内源全息术的原理和数学描述

以往的全息术在对原子成像时,在相干光源、探测器空间分辨和信号强度三个方面遇到了难以克服的困难. 阐述了内源全息术克服这些困难的原理,研究了内源全息术的记录和再现全过程,推导出内源球面全息图的再现公式,并在散射因子球对称近似和能量无关近似下,推导出以δ函数表示原子全息再现像的解析表达式. 关键词： 内源全息术 同步辐射 晶体结构 傅里叶变换     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Linearized and rational approximation method for solving non‐linear Burgers' equation

A new numerical method called linearized and rational approximation method is presented to solve non‐linear evolution equations. The utility of the method is demonstrated for the case of differentiation of functions involving steep gradients. The solution of Burgers' equation is presented to illustrate the effectiveness of the technique for the solution of non‐linear evolution equations exhibiting nearly discontinuous solutions. Copyright © 2004 John Wiley & Sons, Ltd.     

白光干涉条纹变密的原因探讨

讨论了在测定透明介质折射率的过程中彩色条纹变密的现象，并在其基础上分析其成因：一是由于媒质折射率加大；二是由于平形板介质平行度不好造成楔形的倾角变大，最后在实验中验证了理论结果。     

New data on the ternary fission of 252Cf from the Gammasphere facility

Ternary fission of ²⁵²Cf was studied at Gammasphere using eight ΔE×E particle telescopes. Helium, beryllium, boron, and carbon light charged particles (LCPs) emitted with kinetic energy more than 9, 21, 26, and 32 MeV, respectively, were identified. The 3368-keV γ transition from the first 2⁺ excited state in ¹⁰Be was found and the population probability ratio N(2⁺)/N(0⁺) = 0.160 ± 0.025 was estimated. No evidence was found for 3368-keV γ rays emitted from a triple molecular state. For the first time, charge distributions are obtained for ternary fission fragments emitted with helium, beryllium, and carbon LCPs.     

Convergence rate of the best-r-point-average estimator for the maximizer of a nonparametric regression function

The best-r-point-average (BRPA) estimator of the maximizer of a regression function, proposed in Changchien (in: M.T. Chao, P.E. Cheng (Eds.), Proceedings of the 1990 Taipei Symposium in Statistics, June 28–30, 1990, pp. 63–78) has certain merits over the estimators derived through the estimation of the regression function. Some of the properties of the BRPA estimator have been studied in Chen et al. (J. Multivariate Anal. 57 (1996) 191) and Bai and Huang (Sankhya: Indian J. Statist. Ser. A. 61 (Pt. 2) (1999) 208–217). In this article, we further study the properties of the BRPA estimator and give its convergence rate under some quite general conditions. Simulation results are presented for the illustration of the convergence rate. Some comparisons with existing estimators such as the Müller estimator are provided.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

相对论速调管放大器辐射频率可调性机理

 用场方法研究了相对论速调管放大器辐射频率的可调性。发现调制电流频率的可调性与一阶Bessel函数的周期相关，对应相同的一阶Bessel函数值，可以有多个不同数值的宗量，调制电流的频率与Bessel函数宗量数值包括中间腔与提取腔之间的距离和电子束的传输速度等因素相联系。理论估计的调制电流频率可调范围与实验测得的结果符合得很好。相对论速调管放大器辐射频率的可调性还取决于提取腔的设计。     

一种基于代价函数和模糊熵的图像分割方法

提出了一种基于代价函数和模糊熵的图像分割方法.该方法先用代价函数最小化法对退化的图像作预处理,之后,利用模糊熵作进一步的处理.实验结果表明:新方法和一般的阈值分割方法相比,不但分割图像的错分率较小,而且图像的视觉效果也有较大的改善.     

Immersed essential surfaces and Dehn surgery

It is known that an embedded essential surface F in a hyperbolic manifold M remains essential in Dehn filling spaces M(γ) for most slopes γ on a torus boundary component T of M. The main theorem of this paper is to generalize this result to immersed surfaces. More explicitly, if an immersed essential surface F has coannular slopes β₁,…,β_n on T, then there is a constant K such that F remains essential in M(γ) when Δ(γ,β_i)>K for all i. It will also be shown that all but finitely many Freedman tubings of a geometrically finite surface in M are π₁-injective.