinity. Glycan microarray binding studies showed that the avidity and selectivity of binding is greatly enhanced when the glycans are presented multivalently, and in this format Le^x and LDN-F gave strong responsiveness, whereas no binding was detected for LDN-DF. The data indicates that S. mansoni has developed a strategy to avoid detection by DC-SIGN in a stage-dependent manner by the addition of a fucoside to a number of its ligands.     

Optical Spectroscopy and Excited-State Dynamics of Eu3+-Doped Bismuth Borate Glasses Containing CuO

Bismuth borate glasses containing phosphors and luminescent rare-earths are of interest for applications in light-emitting devices. Herein, the influence of CuO impurities on red-emitting Eu³⁺-doped bismuth borate glasses of the 25Bi₂O₃-15BaO-10Li₂O-50B₂O₃ type was investigated by various spectroscopic methods. The glasses were prepared by the melt-quench technique and characterized by X-ray diffraction (XRD), Fourier transform-infrared (FT-IR) spectroscopy, UV/Vis optical absorption (OA), and photoluminescence (PL) spectroscopy including decay kinetics assessment. The XRD data confirmed the amorphous nature of the glasses whereas FT-IR spectra indicated the basic structural features of trigonal BO₃ units and BO₄ tetrahedra. The OA analysis showed that addition of CuO up to 0.5 mol% results in significant growth of the visible Cu²⁺ absorption band around 715 nm, with slight decrease in the optical band gap energies assessed through Tauc plots. A drastic PL quenching of Eu³⁺ ions emission was evidenced concurring with the detrimental effect of Cu²⁺. The assessment of the Eu³⁺ emission decay curves revealed significant lifetime decrease of the ⁵D₀ emitting state with increasing CuO concentration. An analysis of quenching constants was finally performed comparing results from integrated PL data with the emission decay rates. It is argued that the bismuth borate glass system supports an effective Eu³⁺→Cu²⁺ energy transfer (more so than phosphates) in connection with a strong spectral overlap between Eu³⁺ emission and Cu²⁺ absorption.     

Majolica ware in the New Spain: an evaluation through NAA

The results of a study about Majolica ceramics recovered from three sites located in Mexico City are here presented. The set of 83 samples includes several local ceramic-types dating from the Colonial Period, the nineteenth century and the present day, plus some foreign specimens and clay samples from the Puebla area. Fourteen chemical elements present in the samples were analyzed and measured by means of neutron activation, and statistically the following groups were established: two groups that were presumably manufactured in Mexico City, two from Puebla, one from outside the Mexican boundaries, most probably Sevilla-Triana pottery, plus three more groups from unidentified origins. It was also found out that botijas were both imported and produced domestically. These results are discussed against the relevant literature on known provenance, chronology and manufacture standards of this kind of pottery.