Selenomethionine contents of NIST wheat reference materials

Values of the total selenium and selenomethionine (Semet) content of four wheat-based reference materials have been obtained by gas chromatography-stable isotope dilution mass spectrometry methods. The total Se method is an established one, and the results obtained with it are consistent with previously-assigned values. The Semet method (previously reported by our laboratory) is based on reaction with CNBr. Our data indicate that the four wheat samples (wheat gluten, durum wheat, hard red spring wheat, and soft winter wheat), though having a 30-fold range in total Se content, all have about 45% of their total Se values in the form of selenomethionine. Investigation of the CNBr-based method suggests that additional experiments are needed to verify that all selenomethionine in the wheat samples is accounted for, but also indicates that the values obtained are within 15% of the true values. As the form in which Se occurs in foods and dietary supplements is important from a nutritional perspective, adding information about Se speciation to total Se values in appropriate reference materials makes these materials more valuable in relevant analytical work.     

New example of a non-heme mononuclear iron(IV) oxo complex. Spectroscopic data and oxidation activity

The green complex S=1 [(TPEN)FeO]2+ [TPEN=N,N,N',N'-tetrakis(2-pyridylmethyl)ethane-1,2-diamine] has been obtained by treating the [(TPEN)Fe]2+ precursor with meta-chloroperoxybenzoic acid (m-CPBA). This high-valent complex belongs to the emerging family of synthetic models of Fe(IV)=O intermediates invoked during the catalytic cycle of biological systems. This complex exhibits spectroscopic characteristics that are similar to those of other models reported recently with a similar amine/pyridine environment. Thanks to its relative stability, vibrational data in solution have been obtained by Fourier transform infrared. A comparison of the Fe=O and Fe=(18)O wavenumbers reveals that the Fe-oxo vibration is not a pure one. The ability of the green complex to oxidize small organic molecules has been studied. Mixtures of oxygenated products derived from two- or four-electron oxidations are obtained. The reactivity of this [FeO]2+ complex is then not straightforward, and different mechanisms may be involved.     

PHOTOCHEMICAL INTERACTIONS BETWEEN NITROXIDE FREE RADICALS AND PHENOTHIAZINES IN SOLUTION

Abstract— Ultraviolet irradiation of photosensitive molecules like phenothiazine derivatives leads to the formation of short lived free radicals which are able to reduce stable nitroxide free radicals generally used as spin labels. The measurement of the electron spin resonance signal decay of nitroxides offers a tool for studying the photochemical reaction of phenothiazine derivatives in solution at room temperature, in a 10^-5 to 10^-2 M concentration range. Analysis of the reaction mechanism shows that the paramagnetic nitroxide is an efficient quencher of the phenothiazine triplet state; this reaction was used to demonstrate the influence of the solvent, quenching by oxygen and the role of the chemical structure of six phenothiazine derivatives on their photoreactivity in solution.     

Towards the Synthesis of Azoacetylenes

The synthesis of azoacetylenes (=dialkynyldiazenes) 1 and 2 has been investigated. They represent a still elusive class of chromophores with potentially very interesting applications as novel bistable photochemical molecular switches or as antitumor agents (Fig. 1). Our synthetic efforts have led us alongside three different approaches (Scheme 1). In a first route, it was envisioned to generate the azo (=diazene) bond by photolysis of N,N′‐dialkynylated 1,3,4‐thiadiazolidine‐2,5‐diones that are themselves challenging targets (Scheme 2). Attempts are described to obtain the latter by alkynylation of the parent heterocycle with substituted alkynyliodonium salts. In a conceptually similar approach, the no‐less‐challenging dialkynylated 9,10‐dihydro‐9,10‐diazanoanthracene ( 29 ) was to be generated by alkynylation of the unsubstituted hydrazine 28 (Scheme 6). In a second route, the generation of the N?N bond from Br‐substituted divinylidenehydrazines (ketene‐azines) 35 was attempted in a synthetic scheme involving an aza‐Wittig reaction between azinobis(phosphorane) 36 and (triisopropylsilyl)ketene 37 (Scheme 7). Finally, a third approach, based on the formation of the central azo bond as the key step, was explored. This route involved the extrapolation of a newly discovered condensation reaction of N,N‐disilylated anilines with nitroso compounds (Scheme 11, and Tables 1 and 2) to the transformation of N,N‐disilylated ynamine 55 and nitroso‐alkyne 54 (Scheme 13).     

Solvothermal Synthesis, Crystal Structure, and Properties of the First Zinc Containing Thioantimonate(III) [Zn( tren)] 2Sb 4S 8·0.75 H 2O

Yellow crystals of the title compound were obtained under solvothermal conditions reacting elemental Zn, Sb, and S in a solution of tris(2-aminoethyl)amine (=tren) and water. The compound crystallises in the monoclinic space group P2₁/c with a=13.0247(7), b=22.308(2), c=12.1776(6) Å, and =105.352(6)°. In the structure of [Zn(tren)]₂Sb₄S₈·0.75 H₂O two [Zn(tren)]²⁺ cations are bound to the [Sb₄S₈]^4– anion via S atoms. The Zn²⁺ ions are in a trigonal bipyramidal environment of four N atoms of the tetradentate tren ligand and one S atom of the [Sb₄S₈]^4– anion. The anion is formed by SbS₃ and SbS₄ units which share common corners and edges. The interconnection mode yields three different non-planar Sb₂S₂ heterorings. The shortest intermolecular Sb–S distance amounts to about 3.7Å, and taking this long separation into account undulated chains running along [001] are formed with the water molecules residing in the pocket-like cavities. Upon heating the compound decomposes in one step starting at about 240°C. The final decomposition product was identified as ZnS and Sb₂S₃ by X-ray powder diffractometry. Additionally, spectroscopic data as well as synthetic procedures for [Zn(tren)]₂Sb₄S₈·0.75 H₂O are reported.     

