羧基膦－钯－酸体系催化烯烃氢酯基化反应

以钯－膦－酸体系催化烯烃氢酯基化的反应日显重要，而膦配体是决定此反应的重要因素，用二苯基膦乙酸（ＤＰＡ）为配体的钯催化剂体系，对烯烃的氢酯基化反应作了研究。对影响反应的各种因素如反应温度、反应压力、不同的溶剂、膦配体及酸助剂的量等作了考察，发现此配体对烯烃的区域选择性有改善。并用此催化体系对不同结构的烯烃进行了研究，发现有如下的活性顺序：环烯烃＞直链端烯＞直链内烯。     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

硼离子对铕掺杂SiO2干凝胶发光性能的影响

采用溶胶-凝胶法制备了Al单掺和B，Al共掺的Eu掺杂SiO2干凝胶。利用荧光光谱、IR，XRD，DSC，TG／DTG等技术研究了硼离子、退火温度对样品发光性质的影响。经500℃以上退火处理用248nm激发的样品，产生Eu^3＋离子^5D0→^7FJ的特征发射，^5D0→^7F1的跃迁分裂为两个峰。比较615nm处的发光强度，掺硼酸样品的发光强度是不加硼酸发光强度的3．3倍。这是因为B离子的加入，在材料中形成了Si—O—B键，破坏了网络的对称性，加强了Eu^3＋的红光发射。当退火温度上升到850℃用350nm激发时，样品有很强的Eu^2＋蓝光发射。Al单掺的发射中心在437nm处，发射半峰宽约为70nm，而B，Al共掺样品的发光中心蓝移到425nm处，单掺样品的蓝光强度几乎是共掺样品强度的2倍。这是由于硼酸的加入改变了基质的网络结构，从而导致单掺和共掺样品发射峰位和强度的改变。     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

Magic-angle spinning solid-state NMR spectroscopy of the beta1 immunoglobulin binding domain of protein G (GB1): 15N and 13C chemical shift assignments and conformational analysis

Magic-angle spinning solid-state NMR (SSNMR) studies of the beta1 immunoglobulin binding domain of protein G (GB1) are presented. Chemical shift correlation spectra at 11.7 T (500 MHz 1H frequency) were employed to identify signals specific to each amino acid residue type and to establish backbone connectivities. High sensitivity and resolution facilitated the detection and assignment of every 15N and 13C site, including the N-terminal (M1) 15NH3, the C-terminal (E56) 13C', and side-chain resonances from residues exhibiting fast-limit conformational exchange near room temperature. The assigned spectra lend novel insight into the structure and dynamics of microcrystalline GB1. Secondary isotropic chemical shifts report on conformation, enabling a detailed comparison of the microcrystalline state with the conformation of single crystals and the protein in solution; the consistency of backbone conformation in these three preparations is the best among proteins studied so far. Signal intensities and line widths vary as a function of amino acid position and temperature. High-resolution spectra are observed near room temperature (280 K) and at <180 K, whereas resolution and sensitivity greatly degrade substantially near 210 K; the magnitude of this effect is greatest among the side chains of residues at the intermolecular interface of the microcrystal lattice, which we attribute to intermediate-rate translational diffusion of solvent molecules near the glass transition. These features of GB1 will enable its use as an excellent model protein not only for SSNMR methods development but also for fundamental studies of protein thermodynamics in the solid state.     

Synthesis, crystal structure and in vitro antitumor activity of di-n-butyltin 4′-(7-oxabicyclo [2,2,1]-5-heptane-2,3-dicarboximide) benzoates

Dibutyltin(IV) oxide reacts with the cantharidin analogue, 4′-(7-oxabicyclo [2,2,1]-5-heptane-2,3-dicarboximide) benzoic acid, A, to give the complexes [(p-C₈H₈NO₃-C₆H₄-COOBu₂Sn)₂O]₂ (1) and (p-C₈H₈NO₃-C₆H₄-COO)₂SnBu₂ (2) which had been characterized by IR and ¹H, ¹³C, ¹¹⁹Sn NMR. Single X-ray crystal structure analysis has been determined for compound (1), which was analogue to most other [(RCOOBu₂Sn)₂O]₂. The dimer features central of Bu₄Sn₂O₂ unit with the two Bu₂Sn groups being linked via bridging oxygen atom. Each tin atom adopts distorted trigonal bipyramidal structures via two carbons from a dibutyl moiety and three oxygen atoms from cantharidin derivative and bridging oxygen atom. In vitro tests show compounds 1 and 2 exhibit high cytotoxicity against P388 and HL-60.     

Self-assembly of a novel series of hetero-duplexes driven by donor-acceptor interaction

The self-assembly of a novel series of donor-acceptor interaction-driven artificial hetero-duplexes in organic media has been described. Four linear compounds 1a-1d, bearing two to five electron rich 1,5-dioxynaphthalene units connected by the tetra(ethylene glycol) linker, respectively, have been prepared and used as donors, while eight compounds 2a-2d, 13-16, bearing one to four electron deficient pyromellitic diimide, 1,4,5,8-naphthalene-tetracarboxydiimide, or perylene-3,4,9,10-tetracarboxydiimide units, respectively, have been used as acceptors. The structure of the hetero-duplexes has been characterized by the ¹H NMR, UV-vis spectroscopy and vapor pressure osmometry. It is revealed that the binding stability of the duplexes vary greatly, depending on the length and structure of the monomers and also the solvent, and hetero-duplex 1d·2d displays a maximum association constant of ca. 1.0×10⁴ M⁻¹ in chloroform.     

Calculations on the octupolar molecules with enhanced two-photon absorption cross sections based on the Zn (II) and Cu (I) as centers

The equilibrium geometries, electronic structures, as well as one- and two-photon absorption cross sections of a series of octupolar chromophores with Zn(2+) or Cu(+) as coordinate centers and 4,4'-bis(dibutylaminostyryl)-[2,2']-bis(bipyridyl) as ligands have been determined by using B3LYP/6-31G and ZINDO methods. These molecules are designed by controlled combination of two or three bipyridyl ligands with the metal centers. The results show that Zn(2+) is an effective template for the design of octupolar structures which enable it to form tetrahedral and octahedral coordinated complexes; while Cu(+) only exists in a tetrahedral coordinated complex, comparing the tetrahedral complex with Zn(2+) as the center with that of Cu(+) as the center, it is found that the complex with the Cu(+) center is a better two-photon absorption material than the former as far as the transparency/nonlinearity is concerned. Furthermore, for the same metal center of Zn(2+), both one- and two-photon absorptions of the tetrahedral complex are redshifted relative to those of the octahedral complex, is attributed to the spiroconjugation effect in the tetrahedral complex. Our theoretical findings are consistent with recent experimental observations and provide an important foundation for the design of improved transparency-nonlinearity two-photon absorption materials.     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

丙烯聚合络合催化剂形成过程的研究

以倍半物为还原剂还原TiCl_4,经异戊醚络合处理,然后在TiCl_4己烷溶液中35℃条件下热处理,制得对丙烯聚合具有高活性和高定向度的络合催化剂。研究了制备过程中各步反应产物的组成和结构特征,并讨论了TiCl_3低温晶型转变机理。