铜-康铜热电偶的低温不均匀性实验研究

从冰点到液氮温度的宽低温区内,对随机选取的铜-康铜热电偶进行了重复性精度标定.测试结果表明,多次断偶重复焊接行为将产生约0.272 mV的标准差.这意味着在液氮条件下,温度测量过程的最大误差将达8.98 ℃.所以,对现场、尤其对深冷区的现场进行精确测温实验中出现的断偶故障,重新焊接后必须重新标定才能继续使用.     

Thermal and carrier transport originating from photon recycling and non-radiative recombination in laser micromachining of GaAs thin films

Coupled thermal and carrier transports (electron/hole generation, recombination, diffusion and drifting) in laser photoetching of GaAs thin film is investigated. A new volumetric heating mechanism originating from SRH (Shockley–Read–Hall) non-radiative recombination and photon recycling is proposed and modeled based on recent experimental findings. Both volumetric SRH heating and Joule heating are found to be important in the carrier transport, as well as the etching process. SRH heating and Joule heating are primarily confined within the space-charge region, which is about 20 nm from the GaAs surface. The surface temperature rises rapidly as the laser intensity exceeds 10⁵ W/m². Below a laser intensity of 10⁵ W/m², the thermal effect is negligible. The etch rate is found to be dependent on the competition between photovoltaic and photothermal effects on surface potential. At high laser intensity, the etch rate is increased by more than 100%, due to SRH and Joule heating. Received: 24 January 2002 / Accepted: 11 April 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +1-310/206-2302, E-mail: xiang@seas.ucla.edu     

Hydrogen indium vacancy complex VInH4 in n-type InP studied by positron-lifetime

Positron-lifetime experiments have been carried out on two undoped n-type liquid encapsulated Czochralski (LEC)-grown InP samples with different stoichiometric compositions in the temperature range 10-300 K. For temperatures below 120 K for P-rich InP and 100 K for In-rich InP, the positron average lifetime began to increase rapidly and then leveled off, which was associated with the charge state change of hydrogen indium vacancy complexes from (V_InH₄)⁺ to (V_InH₄)⁰. This phenomenon was more obvious in P-rich samples that have a higher concentration of V_InH₄. The transformation temperature of approximately 120 K suggests that the complex V_InH₄ is a donor defect and that the ionization energy is about 0.01 eV. The ionization of neutral V_InH₄ accounted for the decrease of the positron average lifetime when the sample was illuminated with a photon energy of 1.32 eV at 70 K. These results provide evidence for hydrogen complex defects in undoped LEC InP.     

Structural and upconversion fluorescence properties of Er/Yb-codoped oxychloride lead-germanium-bismuth glass

Structural and infrared-to-visible upconversion fluorescence properties of Er³⁺/Yb³⁺-codoped oxychloride lead-germanium-bismuth glass have been studied. The Raman spectrum investigation indicates that PbCl₂ plays an important role in the formation of glass network, and has an important influence on the upconversion luminescence owing to lower phonon energy. Intense green and red emissions centered at 525, 546, and 657 nm, corresponding to the transitions ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2, respectively, were observed at room temperature. The quadratic dependence of the 525, 546, and 657 nm emissions on excitation power indicates that a two-photon absorption process occurs under 975 nm excitation.     

The structure-tunable synthesis and magnetic properties of Fe3O4 nanocrystals

Magnetite nanocrystals with tunable crystalline structures (orthorhombic and cubic) were synthesized via a simple oxidation-coprecipitation approach basing on the reaction of FeSO₄·7H₂O with C₆H₁₂N₄. The average diameter of prepared orthorhombic Fe₃O₄ nanorods were 15 nm while their lengths were approximately 150~200 nm. As-prepared cubic counterparts were composed of 10 nm sized nanoparticles. XRD, FESEM, TEM, SAED and HRTEM were then used to characterize our samples. In addition, magnetic measurements showed the saturation magnetization of orthorhombic magnetite was lower than that of cubic ones. Mössbauer spectroscopy verified the samples possessed the nature of cubic magnetite. Finally, a possible growth mechanism for orthorhombic nanorods and cubic nanoparticles was also discussed.     

A fractional order hyperchaotic system derived from Liu system and its circuit realization

In this paper we propose a novel four-dimensional fractional order hyperchaotic system derived from Liu system. Electronics workbench (EWB) and Matlab simulations show the dynamical behavior of the proposed four-dimensional fractional order hyperchaotic system. Finally, after separately using EWB and Matlab, an electronic circuit is designed to realize the novel four-dimensional fractional order hyperchaotic system and the experimental circuit results are obtained which are identical to software simulations.     

Efficient three-step entanglement concentration for an arbitrary four-photon cluster state

We propose an entanglement concentration protocol to concentrate an arbitrary partially-entangled four-photon cluster state.As a pioneering three-step entanglement concentration scheme,our protocol only needs a single-photon resource to assist the concentration in each step,which makes this protocol more economical.With the help of the linear optical elements and weak cross-Kerr nonlinearity,one can obtain a maximally-entangled cluster state via local operations and classical communication.Moreover,the protocol can be iterated to obtain a higher success probability and is feasible under current experimental conditions.     

Adaptive control of bifurcation and chaos in a time-delayed system

In this paper, the stabilization of a continuous time-delayed system is considered. To control the bifurcation and chaos in a time-delayed system, a parameter perturbation control and a hybrid control are proposed. Then, to ensure the asymptotic stability of the system in the presence of unexpected system parameter changes, the adaptive control idea is introduced, i.e., the perturbation control parameter and the hybrid control parameter are automatically tuned according to the adaptation laws, respectively. The adaptation algorithms are constructed based on the Lyapunov-Krasovskii stability theorem. The adaptive parameter perturbation control and the adaptive hybrid control methods improve the corresponding constant control methods. They have the advantages of increased stability, adaptability to the changes of the system parameters, control cost saving, and simplicity. Numerical simulations for a well-known chaotic time-delayed system are performed to demonstrate the feasibility and superiority of the proposed control methods. Besides, comparison of the two adaptive control methods are made in an experimental study.     

Average consensus of multi-agent systems with communication time delays and noisy links

In this paper,we consider the average-consensus problem with communication time delays and noisy links.We analyze two different cases of coupling topologies:fixed and switching topologies.By utilizing the stability theory of the stochastic differential equations,we analytically show that the average consensus could be achieved almost surely with the perturbation of noise and the communication time delays even if the time delay is time-varying.The theoretical results show that multi-agent systems can tolerate relatively large time delays if the noise is weak,and they can tolerate relatively strong noise if the time delays are low.The simulation results show that systems with strong noise intensities yield slow convergence.     

Comparative investigation of resistance and ability to trigger high voltage discharge for single and multiple femtosecond filaments in air

A comparative investigation of resistance and ability to trigger high voltage (HV) discharge for single filament (SF) and multiple filaments (MF) has been carried out. The experimental results show that the trend of the breakdown threshold of the SF exactly follows that of its resistance, but this is not the case for the MF. The MF's resistance is much smaller than SF's. However, the MF shows a bit higher HV breakdown threshold than the SF. The underlying physics is that the measured resistance of the MF is collectively contributed by every filament in the MF while the HV breakdown threshold is determined by only one single discharging path.