Determination of the thiol redox state of organisms: new oxidative stress indicators

This study describes a new methodology by which the concentrations of non-protein (NP) thiols glutathione (GSH), cysteine (CSH), N-acetylcysteine (AcCSH), and protein (P) thiols (PSH), as well as the contribution of these components to symmetric and mixed disulfides (NPSSR, NPSSC, NPSSCAc, PSSR, PSSC, PSSCAc, PSSP) can reliably be measured. The methodology consists of a strict sequence of methods which are applied to every sample. Free thiols at any given state of the procedure are measured by Ellmans assay, the CSH fraction is measured by its unique response in the ninhydrin assay, AcCSH is selectively measured with ninhydrin after enzymatic deacylation, proteins are separated from non-protein thiols/disulfides by precipitation with trichloroacetic or perchloric acid, disulfides are reduced into free thiols with borohydride, mixed disulfides between a protein and a non-protein component are measured by extracting the non-protein thiol from the protein pellet after borohydride treatment, and protein thiols/disulfides are measured after resolubilization of the protein pellet.When this method was applied to animal and fungal tissue, new molecular indicators of the thiol redox state of living cells were identified. The findings of the present study clearly show that the new parameters are very sensitive indicators of redox state, while at the same time the traditional parameters GSH and GSSG often remain constant even upon dramatic changes in the overall redox state of biological tissue. Therefore, unbiased assessment of the redox state also requires explicit measurement of its most sensitive thiol indicators.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Oxygenolysis of flavonoid compounds: DFT description of the mechanism for quercetin.

Flavonoids are naturally occurring phenol derivatives present in substantial amounts in a large variety of plants, fruits and vegetables daily eaten by humans. Most of these compounds exhibit several interesting biological activities, such as antiradical and antioxidant actions. Indeed, by complexation with specific enzymes, flavonoids are notably liable to metabolize molecular dioxygen. On the basis of experimental results describing oxygenolysis of the flavonoid quercetin, activated by the enzyme quercetin 2,3-dioxygenase (2,3-QD),ur attention has focused on the role of metal center in the activation of the substrate quercetin. Thus, in the present study, by means of DFT calculations at the B3LYP/ 6-31(+)G* level on model molecular systems, we describe different mechanisms for dioxygen metabolization by quercetin. Stationary points are described, and energetic and structural analyses along the reaction paths are reported. Our calculations show that the copper cation must act as an oxidant towards the substrate and that the reaction proceeds through a 1,3-cycloaddition.     

Synthesis and Conformational Switching of Partially and Differentially Bridged Resorcin[4]arenes Bearing Fluorescent Dye Labels. Preliminary Communication

We report the synthesis of modified Cram‐type cavitands bearing one or two fluorescent labels for single‐molecule spectroscopic studies of vase? kite conformational switching (Scheme 3). Syntheses were performed by stepwise bridging of the four couples of neighboring H‐bonded OH groups of resorcin[4]arene bowls (Schemes 2 and 3). The new substitution patterns enable the construction of a large variety of future functional architectures. ¹H‐NMR Investigations showed that the new partially and differentially bridged cavitands feature temperature‐ and pH‐triggered vase? kite conformational isomerism similar to symmetrical cavitands with four identical quinoxaline bridges (Table). It was discovered that vase? kite switching of cavitands is strongly solvent‐dependent.     

Free energy perturbation approach to the critical assessment of selective cyclooxygenase-2 inhibitors

The discovery of selective cyclooxygenase-2 (COX-2) inhibitors represents a major achievement of the efforts over the past few decades to develop therapeutic treatments for inflammation. To gain insights into designing new COX-2-selective inhibitors, we address the energetic and structural basis for the selective inhibition of COX isozymes by means of a combined computational protocol involving docking experiment, force field design for the heme prothetic group, and free energy perturbation (FEP) simulation. We consider both COX-2- and COX-1-selective inhibitors taking the V523I mutant of COX-2 to be a relevant structural model for COX-1 as confirmed by a variety of experimental and theoretical evidences. For all COX-2-selective inhibitors under consideration, we find that free energies of binding become less favorable as the receptor changes from COX-2 to COX-1, due to the weakening and/or loss of hydrogen bond and hydrophobic interactions that stabilize the inhibitors in the COX-2 active site. On the other hand, COX-1-selective oxicam inhibitors gain extra stabilization energy with the change of residue 523 from valine to isoleucine because of the formations of new hydrogen bonds in the enzyme-inhibitor complexes. The utility of the combined computational approach, as a valuable tool for in silico screening of COX-2-selective inhibitors, is further exemplified by identifying the physicochemical origins of the enantiospecific selective inhibition of COX-2 by -substituted indomethacin ethanolamide inhibitors.