Mesoporous silica nanospheres with the ability of photo-driven releasing sandela 803 for the application to wallpaper

Mesoporous silica nanospheres loaded with sandela 803 (S803@MS-S) are prepared for application to wallpaper. The nano-fragrance has high encapsulation efficiency and property of photo-driven release.     

流动注射化学发光法测定甲氨蝶呤

研究了甲醛增强高锰酸钾与甲氨蝶呤的化学发光反应，由此建立了一种测定甲氨蝶呤的流动性注射化学发光分析法，方法的检出限为３．４×１０＾－９ｇ／ｍＬ，相对标准偏差为１．１％（２．０×１０＾－６ｇ／ｍＬ甲氨蝶呤，ｎ＝１１）线性范围为１．０×１０＾－８～１．０×１０＾－５ｇ／ｍＬ。该法已用于甲氨蝶呤针剂及片剂中甲氨蝶呤含量的测定。     

Mo－Cu－S原子簇化合物［Mo_2Cu_6S_6（SCMe_3）_2（O）_

基于标题簇合物的快原子质谱研究，提出该二簇合物在质谱过程中的可能断裂途径及其簇骼转换的相关性。     

Electrochemical reduction and voltammetric determination of metronidazole at a nanomaterial thin film coated glassy carbon electrode

Simple and sensitive electrochemical method for the determination of metronidazole, based on a nanostructured film coated glassy carbon electrode (GCE), is described. Multi-walled carbon nanotubes (MWNT) was dispersed into water in the presence of a hydrophobic surfactant to give very stable and homogeneous MWNT suspension, and a MWNT-film coated GCE was achieved via evaporating solvent. Metronidazole yields a well-defined reduction peak whose potential is −0.71 V at the MWNT-film coated GCE in pH 9.0 Britton-Robinson buffer. Compared with bare GCE, the MWNT-film modified GCE significantly enhances the reduction peak current of metronidazole. All the experimental parameters were optimized for the determination of metronidazole. The detection limit is 6×10⁻⁹ mol/l at 2 min accumulation. This method has been successfully used to determine metronidazole in the drugs. Furthermore, results obtained by the proposed method have been compared with spectrophotometric method.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

微波照射合成不对称1，4－二氢吡啶的研究

微波照射合成不对称１，４－二氢吡啶的研究张雅文，沈宗旋，潘备，杨海康，陆新华，陆澄容（苏州大学化学系苏州２１５００６）关键词缩合，二氢吡啶，微波Ｈａｎｔｚｓｃｈ合成是制备１，４－二氢吡啶的经典方法。这一合成的改进方法之一是３－氨基巴豆酸酯与醛和乙酰乙...     

液相色谱专家系统中柱系统推荐规则的建立和验证

把分子结构和分子、离子静电作用力作为影响溶质保留值和选择性的基本点,提出了液相色谱专家系统柱系统推荐的基本规则,由此可以从溶质所包含的基团或官能团的信息进行色谱柱系统推荐。为了验证这些规则的正确性,应用几类常用的或典型的样品从分子结构通道进行液相色谱柱系统推荐,获得满意的结果。     

Quantum-resolved fluorescence excitation spectra of SnO free radical

TheA ¹ –X ^{1 +} system of SnO is studied by laser- induced fluorescence excitation spectroscopy using isotopically enriched tin Sn¹¹⁶. The rotational structure analysis has been carried out for 6-0, 5-0, 2-0 bands. All these spectra were well resolved only with few perturbed lines in 2-0 band. Rotational constantsB ₂,B ₅,B ₆ and henceB _e , _{e e} have been obtained for the Sn¹¹⁶O molecule. An extension of perturbation study on 4-0 band has been made showing the maximum perturbation occurs at different J values for different isotopes.