大气压下氮气介质阻挡微放电中分子振动温度的时间分辨

使用针-板式电极装置,在大气压氮气介质阻挡微放电中,通过对氮分子第二正带系（C3Πu→B3Πg）发射光谱的时间分辨谱线进行分析,根据振动带序发射光谱强度计算得出N2（C,ν）振动温度,并研究了不同压强及放电电压对氮分子（C3Πu）的振动温度时间分辨的影响。实验结果表明：氮分子振动温度的范围为2 000～3 500 K,在每半个放电周期内都呈减小趋势,且正负半周期振动温度差较大,负半周期振动温度始终高于正半周期;振动温度随电压升高而升高,随压强的升高而降低。     

斜入射脉冲X射线产生电流实验

针对斜入射脉冲X射线与金属的几种可能相互作用机制,设计了实验布局,测量了斜入射X射线在金属靶上产生的脉冲电流,建立了相应的理论模型。结果显示,当X射线入射强度低于105 W/cm2时,以光电效应为主,高于此值时,以热电效应为主导。这表明,X射线加载强度较弱时,电子表现出个体行为,而增大X射线入射强度,电子表现出弱关联集体行为。由此可以预测,超强X射线辐照下,金属表面将出现宏观尺度的电荷密度调制,在退激发过程中,这种调制状态可能以较高的效率辐射定向的微波电磁脉冲。     

A first-principles study on the lower-valence coexisting Cr2TiX (X=Al, Ga, Si, Ge, Sn, Sb) Heusler alloys

The electronic, magnetic, and bonding properties of the Cr₂TiX (X=Al, Ga, Si, Ge, Sn, Sb) Heusler alloys have been investigated using first-principles calculations. The results show that Cr₂TiSb exhibits a half-metallic nature and Cr₂TiGa and Cr₂TiSn exhibit a nearly half-metallic nature. From analysis of the density of states and the electron density difference along the Ga→Sn→Sb series for sp atoms, we found that the Cr-Ti bond demonstrates covalent character with more or less the ionic and metallic nature. In addition, the Cr-Ti bonding strength increases along this series. All the compounds have a negative total magnetic moment, most of which are confined to the Cr atoms. There exists a 1.0μ_B increasing trend of the total moment along the III→IV→V main group for sp atoms, and only the total moment of Cr₂TiSb coincides well with the Slater-Pauling behavior.     

Polarization phase-shifting Jamin shearing interferometer

The Jamin shearing interferometer is very useful in wavefront testing, especially for the low coherent light. Based on this interferometer, a polarization phase-shifting Jamin shearing interferometer is proposed to improve the performance. In the interferometer, two interference beams are linearly polarized and a polarization phase shifter is applied to realize the phase shifting. Different types of configurations of the interferometer are given. With phase-shifting interferograms, the precision of the interferometer can be improved. The interferometer is kept as an equal optical path system and its shearing amount remains changeable with simple structure and easy operation. In experiments, phase-shifting interferograms are obtained by rotating the analyzer. The usefulness of the interferometer is verified.     

用布里渊散射测量水的体粘滞系数

提出了一种直接测量水的体粘滞系数的实验方法－布里渊散射方法,通过分析剪切粘滞系数和体粘滞系数与布里渊散射线宽的关系,得到了布里渊散射线宽和频移与水的体粘滞系数关系的公式,建立了实验测量水的体粘滞系数的基础,给出了不同温度下水的体粘滞系数的实验测量结果,估算了这种方法的测量误差,实验和理论分析都表明这是一种直接测量水的体粘滞系数的快速而精确的方法。     

