Electrospinning of ultrafine cellulose acetate fibers: Studies of a new solvent system and deacetylation of ultrafine cellulose acetate fibers

Electrospinning of cellulose acetate (CA) in a new solvent system and the deacetylation of the resulting ultrafine CA fibers were investigated. Ultrafine CA fibers (∼2.3 μm) were successfully prepared via electrospinning of CA in a mixed solvent of acetone/water at water contents of 10–15 wt %, and more ultrafine CA fibers (0.46 μm) were produced under basic pH conditions. Ultrafine cellulose fibers were regenerated from the homogeneous deacetylation of ultrafine CA fibers in KOH/ethanol. It was very rapid and completed within 20 min. The crystal structure, thermal properties, and morphology of ultrafine CA fibers were changed according to the degree of deacetylation, finally to those of pure cellulose, but the nonwoven fibrous mat structure was maintained. The activation energy for the deacetylation of ultrafine CA fibers was 10.3 kcal/mol. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 5–11, 2004     

A Note on Geometric Structures of Linear Ordered Orthogonal Arrays and (T,M,S)-Nets of Low Strength

The equivalent geometrical configurations of linear ordered orthogonal arrays are determined when their strengths are 3 and 4. Existence of such geometrical configurations is investigated. They are also useful in the study of (T, M, S)-nets.     

防紫外线伞ATR-OMNI采样器的FTIR分析

本实验使用OMNI采样器，直接对伞面内外进行单反射ATR的分析，快速、简便、不破坏样品，得到分辨率很好的红外图谱，再配合红外谱库的谱图检索，可以分别得到匹配率95％以上的尼龙－6和聚酯型聚氨酯的分析结果。     

X分形晶格上Gauss模型的临界性质

采用实空间重整化群变换的方法,研究了2维和d(d>2)维X分形晶格上Gauss模型的临界性质.结果表明:这种晶格与其他分形晶格一样,在临界点处,其最近邻相互作用参量也可以表示为K=bqiqi(qi是格点i的配位数,bqi是格点i上自旋取值的Gauss分布常数)的形式;其关联长度临界指数v与空间维数d(或分形维数df)有关.这与Ising模型的结果存在很大的差异. 关键词： X分形晶格 重整化群 Gauss模型 临界性质     

Changes in the spectrum of Gaussian Schell-model beams propagating through turbulent atmosphere

Based on the extended Huygens-Fresnel principle, the spectrum of Gaussian Schell-model (GSM) beams propagating through turbulent atmosphere is derived analytically. It is shown that, if the scaling law is valid, the normalized spectrum S(ω) of GSM beams propagating through turbulent atmosphere is the same as the normalized source spectrum S⁽⁰⁾(ω), whether GSM source is quasi-homogenous or not. On the other hand, if the scaling law fails, S(ω) of GSM is different from S⁽⁰⁾(ω). The structure constant of the refractive index, transverse coordinate of observation point and spatial correlation length of the source affect the spectrum, which is illustrated numerically.     

Controlling global stochasticity of Hamiltonian systems by nonlinear perturbation

A method of controlling global stochasticity in Hamiltonian systems by applying nonlinear perturbation is proposed. With the well-known standard map we demonstrate that this control method can convert global stochasticity into regular motion in a wide chaotic region for arbitrary initial condition, in which the control signal remains very weak after a few kicks. The system in which chaos has been controlled approximates to the original Hamiltonian system, and this approach appears robust against small external noise. The mechanism underlying this high control efficiency is intuitively explained. Received 15 January 2002 Published online 6 June 2002     

Mössbauer and X-ray diffraction characterization of Fe60Al40 coatings prepared by thermal spraying

Microstructured (atomized) and nanostructured (milled) Fe₆₀Al₄₀ powders together with their corresponding coatings synthesized by High Velocity Oxy-fuel (HVOF) or Atmospheric Plasma Spray (APS) thermal spraying techniques have been characterized by Mössbauer Spectroscopy (MS) and X-ray Diffraction (XRD). The evolution of the microstructure and the atomic ordering degree in the powders and coatings are discussed at the light of the various processing conditions. The operational correlation between the parameters of the duplex morphology of coatings and the processing parameters is discussed.     

Compact, reliable asymmetric optical configuration for cost-effective fabrication of multiplex dot matrix hologram in anti-counterfeiting applications

This study presents a compact optical configuration that can generate a multiplex dot-matrix hologram with complex interlaced images for anti-counterfeiting applications on valuable paper. Varying the orientation of the interference plane can enable the multiplex hologram to be recorded without changing the interference angle of two laser beams. With its simple asymmetric optical setup, a multiplex hologram with many interlaced images can be efficiently fabricated, increasing the cost of imitation. Experimental details of the asymmetric optical setup are also described.     

Ab-initio molecular dynamics simulation on nano-system under external pressure

A new constant-pressure molecular dynamics (MD) method is developed to simulate the dynamic behavior and structure transition of finite system under external pressure. In this method, no artificial parameter is introduced and the computation overheads are very small. As an application, a hard-soft transition of single wall carbon nanotube (SWCNT) under external pressure is found, which is in agreement with the experiments.