等效质量模型中的重子质量谱

在等效质量模型框架下,考虑线性禁闭和一阶微扰相互作用的贡献并通过拟合$ \mathrm{p} $、$ \mathrm{n}$、$\Lambda$和$ \Delta $的质量来得到模型参数。发现,等效质量模型能够较好地给出符合实验的重子质量谱。而禁闭强度$D$、强耦合常数$\alpha_{\rm{s}}$以及夸克质量因子$f$与微扰强度$C$之间都存在关联,并能够很好地用解析公式逼近。除此之外,单胶子交换相互作用的色磁部分在重子质量谱中起着重要作用,从而使自旋$J=1/2$和3/2的重子之间的质量差最高达到300 MeV。为了更好地描述超子质量,对于包含奇异夸克的一对夸克间的相互作用我们进一步采用不同的强耦合常数,其具体的模型参数通过拟合$ \Sigma $和$ \Xi $的质量得到。基于本工作得到的等效质量模型参数组,能够更好地描述$ \mathrm{ud}$夸克物质团、奇异子以及致密星。     

一种新型近共沸混合工质的循环性能实验研究

文中开展了对一种新型近共沸混合物的整机性能实验研究,该混合物具有零ODP值和低GWP值,可作为传统工质R502甚至是R404A的长期替代物。根据国标GB/T 5773-2004搭建了第二制冷剂量热器的整机性能测试实验台。试验在蒸发温度为-40℃的商用制冷温区进行,系统研究了在不同蒸发温度、冷凝温度、过冷度、过热度等工况下的性能。实验结果与R404A进行了比较,包括压比、压缩机功耗、制冷量、COP、吸气温度。实验结果表明,该新工质COP比R404A高9.2%至14.2%。     

Surface self-diffusion behavior of individual tungsten adatoms on rhombohedral clusters

The diffusion of single tungsten adatoms on the surfaces of rhombohedral clusters is studied by means of molecular dynamics and the embedded atom method. The energy barriers for the adatom diffusing across and along the step edge between a {110} facet and a neighboring {110} facet are calculated using the nudged elastic band method. We notice that the tungsten adatom diffusion across the step edge has a much higher barrier than that for face-centered cubic metal clusters. The result shows that diffusion from the {110} facet to a neighboring {110} facet could not take place at low temperatures. In addition, the calculated energy barrier for an adatom diffusing along the step edge is lower than that for an adatom on the flat (110) surface. The results show that the adatom could diffuse easily along the step edge, and could be trapped by the facet corner. Taking all of this evidence together, we infer that the {110} facet starts to grow from the facet corner, and then along the step edge, and finally toward the {110} facet center. So the tungsten rhombohedron can grow epitaxially along the {110} facet one facet at a time and the rhombohedron should be the stable structure for both large and small tungsten clusters.     

Sagnac棱镜角公差与干涉光谱仪光谱分辨率的关系分析

根据干涉成像光谱仪光谱分辨率对角向差的要求,通过对实体Sagnac干涉仪结构和光路进行分析,从三个相互垂直的方向出发,研究了光谱分辨率和棱镜角公差之间存在的关系;并推导了满足光谱仪光谱分辨率要求的实体Sagnac干涉棱镜的角公差公式;用实例说明了关系式的应用方法,如果不考虑棱镜变形引起的色散及棱镜的面型误差和付氏镜的残余像差的影响,而只考虑棱镜的角误差对光谱分辨率的影响,则通常情况下干涉棱镜的角公差要求较严,约20″以内.     

脉冲激光频域干涉技术在超快动力学物理中的应用

介绍了一种具有fs时间分辨力的超短脉冲激光频域干涉测试技术,详细论述了该技术的工作原理和系统构成,指出传输时间差和相位差是影响频域干涉条纹周期的主要因素。采用脉冲激光频域干涉仪测量了200 nm厚度铝膜在波长800 nm、单脉冲能量0.7 mJ、脉宽35 fs脉冲激光作用下的运动速度剖面。在单次飞秒脉冲激光作用下,铝膜自由面的运动速度峰值可达960 m/s,速度剖面的上升前沿小于5.77 ps,表明脉冲激光频域干涉技术可用于测量材料在超快脉冲激光作用下的冲击动力学参数。